mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@st.com>
To: <akpm@linux-foundation.org>
Cc: <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <mturquette@linaro.org>,
	<sshtylyov@mvista.com>, <jgarzik@redhat.com>,
	<linux@arm.linux.org.uk>, <spear-devel@list.st.com>,
	<viresh.linux@gmail.com>, Viresh Kumar <viresh.kumar@st.com>,
	<linux-ide@vger.kernel.org>
Subject: [PATCH V2 3/9] ata/pata_arasan: Remove conditional compilation of clk code
Date: Tue, 24 Apr 2012 11:26:11 +0530	[thread overview]
Message-ID: <4f7845b5e01002f6a3446f9828d1b6e42e6daff4.1335246730.git.viresh.kumar@st.com> (raw)
In-Reply-To: <cover.1335246730.git.viresh.kumar@st.com>

With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h,
there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif
macros.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: linux-ide@vger.kernel.org
---
 drivers/ata/pata_arasan_cf.c |   39 ++++++++++++++++-----------------------
 1 files changed, 16 insertions(+), 23 deletions(-)

diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index fc2db2a..b370e35 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -184,10 +184,8 @@
 struct arasan_cf_dev {
 	/* pointer to ata_host structure */
 	struct ata_host *host;
-	/* clk structure, only if HAVE_CLK is defined */
-#ifdef CONFIG_HAVE_CLK
+	/* clk structure */
 	struct clk *clk;
-#endif
 
 	/* physical base address of controller */
 	dma_addr_t pbase;
@@ -312,13 +310,13 @@ static int cf_init(struct arasan_cf_dev *acdev)
 	unsigned long flags;
 	int ret = 0;
 
-#ifdef CONFIG_HAVE_CLK
-	ret = clk_enable(acdev->clk);
-	if (ret) {
-		dev_dbg(acdev->host->dev, "clock enable failed");
-		return ret;
+	if (!IS_ERR(acdev->clk)) {
+		ret = clk_enable(acdev->clk);
+		if (ret) {
+			dev_dbg(acdev->host->dev, "clock enable failed");
+			return ret;
+		}
 	}
-#endif
 
 	spin_lock_irqsave(&acdev->host->lock, flags);
 	/* configure CF interface clock */
@@ -344,9 +342,9 @@ static void cf_exit(struct arasan_cf_dev *acdev)
 	writel(readl(acdev->vbase + OP_MODE) & ~CFHOST_ENB,
 			acdev->vbase + OP_MODE);
 	spin_unlock_irqrestore(&acdev->host->lock, flags);
-#ifdef CONFIG_HAVE_CLK
-	clk_disable(acdev->clk);
-#endif
+
+	if (!IS_ERR(acdev->clk))
+		clk_disable(acdev->clk);
 }
 
 static void dma_callback(void *dev)
@@ -828,13 +826,9 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-#ifdef CONFIG_HAVE_CLK
 	acdev->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(acdev->clk)) {
+	if (IS_ERR(acdev->clk))
 		dev_warn(&pdev->dev, "Clock not found\n");
-		return PTR_ERR(acdev->clk);
-	}
-#endif
 
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
@@ -899,9 +893,8 @@ static int __devinit arasan_cf_probe(struct platform_device *pdev)
 			&arasan_cf_sht);
 
 free_clk:
-#ifdef CONFIG_HAVE_CLK
-	clk_put(acdev->clk);
-#endif
+	if (!IS_ERR(acdev->clk))
+		clk_put(acdev->clk);
 	return ret;
 }
 
@@ -912,9 +905,9 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev)
 
 	ata_host_detach(host);
 	cf_exit(acdev);
-#ifdef CONFIG_HAVE_CLK
-	clk_put(acdev->clk);
-#endif
+
+	if (!IS_ERR(acdev->clk))
+		clk_put(acdev->clk);
 
 	return 0;
 }
-- 
1.7.9


  parent reply	other threads:[~2012-04-24  6:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-04-24  5:56 [PATCH V2 0/9] clk: Add non CONFIG_HAVE_CLK routines Viresh Kumar
2012-04-24  5:56 ` [PATCH V2 1/9] " Viresh Kumar
2012-04-24  5:56 ` [PATCH V2 2/9] clk: Remove redundant depends on from drivers/Kconfig Viresh Kumar
2012-04-24  5:56 ` Viresh Kumar [this message]
2012-04-24  5:56 ` [PATCH V2 4/9] ata/sata_mv: Remove conditional compilation of clk code Viresh Kumar
2012-04-24  5:56 ` [PATCH V2 5/9] net/c_can: " Viresh Kumar
2012-04-24  5:56 ` [PATCH V2 6/9] net/stmmac: " Viresh Kumar
2012-04-24  6:16   ` Giuseppe CAVALLARO
2012-04-24  6:33     ` Giuseppe CAVALLARO
2012-04-24  6:42       ` Viresh Kumar
2012-04-24  8:24         ` Giuseppe CAVALLARO
2012-04-24  5:56 ` [PATCH V2 7/9] gadget/m66592: " Viresh Kumar
2012-04-24  5:56 ` [PATCH V2 8/9] gadget/r8a66597: " Viresh Kumar
2012-04-24  5:56 ` [PATCH V2 9/9] usb/host/r8a66597: " Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4f7845b5e01002f6a3446f9828d1b6e42e6daff4.1335246730.git.viresh.kumar@st.com \
    --to=viresh.kumar@st.com \
    --cc=akpm@linux-foundation.org \
    --cc=jgarzik@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mturquette@linaro.org \
    --cc=spear-devel@list.st.com \
    --cc=sshtylyov@mvista.com \
    --cc=viresh.linux@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®