* [GIT PULL] thermal for v6.5-rc1
@ 2023-06-26 15:33 Daniel Lezcano
2023-06-26 17:15 ` Rafael J. Wysocki
0 siblings, 1 reply; 2+ messages in thread
From: Daniel Lezcano @ 2023-06-26 15:33 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Konrad Dybcio, Matti Lehtimäki, Praveenkumar I,
Stefan Wahren, Thierry Reding, Wolfram Sang, Stephan Gerhold,
Ricardo Cañuelo, Christophe JAILLET, Peng Fan,
Alex Leibovich, Uwe Kleine-König, Daniel Lezcano,
Yangtao Li, Chen-Yu Tsai, Luca Weiss, Linux Kernel Mailing List,
Linux PM mailing list
Hi Rafael,
please consider the following changes since commit
0bb619f9227aa370330d2b309733d74750705053:
thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures
(2023-06-15 18:07:48 +0200)
are available in the Git repository at:
ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
tags/thermal-v6.5-rc1
for you to fetch changes up to 57c9eaa4de537e6f08819d9214de502cac5a989c:
thermal/drivers/qcom/temp-alarm: Use dev_err_probe (2023-06-26
12:10:22 +0200)
----------------------------------------------------------------
- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
Dybcio)
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
- Add DT bindings for QCom ipq9574 (Praveenkumar I)
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
- Allow selecting the bang-bang governor as default (Thierry Reding)
- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)
- Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)
- Prevent setting up undocumented registers, enable the only described
sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)
- Add DT bindings and support for the Armada AP807 (Alex Leibovich)
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)
----------------------------------------------------------------
Alex Leibovich (2):
dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
thermal/drivers/armada: Add support for AP807 thermal data
Chen-Yu Tsai (2):
thermal/drivers/mediatek/lvts_thermal: Register thermal zones as
hwmon sensors
thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
Christophe JAILLET (1):
thermal/drivers/sun8i: Fix some error handling paths in
sun8i_ths_probe()
Daniel Lezcano (1):
net/mlx5: Update the driver with the recent thermal changes
Konrad Dybcio (2):
dt-bindings: thermal: tsens: Add QCM2290
dt-bindings: thermal: tsens: Add compatible for SM6375
Luca Weiss (1):
thermal/drivers/qcom/temp-alarm: Use dev_err_probe
Matti Lehtimäki (2):
dt-bindings: thermal: tsens: Add compatible for MSM8226
thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
Pankit Garg (1):
thermal/drivers/qoriq: No need to program site adjustment register
Peng Fan (2):
thermal/drivers/qoriq: Only enable supported sensors
thermal/drivers/qoriq: Support version 2.1
Praveenkumar I (1):
dt-bindings: thermal: tsens: Add ipq9574 compatible
Ricardo Cañuelo (1):
Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid
resource leak in mtk_thermal_probe"
Stefan Wahren (1):
dt-bindings: thermal: convert bcm2835-thermal bindings to YAML
Stephan Gerhold (6):
thermal/drivers/qcom/tsens: Drop unused legacy structs
thermal/drivers/qcom/tsens-v0_1: Fix mdm9607 slope values
thermal/drivers/qcom/tsens-v0_1: Add mdm9607 correction offsets
dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
thermal/drivers/qcom/tsens-v0_1: Add MSM8909 data
Thierry Reding (1):
thermal: Allow selecting the bang-bang governor as default
Uwe Kleine-König (1):
thermal/drivers/stm32: Convert to platform remove callback
returning void
Wolfram Sang (3):
drivers/thermal/rcar_gen3_thermal: introduce 'info' structure
drivers/thermal/rcar_gen3_thermal: refactor reading fuses into
seprarate function
drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4
Yangtao Li (10):
thermal/hwmon: Add error information printing for
devm_thermal_add_hwmon_sysfs()
thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
thermal/drivers/amlogic: Remove redundant msg in
amlogic_thermal_probe()
thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe()
