From: Viresh Kumar <viresh.kumar@st.com>
To: <akpm@linux-foundation.org>
Cc: <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <mturquette@linaro.org>,
<sshtylyov@mvista.com>, <jgarzik@redhat.com>,
<linux@arm.linux.org.uk>, <spear-devel@list.st.com>,
<viresh.linux@gmail.com>, Viresh Kumar <viresh.kumar@st.com>
Subject: [PATCH V2 1/9] clk: Add non CONFIG_HAVE_CLK routines
Date: Tue, 24 Apr 2012 11:26:09 +0530 [thread overview]
Message-ID: <4306a7ab608fcc2a80e96dca1daef4655bdc78b5.1335246730.git.viresh.kumar@st.com> (raw)
In-Reply-To: <cover.1335246730.git.viresh.kumar@st.com>
Many drivers are shared between architectures that may or may not have HAVE_CLK
selected for them. To remove compilation errors for them we enclose clk_*()
calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif.
This patch removes the need of these CONFIG_HAVE_CLK statements, by introducing
dummy routines when HAVE_CLK is not selected by platforms. So, definition of
these routines will always be available. These calls will return error for
platforms that don't select HAVE_CLK.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
include/linux/clk.h | 168 +++++++++++++++++++++++++++++++++------------------
1 files changed, 109 insertions(+), 59 deletions(-)
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 70cf722..3266b0c 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -84,6 +84,43 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
#endif /* !CONFIG_COMMON_CLK */
/**
+ * clk_prepare - prepare a clock source
+ * @clk: clock source
+ *
+ * This prepares the clock source for use.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+int clk_prepare(struct clk *clk);
+#else
+static inline int clk_prepare(struct clk *clk)
+{
+ might_sleep();
+ return 0;
+}
+#endif
+
+/**
+ * clk_unprepare - undo preparation of a clock source
+ * @clk: clock source
+ *
+ * This undoes a previously prepared clock. The caller must balance
+ * the number of prepare and unprepare calls.
+ *
+ * Must not be called from within atomic context.
+ */
+#ifdef CONFIG_HAVE_CLK_PREPARE
+void clk_unprepare(struct clk *clk);
+#else
+static inline void clk_unprepare(struct clk *clk)
+{
+ might_sleep();
+}
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+/**
* clk_get - lookup and obtain a reference to a clock producer.
* @dev: device for clock "consumer"
* @id: clock comsumer ID
@@ -121,24 +158,6 @@ struct clk *clk_get(struct device *dev, const char *id);
struct clk *devm_clk_get(struct device *dev, const char *id);
/**
- * clk_prepare - prepare a clock source
- * @clk: clock source
- *
- * This prepares the clock source for use.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-int clk_prepare(struct clk *clk);
-#else
-static inline int clk_prepare(struct clk *clk)
-{
- might_sleep();
- return 0;
-}
-#endif
-
-/**
* clk_enable - inform the system when the clock source should be running.
* @clk: clock source
*
@@ -166,47 +185,6 @@ int clk_enable(struct clk *clk);
*/
void clk_disable(struct clk *clk);
-
-/**
- * clk_unprepare - undo preparation of a clock source
- * @clk: clock source
- *
- * This undoes a previously prepared clock. The caller must balance
- * the number of prepare and unprepare calls.
- *
- * Must not be called from within atomic context.
- */
-#ifdef CONFIG_HAVE_CLK_PREPARE
-void clk_unprepare(struct clk *clk);
-#else
-static inline void clk_unprepare(struct clk *clk)
-{
- might_sleep();
-}
-#endif
-
-/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
-static inline int clk_prepare_enable(struct clk *clk)
-{
- int ret;
-
- ret = clk_prepare(clk);
- if (ret)
- return ret;
- ret = clk_enable(clk);
- if (ret)
- clk_unprepare(clk);
-
- return ret;
-}
-
-/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
-static inline void clk_disable_unprepare(struct clk *clk)
-{
- clk_disable(clk);
- clk_unprepare(clk);
-}
-
/**
* clk_get_rate - obtain the current clock rate (in Hz) for a clock source.
* This is only valid once the clock source has been enabled.
@@ -297,6 +275,78 @@ struct clk *clk_get_parent(struct clk *clk);
*/
struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+#else /* !CONFIG_HAVE_CLK */
+
+static inline struct clk *clk_get(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline struct clk *devm_clk_get(struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+static inline void clk_put(struct clk *clk) {}
+
+static inline void devm_clk_put(struct device *dev, struct clk *clk) {}
+
+static inline int clk_enable(struct clk *clk)
+{
+ return -ENODEV;
+}
+
+static inline void clk_disable(struct clk *clk) {}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+ return -ENODEV;
+}
+
+static inline int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return -ENODEV;
+}
+
+static inline long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return -ENODEV;
+}
+
+static inline int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ return -ENODEV;
+}
+
+static inline struct clk *clk_get_parent(struct clk *clk)
+{
+ return ERR_PTR(-ENODEV);
+}
+
+#endif
+
+/* clk_prepare_enable helps cases using clk_enable in non-atomic context. */
+static inline int clk_prepare_enable(struct clk *clk)
+{
+ int ret;
+
+ ret = clk_prepare(clk);
+ if (ret)
+ return ret;
+ ret = clk_enable(clk);
+ if (ret)
+ clk_unprepare(clk);
+
+ return ret;
+}
+
+/* clk_disable_unprepare helps cases using clk_disable in non-atomic context. */
+static inline void clk_disable_unprepare(struct clk *clk)
+{
+ clk_disable(clk);
+ clk_unprepare(clk);
+}
+
/**
* clk_add_alias - add a new clock alias
* @alias: name for clock alias
--
1.7.9
next prev parent reply other threads:[~2012-04-24 6:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-24 5:56 [PATCH V2 0/9] " Viresh Kumar
2012-04-24 5:56 ` Viresh Kumar [this message]
2012-04-24 5:56 ` [PATCH V2 2/9] clk: Remove redundant depends on from drivers/Kconfig Viresh Kumar
2012-04-24 5:56 ` [PATCH V2 3/9] ata/pata_arasan: Remove conditional compilation of clk code Viresh Kumar
2012-04-24 5:56 ` [PATCH V2 4/9] ata/sata_mv: " Viresh Kumar
2012-04-24 5:56 ` [PATCH V2 5/9] net/c_can: " Viresh Kumar
2012-04-24 5:56 ` [PATCH V2 6/9] net/stmmac: " Viresh Kumar
2012-04-24 6:16 ` Giuseppe CAVALLARO
2012-04-24 6:33 ` Giuseppe CAVALLARO
2012-04-24 6:42 ` Viresh Kumar
2012-04-24 8:24 ` Giuseppe CAVALLARO
2012-04-24 5:56 ` [PATCH V2 7/9] gadget/m66592: " Viresh Kumar
2012-04-24 5:56 ` [PATCH V2 8/9] gadget/r8a66597: " Viresh Kumar
2012-04-24 5:56 ` [PATCH V2 9/9] usb/host/r8a66597: " Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4306a7ab608fcc2a80e96dca1daef4655bdc78b5.1335246730.git.viresh.kumar@st.com \
--to=viresh.kumar@st.com \
--cc=akpm@linux-foundation.org \
--cc=jgarzik@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@linaro.org \
--cc=spear-devel@list.st.com \
--cc=sshtylyov@mvista.com \
--cc=viresh.linux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®