* PROBLEM: fakephp hangs terminal in 2.6.22 (and 2.6.21), does not Hot Plug
@ 2007-11-02 21:16 john_flowers
2008-01-03 18:18 ` Ian Abbott
0 siblings, 1 reply; 3+ messages in thread
From: john_flowers @ 2007-11-02 21:16 UTC (permalink / raw)
To: linux-kernel
The "Fake" PCI Hot Plug module fakephp does not complete the slot shutdown and will hang a terminal.
I am attempting to use the fakephp module to shutdown and restart a PCI Express FPGA board when the FPGA is reloaded. Using 2.6.22 (Ubuntu 7.10) or 2.6.21 (Fedora Core 7) I cannot get this functionality to work. Sending a '1' to the power file causes no change or debug output in dmesg and sending a '0' causes the terminal to hang. Please CC me as I am not subscribed to the mailing list.
Keywords: linux kernel module PCI
Linux nsafm01 2.6.21-1.3194.fc7 #1 SMP Wed May 23 22:35:01 EDT 2007 i686 i686 i386 GNU/Linux
Gnu C 4.1.2
Gnu make 3.81
binutils 2.17.50.0.12-4
util-linux 2.13-pre7
mount 2.13-pre7
module-init-tools 3.3-pre11
e2fsprogs 1.39
pcmciautils 014
quota-tools 3.14.
PPP 2.4.4
isdn4k-utils 3.9
Linux C Library > libc.2.6
Dynamic linker (ldd) 2.6
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
oprofile 0.9.2
Sh-utils 6.9
udev 106
wireless-tools 28
Modules Loaded fakephp i915 drm autofs4 hidp rfcomm l2cap bluetooth sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq dm_multipath video sbs i2c_ec button dock battery ac ipv6 lp loop snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm sr_mod fw_ohci cdrom serio_raw snd_timer iTCO_wdt parport_pc snd iTCO_vendor_support fw_core ata_generic parport i2c_i801 i2c_core e1000 soundcore pcspkr snd_page_alloc sg dm_snapshot dm_zero dm_mirror dm_mod pata_marvell ahci libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd
How to reproduce:
modprobe fakephp debug=1
echo 8 > /proc/sysrq-trigger
echo -n 0 > /sys/bus/pci/slots ... & (wanted to get the command line back)
alt-sysrq-t
dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003e561000 (usable)
[ 0.000000] BIOS-e820: 000000003e561000 - 000000003e56e000 (reserved)
[ 0.000000] BIOS-e820: 000000003e56e000 - 000000003e61d000 (usable)
[ 0.000000] BIOS-e820: 000000003e61d000 - 000000003e6e9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e6e9000 - 000000003e6ed000 (usable)
[ 0.000000] BIOS-e820: 000000003e6ed000 - 000000003e6f2000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6f2000 - 000000003e6f3000 (usable)
[ 0.000000] BIOS-e820: 000000003e6f3000 - 000000003e6ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
[ 0.000000] BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 103MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe200
[ 0.000000] Entering add_active_range(0, 0, 255744) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 255744
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 255744
[ 0.000000] On node 0 totalpages: 255744
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 206 pages used for memmap
[ 0.000000] HighMem zone: 26162 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FE020 checksum 0
[ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL )
[ 0.000000] ACPI: RSDT 3E6FD038, 004C (r1 INTEL DG965RY 697 1000013)
[ 0.000000] ACPI: FACP 3E6FC000, 0074 (r1 INTEL DG965RY 697 MSFT 1000013)
[ 0.000000] ACPI: DSDT 3E6F7000, 40ED (r1 INTEL DG965RY 697 MSFT 1000013)
[ 0.000000] ACPI: FACS 3E6A0000, 0040
[ 0.000000] ACPI: APIC 3E6F6000, 0078 (r1 INTEL DG965RY 697 MSFT 1000013)
[ 0.000000] ACPI: WDDT 3E6F5000, 0040 (r1 INTEL DG965RY 697 MSFT 1000013)
[ 0.000000] ACPI: MCFG 3E6F4000, 003C (r1 INTEL DG965RY 697 MSFT 1000013)
[ 0.000000] ACPI: ASF! 3E6F3000, 00A6 (r32 INTEL DG965RY 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 3E6F1000, 01BC (r1 INTEL CpuPm 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 3E6F0000, 0175 (r1 INTEL Cpu0Ist 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 3E6EF000, 0175 (r1 INTEL Cpu1Ist 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 3E6EE000, 0175 (r1 INTEL Cpu2Ist 697 MSFT 1000013)
[ 0.000000] ACPI: SSDT 3E6ED000, 0175 (r1 INTEL Cpu3Ist 697 MSFT 1000013)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:c0f00000)
[ 0.000000] Built 1 zonelists. Total pages: 253746
[ 0.000000] Kernel command line: root=UUID=7b59a6d3-7a2f-43f6-9787-c8fddc2479c9 ro single
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2131.356 MHz processor.