and imx_sc_thermal_probe()
drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
thermal/drivers/tegra: Remove redundant msg in
tegra_tsensor_register_channel()
thermal/drivers/qoriq: Remove redundant msg in
qoriq_tmu_register_tmu_zone()
thermal/drivers/ti-soc: Remove redundant msg in
ti_thermal_expose_sensor()
thermal/drivers/qcom: Remove redundant msg at probe time
thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in
lvts_ctrl_start()
.../devicetree/bindings/thermal/armada-thermal.txt | 1 +
.../bindings/thermal/brcm,bcm2835-thermal.txt | 41 ------
.../bindings/thermal/brcm,bcm2835-thermal.yaml | 48 +++++++
.../devicetree/bindings/thermal/qcom-tsens.yaml | 32 ++---
drivers/net/ethernet/mellanox/mlx5/core/thermal.c | 15 ++-
drivers/thermal/Kconfig | 8 ++
drivers/thermal/amlogic_thermal.c | 3 +-
drivers/thermal/armada_thermal.c | 32 ++++-
drivers/thermal/imx8mm_thermal.c | 3 +-
drivers/thermal/imx_sc_thermal.c | 3 +-
drivers/thermal/k3_bandgap.c | 3 +-
drivers/thermal/mediatek/auxadc_thermal.c | 14 +-
drivers/thermal/mediatek/lvts_thermal.c | 4 +
drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 4 +-
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 38 +++---
drivers/thermal/qcom/tsens-v0_1.c | 126
++++++++++++------
drivers/thermal/qcom/tsens-v1.c | 22 ----
drivers/thermal/qcom/tsens.c | 26 +++-
drivers/thermal/qcom/tsens.h | 6 +-
drivers/thermal/qoriq_thermal.c | 52 ++++----
drivers/thermal/rcar_gen3_thermal.c | 141
+++++++++++++++------
drivers/thermal/st/st_thermal.c | 4 +-
drivers/thermal/st/st_thermal.h | 2 +-
drivers/thermal/st/st_thermal_memmap.c | 6 +-
drivers/thermal/sun8i_thermal.c | 59 +++------
drivers/thermal/tegra/tegra30-tsensor.c | 3 +-
drivers/thermal/thermal-generic-adc.c | 4 +
drivers/thermal/thermal_core.h | 2 +
drivers/thermal/thermal_hwmon.c | 5 +-
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 3 +-
30 files changed, 415 insertions(+), 295 deletions(-)
delete mode 100644
Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
create mode 100644
Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [GIT PULL] thermal for v6.5-rc1
2023-06-26 15:33 [GIT PULL] thermal for v6.5-rc1 Daniel Lezcano
@ 2023-06-26 17:15 ` Rafael J. Wysocki
0 siblings, 0 replies; 2+ messages in thread
From: Rafael J. Wysocki @ 2023-06-26 17:15 UTC (permalink / raw)
To: Daniel Lezcano
Cc: Rafael J. Wysocki, Konrad Dybcio, Matti Lehtimäki,
Praveenkumar I, Stefan Wahren, Thierry Reding, Wolfram Sang,
Stephan Gerhold, Ricardo Cañuelo, Christophe JAILLET,
Peng Fan, Alex Leibovich, Uwe Kleine-König, Yangtao Li,
Chen-Yu Tsai, Luca Weiss, Linux Kernel Mailing List,
Linux PM mailing list
Hi Daniel,
On Mon, Jun 26, 2023 at 5:33 PM Daniel Lezcano
<daniel.lezcano@linaro.org> wrote:
>
> Hi Rafael,
>
> please consider the following changes since commit
> 0bb619f9227aa370330d2b309733d74750705053:
>
> thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures
> (2023-06-15 18:07:48 +0200)
>
> are available in the Git repository at:
>
>
> ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.5-rc1
>
> for you to fetch changes up to 57c9eaa4de537e6f08819d9214de502cac5a989c:
>
> thermal/drivers/qcom/temp-alarm: Use dev_err_probe (2023-06-26
> 12:10:22 +0200)
>
> ----------------------------------------------------------------
> - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
> Dybcio)
>
> - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
>
> - Add DT bindings for QCom ipq9574 (Praveenkumar I)
>
> - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
>
> - Allow selecting the bang-bang governor as default (Thierry Reding)
>
> - Refactor and prepare the code to set the scene for RCar Gen4
> (Wolfram Sang)
>
> - Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
> calibration for the MSM8909 platform (Stephan Gerhold)
>
> - Revert a patch introducing a wrong usage of devm_of_iomap() on the
> Mediatek platform (Ricardo Cañuelo)
>
> - Fix the clock vs reset ordering in order to conform to the
