* [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again
@ 2026-11-17 11:13 Geert Uytterhoeven
2026-11-17 11:14 ` Arnd Bergmann
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Geert Uytterhoeven @ 2026-11-17 11:13 UTC (permalink / raw)
To: Arnd Bergmann, Philipp Zabel, Biju Das
Cc: linux-renesas-soc, linux-kernel, Geert Uytterhoeven
The power sequencing part is optional, and only needed on RZ/G3L
(SYSC_R9A08G046 selects POWER_SEQUENCING). Users of other members in
the RZ/G2L family may want to enable this driver built-in, while keeping
POWER_SEQUENCING disabled.
Fixes: eac3b292a26e2210 ("reset: rzg2l-usbphy-ctrl: add power sequencing dependency")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/reset/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 60fa039cdbb7f92b..673bca1e594e041f 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -280,7 +280,7 @@ config RESET_RASPBERRYPI
config RESET_RZG2L_USBPHY_CTRL
tristate "Renesas RZ/G2L USBPHY control driver"
depends on ARCH_RZG2L || COMPILE_TEST
- depends on POWER_SEQUENCING
+ depends on POWER_SEQUENCING || !POWER_SEQUENCING
select MFD_SYSCON
help
Support for USBPHY Control found on RZ/G2L family. It mainly
--
2.43.0
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again
2026-11-17 11:13 [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again Geert Uytterhoeven
@ 2026-11-17 11:14 ` Arnd Bergmann
2026-11-17 11:16 ` Philipp Zabel
2026-11-17 13:36 ` Philipp Zabel
2 siblings, 0 replies; 4+ messages in thread
From: Arnd Bergmann @ 2026-11-17 11:14 UTC (permalink / raw)
To: Geert Uytterhoeven, Philipp Zabel, Biju Das; +Cc: Linux-Renesas, linux-kernel
On Tue, Nov 17, 2026, at 12:13, Geert Uytterhoeven wrote:
> The power sequencing part is optional, and only needed on RZ/G3L
> (SYSC_R9A08G046 selects POWER_SEQUENCING). Users of other members in
> the RZ/G2L family may want to enable this driver built-in, while keeping
> POWER_SEQUENCING disabled.
>
> Fixes: eac3b292a26e2210 ("reset: rzg2l-usbphy-ctrl: add power
> sequencing dependency")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again
2026-11-17 11:13 [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again Geert Uytterhoeven
2026-11-17 11:14 ` Arnd Bergmann
@ 2026-11-17 11:16 ` Philipp Zabel
2026-11-17 13:36 ` Philipp Zabel
2 siblings, 0 replies; 4+ messages in thread
From: Philipp Zabel @ 2026-11-17 11:16 UTC (permalink / raw)
To: Geert Uytterhoeven, Arnd Bergmann, Biju Das
Cc: linux-renesas-soc, linux-kernel
On Di, 2026-11-17 at 12:13 +0100, Geert Uytterhoeven wrote:
> The power sequencing part is optional, and only needed on RZ/G3L
> (SYSC_R9A08G046 selects POWER_SEQUENCING). Users of other members in
> the RZ/G2L family may want to enable this driver built-in, while keeping
> POWER_SEQUENCING disabled.
>
> Fixes: eac3b292a26e2210 ("reset: rzg2l-usbphy-ctrl: add power sequencing dependency")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
regards
Philipp
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again
2026-11-17 11:13 [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again Geert Uytterhoeven
2026-11-17 11:14 ` Arnd Bergmann
2026-11-17 11:16 ` Philipp Zabel
@ 2026-11-17 13:36 ` Philipp Zabel
2 siblings, 0 replies; 4+ messages in thread
From: Philipp Zabel @ 2026-11-17 13:36 UTC (permalink / raw)
To: Geert Uytterhoeven, Arnd Bergmann, Biju Das
Cc: linux-renesas-soc, linux-kernel
On Di, 2026-11-17 at 12:13 +0100, Geert Uytterhoeven wrote:
> The power sequencing part is optional, and only needed on RZ/G3L
> (SYSC_R9A08G046 selects POWER_SEQUENCING). Users of other members in
> the RZ/G2L family may want to enable this driver built-in, while keeping
> POWER_SEQUENCING disabled.
>
> [...]
Applied to reset/next, thanks!
[1/1] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again
https://git.kernel.org/pub/scm/linux/kernel/git/pza/linux.git/commit/?id=76918eb855d0
regards
Philipp
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2026-11-17 13:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-11-17 11:13 [PATCH] reset: rzg2l-usbphy-ctrl: Permit disabling POWER_SEQUENCING again Geert Uytterhoeven
2026-11-17 11:14 ` Arnd Bergmann
2026-11-17 11:16 ` Philipp Zabel
2026-11-17 13:36 ` Philipp Zabel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®