[ 14.835837] Console: colour VGA+ 80x25
[ 14.838853] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.839129] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.861931] Memory: 1001228k/1022976k available (2015k kernel code, 20048k reserved, 916k data, 364k init, 104536k highmem)
[ 14.862010] virtual kernel memory layout:
[ 14.862011] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.862011] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.862012] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.862013] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.862014] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 14.862015] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 14.862016] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 14.862370] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.862478] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 14.942483] Calibrating delay using timer specific routine.. 4265.73 BogoMIPS (lpj=8531476)
[ 14.942585] Security Framework v1.0.0 initialized
[ 14.942631] SELinux: Disabled at boot.
[ 14.942682] Mount-cache hash table entries: 512
[ 14.942810] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 14.942816] monitor/mwait feature present.
[ 14.942860] using mwait in idle threads.
[ 14.942903] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 14.942965] CPU: L2 cache: 4096K
[ 14.943006] CPU: Physical Processor ID: 0
[ 14.943049] CPU: Processor Core ID: 0
[ 14.943090] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 14.943097] Compat vDSO mapped to ffffe000.
[ 14.943148] Checking 'hlt' instruction... OK.
[ 14.958595] SMP alternatives: switching to UP code
[ 14.958960] Early unpacking initramfs... done
[ 15.223928] ACPI: Core revision 20070126
[ 15.224002] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.226793] CPU0: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 15.226890] SMP alternatives: switching to SMP code
[ 15.226986] Booting processor 1/1 eip 3000
[ 15.237336] Initializing CPU#1
[ 15.314132] Calibrating delay using timer specific routine.. 4262.73 BogoMIPS (lpj=8525476)
[ 15.314137] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 15.314141] monitor/mwait feature present.
[ 15.314143] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.314145] CPU: L2 cache: 4096K
[ 15.314146] CPU: Physical Processor ID: 0
[ 15.314148] CPU: Processor Core ID: 1
[ 15.314149] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 15.314763] CPU1: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz stepping 06
[ 15.315169] Total of 2 processors activated (8528.47 BogoMIPS).
[ 15.315351] ENABLING IO-APIC IRQs
[ 15.315555] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.462076] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 15.482137] Brought up 2 CPUs
[ 15.592964] migration_cost=50
[ 15.593154] Booting paravirtualized kernel on bare hardware
[ 15.593249] Time: 21:43:57 Date: 09/31/107
[ 15.593305] NET: Registered protocol family 16
[ 15.593414] EISA bus registered
[ 15.593457] ACPI: bus type pci registered
[ 15.594942] PCI: Using configuration type 1
[ 15.594984] Setting up standard PCI resources
[ 15.601220] ACPI: EC: Look up EC in DSDT
[ 15.602776] ACPI: Interpreter enabled
[ 15.602819] ACPI: (supports S0 S3 S4 S5)
[ 15.602961] ACPI: Using IOAPIC for interrupt routing
[ 15.606673] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.606735] PCI: Probing PCI hardware (bus 00)
[ 15.607388] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 15.607437] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 15.608058] PCI: Transparent bridge - 0000:00:1e.0
[ 15.608161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.608439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 15.608644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 15.608728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 15.608811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 15.608893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 15.608975] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 15.612546] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 15.612846] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 15.613144] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 15.613443] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 15.613741] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 15.614066] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 15.614366] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 15.614666] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 15.614983] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.615035] pnp: PnP ACPI init
[ 15.615082] ACPI: bus type pnp registered
[ 15.617115] pnp: PnP ACPI: found 12 devices
[ 15.617159] ACPI: ACPI bus type pnp unregistered
[ 15.617204] PnPBIOS: Disabled by ACPI PNP
[ 15.617275] PCI: Using ACPI for IRQ routing
[ 15.617318] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.617455] NET: Registered protocol family 8
[ 15.617498] NET: Registered protocol family 20
[ 15.617579] pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
[ 15.617629] pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
[ 15.617678] pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 15.617727] pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 15.617780] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 15.617827] pnp: 00:06: ioport range 0x400-0x47f has been reserved
[ 15.617875] Time: tsc clocksource has been installed.
[ 15.617941] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 15.648197] PCI: Bridge: 0000:00:1c.0
[ 15.648238] IO window: disabled.
[ 15.648282] MEM window: disabled.
[ 15.648324] PREFETCH window: disabled.
[ 15.648369] PCI: Bridge: 0000:00:1c.1
[ 15.648411] IO window: 1000-1fff
[ 15.648455] MEM window: 50100000-501fffff
[ 15.648499] PREFETCH window: disabled.
[ 15.648543] PCI: Bridge: 0000:00:1c.2
[ 15.648584] IO window: disabled.
[ 15.648627] MEM window: disabled.
[ 15.648670] PREFETCH window: disabled.
[ 15.648714] PCI: Bridge: 0000:00:1c.3
[ 15.648755] IO window: disabled.
[ 15.648798] MEM window: disabled.
[ 15.648840] PREFETCH window: disabled.
[ 15.648884] PCI: Bridge: 0000:00:1c.4
[ 15.648926] IO window: disabled.
[ 15.648969] MEM window: disabled.
[ 15.649011] PREFETCH window: disabled.
[ 15.649056] PCI: Bridge: 0000:00:1e.0
[ 15.649097] IO window: disabled.
