[GIT PULL 4/6] soc: sew SoC familes for 6.19

["Arnd Bergmann" <arnd@arndb.de>]

The following changes since commit dcb6fa37fd7bc9c3d2b066329b0d27dedf8becaa:

  Linux 6.18-rc3 (2025-10-26 15:59:49 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git tags/soc-newsoc-6.19

for you to fetch changes up to 9b418a3bfdd421c01002424958fbd86a1001c2c2:

  Merge tag 'anlogic-initial-6.19-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/newsoc (2025-11-21 21:29:57 +0100)

----------------------------------------------------------------
soc: sew SoC familes for 6.19

These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.

 - Black Sesame Technologies C1200 is an automotive SoC using
   Cortex-A78 CPU cores

 - Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
   platform using a single nuclei ux900 RISC-V core

 - Tenstorrent Blackhole is a Neural Processing Unit using
   custom "Tensix" cores for computation offload managed by
   Linux running on SiFive X280 RISC-V cores.

Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree.

----------------------------------------------------------------
Albert Yang (6):
      dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
      dt-bindings: arm: add Black Sesame Technologies (bst) SoC
      arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
      arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
      arm64: defconfig: enable BST platform support
      MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support

Arnd Bergmann (3):
      Merge tag 'tenstorrent-dt-for-v6.19' of https://github.com/tenstorrent/linux into soc/newsoc
      Merge branch 'bst/newsoc' into soc/newsoc
      Merge tag 'anlogic-initial-6.19-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/newsoc

Conor Dooley (1):
      MAINTAINERS: Setup support for Anlogic tree

Drew Fustini (8):
      dt-bindings: vendor-prefixes: Add Tenstorrent AI ULC
      dt-bindings: riscv: Add Tenstorrent Blackhole compatible
      dt-bindings: riscv: cpus: Add SiFive X280 compatible
      dt-bindings: timers: Add Tenstorrent Blackhole compatible
      dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
      riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
      riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
      riscv: defconfig: Enable Tenstorrent SoCs

Junhui Liu (9):
      dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
      dt-bindings: riscv: Add Nuclei UX900 compatibles
      dt-bindings: riscv: Add Anlogic DR1V90
      dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
      dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
      riscv: Add Anlogic SoC famly Kconfig support
      riscv: dts: Add initial Anlogic DR1V90 SoC device tree
      riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
      riscv: defconfig: Enable Anlogic SoC

 Documentation/devicetree/bindings/arm/bst.yaml     |  31 ++++++
 .../interrupt-controller/sifive,plic-1.0.0.yaml    |   1 +
 .../devicetree/bindings/riscv/anlogic.yaml         |  27 ++++++
 Documentation/devicetree/bindings/riscv/cpus.yaml  |   2 +
 .../devicetree/bindings/riscv/tenstorrent.yaml     |  28 ++++++
 .../bindings/serial/snps-dw-apb-uart.yaml          |   1 +
 .../devicetree/bindings/timer/sifive,clint.yaml    |   1 +
 .../bindings/timer/thead,c900-aclint-mtimer.yaml   |  17 ++--
 .../devicetree/bindings/vendor-prefixes.yaml       |  10 ++
 MAINTAINERS                                        |  25 +++++
 arch/arm64/Kconfig.platforms                       |   8 ++
 arch/arm64/boot/dts/Makefile                       |   1 +
 arch/arm64/boot/dts/bst/Makefile                   |   2 +
 .../boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts    |  24 +++++
 arch/arm64/boot/dts/bst/bstc1200.dtsi              |  97 ++++++++++++++++++
 arch/arm64/configs/defconfig                       |   1 +
 arch/riscv/Kconfig.socs                            |  13 +++
 arch/riscv/boot/dts/Makefile                       |   2 +
 arch/riscv/boot/dts/anlogic/Makefile               |   2 +
 arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts |  28 ++++++
 arch/riscv/boot/dts/anlogic/dr1v90.dtsi            | 100 +++++++++++++++++++
 arch/riscv/boot/dts/tenstorrent/Makefile           |   2 +
 arch/riscv/boot/dts/tenstorrent/blackhole-card.dts |  14 +++
 arch/riscv/boot/dts/tenstorrent/blackhole.dtsi     | 108 +++++++++++++++++++++
 arch/riscv/configs/defconfig                       |   2 +
 25 files changed, 541 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/arm/bst.yaml
 create mode 100644 Documentation/devicetree/bindings/riscv/anlogic.yaml
 create mode 100644 Documentation/devicetree/bindings/riscv/tenstorrent.yaml
 create mode 100644 arch/arm64/boot/dts/bst/Makefile
 create mode 100644 arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts
 create mode 100644 arch/arm64/boot/dts/bst/bstc1200.dtsi
 create mode 100644 arch/riscv/boot/dts/anlogic/Makefile
 create mode 100644 arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts
 create mode 100644 arch/riscv/boot/dts/anlogic/dr1v90.dtsi
 create mode 100644 arch/riscv/boot/dts/tenstorrent/Makefile
 create mode 100644 arch/riscv/boot/dts/tenstorrent/blackhole-card.dts
 create mode 100644 arch/riscv/boot/dts/tenstorrent/blackhole.dtsi