> documentation on the sun8i (Christophe JAILLET)
>
> - Prevent setting up undocumented registers, enable the only described
> sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)
>
> - Add DT bindings and support for the Armada AP807 (Alex Leibovich)
>
> - Update the mlx5 driver with the recent thermal changes (Daniel
> Lezcano)
>
> - Convert to platform remove callback returning void on STM32 (Uwe
> Kleine-König)
>
> - Add an error information printing for devm_thermal_add_hwmon_sysfs()
> and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
> Qoriq, Mediateka and QCom (Yangtao Li)
>
> - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
>
> - Use the dev_err_probe() function in the QCom tsens alarm driver
> (Luca Weiss)
>
> ----------------------------------------------------------------
> Alex Leibovich (2):
> dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
> thermal/drivers/armada: Add support for AP807 thermal data
>
> Chen-Yu Tsai (2):
> thermal/drivers/mediatek/lvts_thermal: Register thermal zones as
> hwmon sensors
> thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
>
> Christophe JAILLET (1):
> thermal/drivers/sun8i: Fix some error handling paths in
> sun8i_ths_probe()
>
> Daniel Lezcano (1):
> net/mlx5: Update the driver with the recent thermal changes
>
> Konrad Dybcio (2):
> dt-bindings: thermal: tsens: Add QCM2290
> dt-bindings: thermal: tsens: Add compatible for SM6375
>
> Luca Weiss (1):
> thermal/drivers/qcom/temp-alarm: Use dev_err_probe
>
> Matti Lehtimäki (2):
> dt-bindings: thermal: tsens: Add compatible for MSM8226
> thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
>
> Pankit Garg (1):
> thermal/drivers/qoriq: No need to program site adjustment register
>
> Peng Fan (2):
> thermal/drivers/qoriq: Only enable supported sensors
> thermal/drivers/qoriq: Support version 2.1
>
> Praveenkumar I (1):
> dt-bindings: thermal: tsens: Add ipq9574 compatible
>
> Ricardo Cañuelo (1):
> Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid
> resource leak in mtk_thermal_probe"
>
> Stefan Wahren (1):
> dt-bindings: thermal: convert bcm2835-thermal bindings to YAML
>
> Stephan Gerhold (6):
> thermal/drivers/qcom/tsens: Drop unused legacy structs
> thermal/drivers/qcom/tsens-v0_1: Fix mdm9607 slope values
> thermal/drivers/qcom/tsens-v0_1: Add mdm9607 correction offsets
> dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
> dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
> thermal/drivers/qcom/tsens-v0_1: Add MSM8909 data
>
> Thierry Reding (1):
> thermal: Allow selecting the bang-bang governor as default
>
> Uwe Kleine-König (1):
> thermal/drivers/stm32: Convert to platform remove callback
> returning void
>
> Wolfram Sang (3):
> drivers/thermal/rcar_gen3_thermal: introduce 'info' structure
> drivers/thermal/rcar_gen3_thermal: refactor reading fuses into
> seprarate function
> drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4
>
> Yangtao Li (10):
> thermal/hwmon: Add error information printing for
> devm_thermal_add_hwmon_sysfs()
> thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
> thermal/drivers/amlogic: Remove redundant msg in
> amlogic_thermal_probe()
> thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe()
> and imx_sc_thermal_probe()
> drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
> thermal/drivers/tegra: Remove redundant msg in
> tegra_tsensor_register_channel()
> thermal/drivers/qoriq: Remove redundant msg in
> qoriq_tmu_register_tmu_zone()
> thermal/drivers/ti-soc: Remove redundant msg in
> ti_thermal_expose_sensor()
> thermal/drivers/qcom: Remove redundant msg at probe time
> thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in
> lvts_ctrl_start()
Pulled and added to the thermal branch of linux-pm.git.
Thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-06-26 17:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-26 15:33 [GIT PULL] thermal for v6.5-rc1 Daniel Lezcano
2023-06-26 17:15 ` Rafael J. Wysocki
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®