[ 15.649140] MEM window: 50000000-500fffff
[ 15.649184] PREFETCH window: disabled.
[ 15.649242] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 15.649328] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.649343] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 15.649428] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 15.649442] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 15.650146] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 15.650160] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 15.650245] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 15.650258] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16
[ 15.650343] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 15.650352] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.650359] NET: Registered protocol family 2
[ 15.690011] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.690106] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 15.690691] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.690909] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.690957] TCP reno registered
[ 15.702165] checking if image is initramfs... it is
[ 16.145786] Switched to high resolution mode on CPU 1
[ 16.149629] Switched to high resolution mode on CPU 0
[ 16.229027] Freeing initrd memory: 7333k freed
[ 16.229562] audit: initializing netlink socket (disabled)
[ 16.229621] audit(1193867037.136:1): initialized
[ 16.229740] highmem bounce pool size: 64 pages
[ 16.231293] VFS: Disk quotas dquot_6.5.1
[ 16.231369] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.231481] io scheduler noop registered
[ 16.231523] io scheduler anticipatory registered
[ 16.231567] io scheduler deadline registered
[ 16.231618] io scheduler cfq registered (default)
[ 16.231672] Boot video device is 0000:00:02.0
[ 16.232027] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.232062] assign_interrupt_mode Found MSI capability
[ 16.232107] Allocate Port Service[0000:00:1c.0:pcie00]
[ 16.232135] Allocate Port Service[0000:00:1c.0:pcie02]
[ 16.232200] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.232234] assign_interrupt_mode Found MSI capability
[ 16.232279] Allocate Port Service[0000:00:1c.1:pcie00]
[ 16.232304] Allocate Port Service[0000:00:1c.1:pcie02]
[ 16.232367] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.232400] assign_interrupt_mode Found MSI capability
[ 16.232446] Allocate Port Service[0000:00:1c.2:pcie00]
[ 16.232471] Allocate Port Service[0000:00:1c.2:pcie02]
[ 16.232535] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 16.232568] assign_interrupt_mode Found MSI capability
[ 16.232613] Allocate Port Service[0000:00:1c.3:pcie00]
[ 16.232638] Allocate Port Service[0000:00:1c.3:pcie02]
[ 16.232701] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 16.232734] assign_interrupt_mode Found MSI capability
[ 16.232779] Allocate Port Service[0000:00:1c.4:pcie00]
[ 16.232805] Allocate Port Service[0000:00:1c.4:pcie02]
[ 16.232921] isapnp: Scanning for PnP cards...
[ 16.585494] isapnp: No Plug & Play device found
[ 16.601613] Real Time Clock Driver v1.12ac
[ 16.601736] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.601882] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.602420] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.602970] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 16.603132] input: Macintosh mouse button emulation as /class/input/input0
[ 16.603244] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 16.606161] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 16.606208] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 16.606333] mice: PS/2 mouse device common for all mice
[ 16.606459] EISA: Probing bus 0 at eisa.0
[ 16.606505] Cannot allocate resource for EISA slot 1
[ 16.606549] Cannot allocate resource for EISA slot 2
[ 16.606611] EISA: Detected 0 cards.
[ 16.606711] TCP cubic registered
[ 16.606761] NET: Registered protocol family 1
[ 16.606818] Using IPI No-Shortcut mode
[ 16.606994] Magic number: 11:268:754
[ 16.607226] Freeing unused kernel memory: 364k freed
[ 16.636900] input: AT Translated Set 2 keyboard as /class/input/input1
[ 16.757231] AppArmor: AppArmor initialized<5>audit(1193867037.636:2): type=1505 info="AppArmor initialized" pid=1211
[ 16.763188] fuse init (API version 7.8)
[ 16.767265] Failure registering capabilities with primary security module.
[ 16.799788] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 16.799931] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 16.800020] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 16.800132] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 17.111050] usbcore: registered new interface driver usbfs
[ 17.111117] usbcore: registered new interface driver hub
[ 17.111176] usbcore: registered new device driver usb
[ 17.111765] USB Universal Host Controller Interface driver v3.0
[ 17.111855] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 17.111944] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 17.111947] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 17.112084] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 17.112171] uhci_hcd 0000:00:1a.0: irq 17, io base 0x000020a0
[ 17.112290] usb usb1: configuration #1 chosen from 1 choice
[ 17.112356] hub 1-0:1.0: USB hub found
[ 17.112419] hub 1-0:1.0: 2 ports detected
[ 17.113638] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 17.113687] Copyright (c) 1999-2006 Intel Corporation.
[ 17.155125] SCSI subsystem initialized
[ 17.158856] libata version 2.21 loaded.
