From: Jay Lan <jlan@engr.sgi.com>
To: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Andrew Morton <akpm@osdl.org>,
balbir@in.ibm.com, greg@kroah.com, arjan@infradead.org,
hadi@cyberus.ca, ak@suse.de, linux-kernel@vger.kernel.org,
lse-tech@lists.sourceforge.net, erikj@sgi.com,
lserinol@gmail.com, guillaume.thouvenin@bull.net,
Dipankar Sarma <dipankar@in.ibm.com>,
Peter Chubb <peterc@gelato.unsw.edu.au>,
Jes Sorensen <jes@sgi.com>
Subject: Re: [Patch 0/8] per-task delay accounting
Date: Mon, 10 Apr 2006 10:15:06 -0700 [thread overview]
Message-ID: <443A929A.9040102@engr.sgi.com> (raw)
In-Reply-To: <442DED81.5060009@engr.sgi.com>
I made two feedback on 3/31 only to see them bounced
back over the weekend. :(
Here was my first feedback:
Shailabh Nagar wrote:
>>
>>Following Andrew's suggestion, here's my quick overview
>>of the various other accounting packages that have been
>>proposed on lse-tech with a focus on whether they can
>>utilize the netlink-based taskstats interface being proposed
>>by the delay accounting patches.
>>
>>Please note that unification of statistics *collection* is not
>>being discussed since that kind of merger can be done as these
>>patches get accepted, if at all, into the kernel. To try and
>>unify right away would hold every patch (esp. delay accounting !)
>>hostage to the problems in every other patch unnecessarily. As
>>long as the interface can be unified, the merger of the
>>collection bits can always happen without affecting user space.
>>
>>Stakeholders of each of these patches, on cc, are requested to
>>please correct any misunderstandings of what their patches do.
>
>To me, data collection and formation before sending down to
>userspace is very important part. What this taskstats netlink
>interface does is just to provide an interface to send "already
>formatted" data to userspace. In other words, it will replace
>"writing accounting records to an accounting file" step currently
>performed in BSD accouting and in CSA. If i understand it correctly,
>you have delayacct.c sitting on top of taskstats interface, and
>all other accounting methods should build their own layer on top
>of taskstats as well. For example, potentially BSD acct.c can replace
>fput() (and other statements dealing with acctounting file) with
>this interface. Same for CSA.
>
>This approach sounds right to me. Actually i am very glad that you
>made effort to provide a common ground here. Yet, this is only
>one step. I will apply your patchset on top of 2.6.16-mm to see
>what i get and give more feedback later.
And, here is the second one:
>
>
> This taskstats thing is much more complicated than what Guillaume
> used to have when he put up a prototype of doing ELSA over netlink.
> One confusing point is the struct taskstats. If it is to be used
> as the big data struct to contain all accounting data everybody
> needs (as Shailabh suggested on his CSA analysis section), then
> if at do_exit() every accounting methods are to be invoked to
> handle their netlink transmission (as currently implemented in
> delayed accounting), would it be a lot of overhead sending "grand
> data" too many times? Maybe each layer should just format data of
> their interest when invoked from do_exit, and then we do one call
> to genetlink to deliver formated struct taskstats data?
>
> Also, as you pointed out, CSA only retrieve data at end of task
> but delayed accounting needs to retrieve data during the process.
> So, i think we need more than one record types, not just the
> struct taskstats, so that the user space delayed accounting
> application can specify to get only delayed accounting record.
>
> Honestly, this taskstats.c layer looks more like something
> extracted from delayed accounting than a carefully designed
> common ground to me. Patch 8/8 is about documentation of delayed
> accounting than the common ground for various accounting methods.
> Can you please present us a documentation of design concept of
> such a common layer? That would help me. I guess i also need to
> catch up on genetlink to better understand taskstats code.
>
> Regards.
> - jay
>
Regards,
- jay
next prev parent reply other threads:[~2006-04-10 17:16 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-30 0:32 Shailabh Nagar
2006-03-30 0:35 ` [Patch 1/8] Setup Shailabh Nagar
2006-03-30 5:03 ` Andrew Morton
2006-03-30 15:07 ` Shailabh Nagar
2006-03-30 0:37 ` [Patch 2/8] Block I/O, swapin delays Shailabh Nagar
2006-03-30 5:03 ` Andrew Morton
2006-03-30 15:21 ` Shailabh Nagar
2006-03-30 0:42 ` [Patch 3/8] cpu delays Shailabh Nagar
2006-03-30 5:03 ` Andrew Morton
2006-03-30 16:01 ` Shailabh Nagar
2006-03-30 16:00 ` Dave Hansen
2006-03-30 16:03 ` Shailabh Nagar
2006-03-30 0:48 ` [Patch 4/8] generic netlink utility functions Shailabh Nagar
2006-03-30 0:52 ` [Patch 5/8] generic netlink interface for delay accounting Shailabh Nagar
2006-03-30 5:04 ` Andrew Morton
2006-03-30 6:10 ` Balbir Singh
2006-03-30 6:26 ` Andrew Morton
2006-03-30 6:29 ` Balbir Singh
2006-03-30 16:24 ` Shailabh Nagar
2006-03-30 0:54 ` [Patch 6/8] virtual cpu run time Shailabh Nagar
2006-03-30 5:04 ` Andrew Morton
2006-03-30 16:10 ` Shailabh Nagar
2006-03-30 0:56 ` [Patch 7/8] proc interface for block I/O delays Shailabh Nagar
2006-03-30 5:04 ` Andrew Morton
2006-03-30 0:59 ` [Patch 8/8] documentation, userspace utility Shailabh Nagar
2006-03-30 5:03 ` [Patch 0/8] per-task delay accounting Andrew Morton
2006-03-30 6:23 ` Balbir Singh
2006-03-30 6:47 ` Andrew Morton
2006-03-30 9:55 ` Paul Jackson
2006-03-30 13:23 ` [Lse-tech] " Dipankar Sarma
2006-03-30 17:23 ` Shailabh Nagar
2006-03-31 2:54 ` Peter Chubb
2006-03-31 5:27 ` Shailabh Nagar
2006-03-31 8:17 ` Peter Chubb
2006-03-31 16:03 ` Shailabh Nagar
[not found] ` <442CCF54.3000501@watson.ibm.com>
2006-03-31 7:31 ` Guillaume Thouvenin
2006-03-31 17:01 ` Shailabh Nagar
[not found] ` <442D8E39.8080606@engr.sgi.com>
[not found] ` <442DED81.5060009@engr.sgi.com>
2006-04-10 17:15 ` Jay Lan [this message]
2006-04-10 21:44 ` Shailabh Nagar
2006-04-10 22:33 ` [Lse-tech] " Jay Lan
2006-04-22 2:16 Shailabh Nagar
2006-04-25 15:07 ` Shailabh Nagar
2006-05-02 6:11 Balbir Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=443A929A.9040102@engr.sgi.com \
--to=jlan@engr.sgi.com \
--cc=ak@suse.de \
--cc=akpm@osdl.org \
--cc=arjan@infradead.org \
--cc=balbir@in.ibm.com \
--cc=dipankar@in.ibm.com \
--cc=erikj@sgi.com \
--cc=greg@kroah.com \
--cc=guillaume.thouvenin@bull.net \
--cc=hadi@cyberus.ca \
--cc=jes@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lse-tech@lists.sourceforge.net \
--cc=lserinol@gmail.com \
--cc=nagar@watson.ibm.com \
--cc=peterc@gelato.unsw.edu.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome