* 2.6.19-rc6-mm2: Network device naming starts at 1 instead of 0
@ 2006-12-05 22:07 Auke Kok
2006-12-05 22:08 ` Rafael J. Wysocki
0 siblings, 1 reply; 2+ messages in thread
From: Auke Kok @ 2006-12-05 22:07 UTC (permalink / raw)
To: Andrew Morton; +Cc: Linux Kernel Mailing List, NetDev
[resend]
Quick note: I loaded up 2.6.19-rc6-mm2 on a platform here and noticed that the onboard
e1000 NIC was enumerated to eth1 instead of eth0. on 2.6.18.5 and any other kernel I
used before, it was properly named eth0 after startup. eth0 itself is completely missing
(-ENODEV).
I'll try to see if I can point out the culprit, but perhaps this rings a bell to anyone.
Cheers,
Auke
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: 2.6.19-rc6-mm2: Network device naming starts at 1 instead of 0
2006-12-05 22:07 2.6.19-rc6-mm2: Network device naming starts at 1 instead of 0 Auke Kok
@ 2006-12-05 22:08 ` Rafael J. Wysocki
0 siblings, 0 replies; 2+ messages in thread
From: Rafael J. Wysocki @ 2006-12-05 22:08 UTC (permalink / raw)
To: Auke Kok; +Cc: Andrew Morton, Linux Kernel Mailing List, NetDev
On Tuesday, 5 December 2006 23:07, Auke Kok wrote:
> [resend]
>
> Quick note: I loaded up 2.6.19-rc6-mm2 on a platform here and noticed that the onboard
> e1000 NIC was enumerated to eth1 instead of eth0. on 2.6.18.5 and any other kernel I
> used before, it was properly named eth0 after startup. eth0 itself is completely missing
> (-ENODEV).
>
> I'll try to see if I can point out the culprit, but perhaps this rings a bell to anyone.
Please try to revert
gregkh-driver-driver-core-fixes-sysfs_create_link-retval-checks-in-core.c.patch
I had some similar problems that went away after I had reverted it.
Greetings,
Rafael
--
If you don't have the time to read,
you don't have the time or the tools to write.
- Stephen King
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-12-05 22:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-12-05 22:07 2.6.19-rc6-mm2: Network device naming starts at 1 instead of 0 Auke Kok
2006-12-05 22:08 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®