[ 17.216573] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 17.216667] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 17.216670] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 17.216817] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 17.216904] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00002080
[ 17.217187] usb usb2: configuration #1 chosen from 1 choice
[ 17.217336] hub 2-0:1.0: USB hub found
[ 17.217380] hub 2-0:1.0: 2 ports detected
[ 17.320319] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 17.320414] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 17.320418] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 17.320489] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 17.320575] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002060
[ 17.320689] usb usb3: configuration #1 chosen from 1 choice
[ 17.320752] hub 3-0:1.0: USB hub found
[ 17.320797] hub 3-0:1.0: 2 ports detected
[ 17.424193] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 17.424286] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 17.424289] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 17.424360] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 17.424446] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
[ 17.424562] usb usb4: configuration #1 chosen from 1 choice
[ 17.424627] hub 4-0:1.0: USB hub found
[ 17.424672] hub 4-0:1.0: 2 ports detected
[ 17.528087] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 17.528180] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 17.528183] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 17.528253] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 17.528338] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
[ 17.528452] usb usb5: configuration #1 chosen from 1 choice
[ 17.528518] hub 5-0:1.0: USB hub found
[ 17.528562] hub 5-0:1.0: 2 ports detected
[ 17.632086] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 22
[ 17.632188] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 17.660571] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:a9:df:5c
[ 17.749723] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 17.749814] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 17.749904] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 17.749907] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 17.749972] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 17.750058] ehci_hcd 0000:00:1a.7: debug port 1
[ 17.750105] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 17.750110] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x50325400
[ 17.754027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 17.754152] usb usb6: configuration #1 chosen from 1 choice
[ 17.754217] hub 6-0:1.0: USB hub found
[ 17.754263] hub 6-0:1.0: 4 ports detected
[ 17.855793] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[ 17.855886] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 17.855890] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 17.855963] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 17.856048] ehci_hcd 0000:00:1d.7: debug port 1
[ 17.856095] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 17.856099] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x50325000
[ 17.860030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 17.860148] usb usb7: configuration #1 chosen from 1 choice
[ 17.860212] hub 7-0:1.0: USB hub found
[ 17.860257] hub 7-0:1.0: 6 ports detected
[ 17.963688] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 18.013492] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[50004000-500047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 18.014802] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 18.014907] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 18.014954] scsi0 : pata_marvell
[ 18.015026] scsi1 : pata_marvell
[ 18.015086] ata1: PATA max UDMA/100 cmd 0x00011018 ctl 0x00011026 bmdma 0x00011000 irq 16
[ 18.015155] ata2: DUMMY
[ 18.015209] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
[ 18.351548] ata1.00: ATAPI: ATAPI DVD D DH16D2P, HP53, max UDMA/33
[ 18.539363] ata1.00: configured for UDMA/33
[ 18.540710] scsi 0:0:0:0: CD-ROM ATAPI DVD D DH16D2P HP53 PQ: 0 ANSI: 5
[ 18.541081] ata_piix 0000:00:1f.2: version 2.11
[ 18.541086] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 18.541237] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 18.541339] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 18.541359] scsi2 : ata_piix
[ 18.541507] scsi3 : ata_piix
[ 18.541702] ata3: SATA max UDMA/133 cmd 0x00012438 ctl 0x00012456 bmdma 0x00012410 irq 19
[ 18.541769] ata4: SATA max UDMA/133 cmd 0x00012430 ctl 0x00012452 bmdma 0x00012418 irq 19
[ 18.552846] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 18.552897] Uniform CD-ROM driver Revision: 3.20
[ 18.553089] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 18.555905] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 18.744293] ata3.00: ATA-7: ST380815AS, 3.AAD, max UDMA/133
[ 18.744345] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 18.810856] ata3.00: configured for UDMA/133
[ 18.977245] scsi 2:0:0:0: Direct-Access ATA ST380815AS 3.AA PQ: 0 ANSI: 5
[ 18.977350] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 18.977412] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 18.977561] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
[ 18.977663] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 18.977907] scsi4 : ata_piix
[ 18.978048] scsi5 : ata_piix
[ 18.978143] ata5: SATA max UDMA/133 cmd 0x00012428 ctl 0x0001244e bmdma 0x000120f0 irq 19
[ 18.978211] ata6: SATA max UDMA/133 cmd 0x00012420 ctl 0x0001244a bmdma 0x000120f8 irq 19
[ 19.282357] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001e88fa8]
[ 19.310378] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.310435] sd 2:0:0:0: [sda] Write Protect is off
[ 19.310480] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.310492] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.310592] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.310647] sd 2:0:0:0: [sda] Write Protect is off
[ 19.310691] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.310702] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.310771] sda: sda1 sda2 < sda5 >
[ 19.357488] sd 2:0:0:0: [sda] Attached SCSI disk
[ 19.549675] Attempting manual resume
[ 19.549718] swsusp: Resume From Partition 8:5
[ 19.549719] PM: Checking swsusp image.
[ 19.549849] PM: Resume from disk failed.
[ 19.588671] kjournald starting. Commit interval 5 seconds
[ 19.588676] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.576460] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 25.576551] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 26.234549] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 26.344622] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.497818] Linux agpgart interface v0.102 (c) Dave Jones
[ 26.591520] heci: Intel(R) AMT Management Interface - version 3.1.0.31
[ 26.591573] heci: Copyright (c) 2003 - 2007 Intel Corporation.
[ 26.591650] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 26.591744] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 26.592474] heci: link layer has been established.
[ 26.695144] heci: heci driver initialization successful.
