Re: [PATCH net-next v5 03/14] net: ethernet: qualcomm: Add PPE driver for IPQ9574 SoC

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/26/25 4:31 PM, Luo Jie wrote:
> The PPE (Packet Process Engine) hardware block is available on Qualcomm
> IPQ SoC that support PPE architecture, such as IPQ9574.
> 
> The PPE in IPQ9574 includes six integrated ethernet MAC for 6 PPE ports,
> buffer management, queue management and scheduler functions. The MACs
> can connect with the external PHY or switch devices using the UNIPHY PCS
> block available in the SoC.
> 
> The PPE also includes various packet processing offload capabilities
> such as L3 routing and L2 bridging, VLAN and tunnel processing offload.
> It also includes Ethernet DMA function for transferring packets between
> ARM cores and PPE ethernet ports.
> 
> This patch adds the base source files and Makefiles for the PPE driver
> such as platform driver registration, clock initialization, and PPE
> reset routines.
> 
> Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
> ---

[...]

> +static int ppe_clock_init_and_reset(struct ppe_device *ppe_dev)
> +{
> +	unsigned long ppe_rate = ppe_dev->clk_rate;
> +	struct device *dev = ppe_dev->dev;
> +	struct reset_control *rstc;
> +	struct clk_bulk_data *clks;
> +	struct clk *clk;
> +	int ret, i;
> +
> +	for (i = 0; i < ppe_dev->num_icc_paths; i++) {
> +		ppe_dev->icc_paths[i].name = ppe_icc_data[i].name;
> +		ppe_dev->icc_paths[i].avg_bw = ppe_icc_data[i].avg_bw ? :
> +					       Bps_to_icc(ppe_rate);
> +		ppe_dev->icc_paths[i].peak_bw = ppe_icc_data[i].peak_bw ? :
> +						Bps_to_icc(ppe_rate);
> +	}

Can you not just set ppe_dev->icc_paths to ppe_icc_data?

Konrad