[ 26.734139] iTCO_vendor_support: vendor-support=0
[ 26.734905] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 26.735019] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
[ 26.735120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 26.771482] NET: Registered protocol family 10
[ 26.771591] lo: Disabled Privacy Extensions
[ 26.776899] input: PC Speaker as /class/input/input2
[ 26.857119] agpgart: Detected an Intel 965G Chipset.
[ 26.858768] agpgart: Detected 7676K stolen memory.
[ 26.871061] agpgart: AGP aperture is 256M @ 0x40000000
[ 27.067329] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[ 27.067436] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 27.457993] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 27.460451] parport_pc 00:07: reported by Plug and Play ACPI
[ 27.460586] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 28.470573] lp0: using parport0 (interrupt-driven).
[ 28.528800] Adding 2955920k swap on /dev/sda5. Priority:-1 extents:1 across:2955920k
[ 28.770849] EXT3 FS on sda1, internal journal
[ 36.980850] eth0: no IPv6 routers present
[ 44.520564] fakephp: Fake PCI Hot Plug Controller Driver
[ 44.520567] fakephp: slot->name = 0000:00:00.0
[ 44.520578] fakephp: slot->name = 0000:00:02.0
[ 44.520585] fakephp: slot->name = 0000:00:03.0
[ 44.520593] fakephp: slot->name = 0000:00:19.0
[ 44.520601] fakephp: slot->name = 0000:00:1a.0
[ 44.520610] fakephp: slot->name = 0000:00:1a.1
[ 44.520617] fakephp: slot->name = 0000:00:1a.7
[ 44.520624] fakephp: slot->name = 0000:00:1b.0
[ 44.520631] fakephp: slot->name = 0000:00:1c.0
[ 44.520639] fakephp: slot->name = 0000:00:1c.1
[ 44.520646] fakephp: slot->name = 0000:00:1c.2
[ 44.520653] fakephp: slot->name = 0000:00:1c.3
[ 44.520660] fakephp: slot->name = 0000:00:1c.4
[ 44.520667] fakephp: slot->name = 0000:00:1d.0
[ 44.520674] fakephp: slot->name = 0000:00:1d.1
[ 44.520681] fakephp: slot->name = 0000:00:1d.2
[ 44.520688] fakephp: slot->name = 0000:00:1d.7
[ 44.520697] fakephp: slot->name = 0000:00:1e.0
[ 44.520705] fakephp: slot->name = 0000:00:1f.0
[ 44.520713] fakephp: slot->name = 0000:00:1f.2
[ 44.520720] fakephp: slot->name = 0000:00:1f.3
[ 44.520728] fakephp: slot->name = 0000:00:1f.5
[ 44.520737] fakephp: slot->name = 0000:02:00.0
[ 44.520744] fakephp: slot->name = 0000:06:03.0
[ 71.408043] SysRq : Changing Loglevel
[ 71.408109] Loglevel set to 8
[ 83.457370] fakephp: disable_slot - physical_slot = 0000:06:03.0
[ 83.457433] fakephp: No device in slot found
[ 83.457475] fakephp: No device in slot found
[ 83.457519] fakephp: No device in slot found
[ 83.457561] fakephp: No device in slot found
[ 83.457604] fakephp: No device in slot found
[ 83.457646] fakephp: No device in slot found
[ 83.457689] fakephp: No device in slot found
[ 83.457770] ieee1394: Node removed: ID:BUS[0-00:1023] GUID[0090270001e88fa8]
[ 83.457957] fakephp: removing slot 0000:06:03.0
[ 90.350950] SysRq : Show State
[ 90.351014]
[ 90.351015] free sibling
[ 90.351103] task PC stack pid father child younger older
[ 90.351156] init S C18F3B2C 0 1 0 (NOTLB)
[ 90.351268] c18f3b40 00000086 00000002 c18f3b2c c18f3b28 00000000 00000000 d79b51c7
[ 90.351466] 00000006 00000007 5da79330 0000000a 0000606f df882110 c17d9b00 00000000
[ 90.351697] 00001d14 00000000 c1bc38c0 fffef7e8 00000000 c17d9b4c 000000ff 00000000
[ 90.351927] Call Trace:
[ 90.352011] [<c02f2d88>] schedule_timeout+0x78/0xd0
[ 90.352077] [<f89173c1>] ata_qc_issue_prot+0x1d1/0x250 [libata]
[ 90.352153] [<c013bfea>] remove_wait_queue+0x1a/0x50
[ 90.352219] [<c013c08d>] add_wait_queue+0x1d/0x50
[ 90.352283] [<c01863ce>] pipe_poll+0x2e/0x90
[ 90.352346] [<c018db80>] do_select+0x3a0/0x490
[ 90.352413] [<c018e270>] __pollwait+0x0/0xf0
[ 90.352476] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.352541] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.352606] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.352672] [<c01effd1>] __make_request+0xc1/0x550
[ 90.352736] [<c0161652>] mempool_alloc+0x32/0x100
[ 90.352801] [<f89f20c3>] ext3_getblk+0xe3/0x270 [ext3]
[ 90.352872] [<c02e6372>] unix_find_other+0x72/0x190
[ 90.352937] [<c027f457>] __alloc_skb+0x57/0x120
[ 90.353001] [<c02e8768>] unix_write_space+0x18/0x80
[ 90.353065] [<c027b59b>] sock_alloc_send_skb+0x16b/0x1c0
[ 90.353130] [<c027d188>] sock_wfree+0x38/0x40
[ 90.353193] [<c02e675a>] unix_dgram_sendmsg+0x2ca/0x550
[ 90.353262] [<c0279022>] sock_sendmsg+0x112/0x130
[ 90.353329] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.353396] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.354080] [<c011fc6e>] kunmap_atomic+0x5e/0xa0
[ 90.354143] [<c011fc7a>] kunmap_atomic+0x6a/0xa0
[ 90.354207] [<c01fed0e>] copy_from_user+0x2e/0x70
[ 90.354272] [<c018de38>] core_sys_select+0x1c8/0x300
[ 90.354337] [<c02f3078>] mutex_lock+0x8/0x20
[ 90.354399] [<c01874d2>] pipe_read+0x2b2/0x400
[ 90.354463] [<c01fe05b>] vsnprintf+0x54b/0x630
[ 90.354529] [<c01923cb>] d_lookup+0x1b/0x40
[ 90.354591] [<c01b6cac>] proc_flush_task+0x4c/0x1f0
[ 90.354657] [<c013bfea>] remove_wait_queue+0x1a/0x50
[ 90.354722] [<c012afc7>] do_wait+0x737/0xb70
[ 90.354786] [<c018e3ab>] sys_select+0x4b/0x1b0
[ 90.354851] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 90.354918] =======================
[ 90.354960] kthreadd S 00001AF4 0 2 0 (L-TLB)
[ 90.355061] c18f5fd0 00000046 0000000a 00001af4 df882640 c17d9b00 00000000 c013bad0
[ 90.355259] 00000082 0000000a 5da18fea 0000000a 00000245 df882640 c17d9b00 00000000
[ 90.355489] 00000003 f70d9e74 dff51700 f70d9e70 00000292 c18f5fd0 c01205c0 00000000
[ 90.355720] Call Trace:
[ 90.355793] [<c013bad0>] kthread+0x0/0x70
[ 90.355857] [<c01205c0>] complete+0x40/0x60
[ 90.355919] [<c013bc45>] kthreadd+0x105/0x110
[ 90.355982] [<c013bb40>] kthreadd+0x0/0x110
[ 90.356044] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.356109] =======================
[ 90.356150] migration/0 S C18FBF8C 0 3 2 (L-TLB)
[ 90.356251] c18fbfa0 00000046 00000002 c18fbf8c c18fbf88 00000000 c18fbfa0 dbf798d4
[ 90.356449] 00000086 00000001 fa98c3bd 0000000c 000004fb df8830a0 c17d9b00 00000000
[ 90.356679] 00000003 f724df6c dfca5540 fffef7f4 00000000 c18fbfa0 000000ff 00000000
[ 90.356909] Call Trace:
[ 90.356986] [<c0124d14>] migration_thread+0x114/0x230
[ 90.357052] [<c0124c00>] migration_thread+0x0/0x230
[ 90.357115] [<c013bb12>] kthread+0x42/0x70
[ 90.357177] [<c013bad0>] kthread+0x0/0x70
[ 90.357239] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.357303] =======================
[ 90.357345] ksoftirqd/0 S C18FDFB0 0 4 2 (L-TLB)
[ 90.357446] c18fdfc4 00000046 00000002 c18fdfb0 c18fdfac 00000000 00000100 c046ef80
[ 90.357644] c01312ab 0000000a 54c6d1cb 00000012 000006c8 df8835d0 c17d9b00 00000000
[ 90.357874] 00000001 c03d2308 dfca5540 ffff1236 00000000 0000000a 000000ff 00000000
[ 90.358104] Call Trace:
[ 90.358177] [<c01312ab>] run_timer_softirq+0x15b/0x1c0
[ 90.358245] [<c012da90>] ksoftirqd+0x0/0xf0
[ 90.358307] [<c012db4b>] ksoftirqd+0xbb/0xf0
[ 90.358369] [<c013bb12>] kthread+0x42/0x70
[ 90.358430] [<c013bad0>] kthread+0x0/0x70
[ 90.358492] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.358557] =======================
[ 90.358598] watchdog/0 S 00000046 0 5 2 (L-TLB)
[ 90.358699] c18fffc8 00000046 c18fffd0 00000046 00000000 999c19e1 00000003 999c2e13
[ 90.358898] 00000003 00000001 999c3322 00000003 00000667 df883b00 c17d9b00 00000000
[ 90.359129] 00000222 00000000 c03ae180 00000000 00000078 c17d9b4c c010a65a c043cb4c
[ 90.359359] Call Trace:
[ 90.359435] [<c010a65a>] sched_clock+0x1a/0x70
[ 90.359498] [<c015a770>] watchdog+0x0/0x60
[ 90.359560] [<c015a7b8>] watchdog+0x48/0x60
[ 90.359622] [<c013bb12>] kthread+0x42/0x70
[ 90.359683] [<c013bad0>] kthread+0x0/0x70
[ 90.359745] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.359810] =======================
[ 90.359851] migration/1 S DF803F8C 0 6 2 (L-TLB)
[ 90.359952] df803fa0 00000046 00000002 df803f8c df803f88 00000000 df882c20 df882a60
[ 90.360150] 00000086 00000001 2beaed76 00000014 000004ec df800110 c17e3b00 00000001
[ 90.360380] 00000003 f789ff6c f7a31700 ffff2115 00000000 df803fa0 000000ff 00000000
[ 90.360610] Call Trace:
[ 90.360687] [<c0124c00>] migration_thread+0x0/0x230
[ 90.360751] [<c0124d14>] migration_thread+0x114/0x230
[ 90.360816] [<c01205c0>] complete+0x40/0x60
[ 90.360879] [<c0124c00>] migration_thread+0x0/0x230
[ 90.360942] [<c013bb12>] kthread+0x42/0x70
[ 90.361004] [<c013bad0>] kthread+0x0/0x70
[ 90.361066] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.361130] =======================
[ 90.361173] ksoftirqd/1 S DF805FB0 0 7 2 (L-TLB)
[ 90.361274] df805fc4 00000046 00000002 df805fb0 df805fac 00000000 c0139679 00000000
[ 90.361471] 007e4960 0000000a c3217ffd 00000012 000004fb df800640 c17e3b00 00000001
[ 90.361702] 00000001 c03d2328 dfca5e00 ffff1a55 00000000 0000000a 000000ff 00000000
[ 90.361932] Call Trace:
[ 90.362006] [<c0139679>] __rcu_process_callbacks+0x69/0x1d0
[ 90.362074] [<c012da90>] ksoftirqd+0x0/0xf0
[ 90.362136] [<c012db4b>] ksoftirqd+0xbb/0xf0
[ 90.362198] [<c013bb12>] kthread+0x42/0x70
[ 90.362260] [<c013bad0>] kthread+0x0/0x70
[ 90.362321] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.362386] =======================
[ 90.362427] watchdog/1 S 00000046 0 8 2 (L-TLB)
[ 90.362528] df809fc8 00000046 df809fd0 00000046 00000000 999c8721 00000003 fffffff7
[ 90.362726] ffffffff 00000001 9aceb49e 00000003 000005d8 df800b70 c17e3b00 00000001
[ 90.362956] c01225f9 df809fd0 c03ae180 ffff161d 00000078 ffffffff c010a65a c043cb4c
[ 90.363187] Call Trace:
[ 90.363262] [<c01225f9>] sched_setscheduler+0x1c9/0x250
[ 90.363328] [<c010a65a>] sched_clock+0x1a/0x70
[ 90.363391] [<c015a770>] watchdog+0x0/0x60
[ 90.363452] [<c015a7b8>] watchdog+0x48/0x60
[ 90.363514] [<c013bb12>] kthread+0x42/0x70
[ 90.363575] [<c013bad0>] kthread+0x0/0x70
[ 90.363637] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.363702] =======================
[ 90.363743] events/0 R running 0 9 2 (L-TLB)
[ 90.363844] events/1 S DF82BF98 0 10 2 (L-TLB)
[ 90.363945] df82bfac 00000046 00000002 df82bf98 df82bf94 00000000 c17e4ca0 c17e4cb0
[ 90.364143] dfffd740 0000000a a785ec19 00000014 00000821 df8015d0 c17e3b00 00000001
[ 90.364373] 000000fa dfffa480 f7a31700 ffff2123 00000000 0000033d 000000ff 00000000
[ 90.364603] Call Trace:
[ 90.364680] [<c0138d30>] worker_thread+0x0/0x100
[ 90.364743] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.364806] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.364871] [<c0138d30>] worker_thread+0x0/0x100
[ 90.364934] [<c013bb12>] kthread+0x42/0x70
[ 90.364995] [<c013bad0>] kthread+0x0/0x70
[ 90.365057] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.365122] =======================
[ 90.365164] khelper S 00000000 0 11 2 (L-TLB)
[ 90.365265] df82dfac 00000046 00000000 00000000 0000007b 0000007b 000000d8 ffffffff
[ 90.365462] c0105480 0000000a 4873e94c 00000006 000017d9 df801b00 c17d9b00 00000000
[ 90.365692] dfffa504 c0137d24 f784c8c0 f7817ec0 c013834a c17d9b4c 000000ff 00000246
[ 90.365923] Call Trace:
[ 90.365997] [<c0105480>] kernel_thread_helper+0x0/0x10
[ 90.366062] [<c0137d24>] __call_usermodehelper+0x24/0x70
[ 90.366127] [<c013834a>] run_workqueue+0x9a/0x110
[ 90.366190] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.366254] [<c0138d30>] worker_thread+0x0/0x100
[ 90.366317] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.366380] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.366446] [<c0138d30>] worker_thread+0x0/0x100
[ 90.366508] [<c013bb12>] kthread+0x42/0x70
[ 90.366570] [<c013bad0>] kthread+0x0/0x70
[ 90.366632] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.366697] =======================
[ 90.366738] kblockd/0 S DF863F98 0 31 2 (L-TLB)
[ 90.366839] df863fac 00000046 00000002 df863f98 df863f94 00000000 f88abd99 effadf05
[ 90.367037] 00000006 0000000a 69806103 00000008 0000bd7a df85a640 c17d9b00 00000000
[ 90.367267] c01ee881 c01f5fa1 dfca5380 fffeefb6 00000000 c17d9fc4 000000ff 00000000
[ 90.367497] Call Trace:
[ 90.367570] [<f88abd99>] scsi_request_fn+0x249/0x360 [scsi_mod]
[ 90.367647] [<c01ee881>] blk_start_queueing+0x11/0x20
[ 90.367710] [<c01f5fa1>] cfq_kick_queue+0x21/0x40
[ 90.367776] [<c0138d30>] worker_thread+0x0/0x100
[ 90.367839] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.367902] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.367968] [<c0138d30>] worker_thread+0x0/0x100
[ 90.368030] [<c013bb12>] kthread+0x42/0x70
[ 90.368092] [<c013bad0>] kthread+0x0/0x70
[ 90.368154] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.368219] =======================
[ 90.368260] kblockd/1 S DF865F98 0 32 2 (L-TLB)
[ 90.368361] df865fac 00000046 00000002 df865f98 df865f94 00000000 f88abd99 8756fa2f
[ 90.368559] 00000004 0000000a 00ba2ff4 00000006 0000b632 df85ab70 c17e3b00 00000001
[ 90.368789] c01ee881 c01f5fa1 f784c540 fffee597 00000000 c17e3fc4 000000ff 00000000
[ 90.369636] Call Trace:
[ 90.369709] [<f88abd99>] scsi_request_fn+0x249/0x360 [scsi_mod]
[ 90.369784] [<c01ee881>] blk_start_queueing+0x11/0x20
[ 90.369848] [<c01f5fa1>] cfq_kick_queue+0x21/0x40
[ 90.369912] [<c0138d30>] worker_thread+0x0/0x100
[ 90.369975] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.370038] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.370104] [<c0138d30>] worker_thread+0x0/0x100
[ 90.370167] [<c013bb12>] kthread+0x42/0x70
[ 90.370228] [<c013bad0>] kthread+0x0/0x70
[ 90.370290] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.370355] =======================
[ 90.370396] kacpid S DF8821C0 0 33 2 (L-TLB)
[ 90.370497] df869fac 00000046 df85af90 df8821c0 df882000 df85af90 00000000 a1db8d32
[ 90.370695] 00000003 00000001 a1db8f28 00000003 00000206 df85b0a0 c17d9b00 00000000
[ 90.370925] 000000d3 00000000 c03ae180 a1db8460 00000003 c17d9b4c df85b0a0 00000246
[ 90.371156] Call Trace:
[ 90.371232] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.371296] [<c0138d30>] worker_thread+0x0/0x100
[ 90.371359] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.371422] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.371488] [<c0138d30>] worker_thread+0x0/0x100
[ 90.371551] [<c013bb12>] kthread+0x42/0x70
[ 90.371612] [<c013bad0>] kthread+0x0/0x70
[ 90.371674] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.371739] =======================
[ 90.371781] kacpi_notify S DF86BF98 0 34 2 (L-TLB)
[ 90.371882] df86bfac 00000046 00000002 df86bf98 df86bf94 00000000 00000000 c18f9f9c
[ 90.372079] c02f1f8a 00000001 a1f3ed4f 00000003 000001f2 df85b5d0 c17e3b00 00000001
[ 90.372309] 00ce0145 00000082 c03ae180 fffedba4 00000000 00000348 000000ff 00000000
[ 90.372540] Call Trace:
[ 90.372613] [<c02f1f8a>] schedule+0x2ca/0x890
[ 90.372678] [<c0138d30>] worker_thread+0x0/0x100
[ 90.372741] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.372805] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.372870] [<c0138d30>] worker_thread+0x0/0x100
[ 90.372933] [<c013bb12>] kthread+0x42/0x70
[ 90.372994] [<c013bad0>] kthread+0x0/0x70
[ 90.373056] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.373121] =======================
[ 90.373162] kseriod S 00000000 0 145 2 (L-TLB)
[ 90.373264] df83bf98 00000046 00000000 00000000 00000003 00000286 dfa32a84 dfa32808
[ 90.373461] f8a4aee8 0000000a 64c35cc0 00000006 000010ef df8515d0 c17d9b00 00000000
[ 90.373691] f8a4aee8 c03c3820 f7f86700 c026050f c1033e40 00000287 c03d9a70 00000246
[ 90.373922] Call Trace:
[ 90.373997] [<c026050f>] bus_for_each_dev+0x4f/0x60
[ 90.374063] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.374127] [<c0269731>] serio_thread+0xd1/0x340
[ 90.374192] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.374257] [<c0269660>] serio_thread+0x0/0x340
[ 90.374320] [<c013bb12>] kthread+0x42/0x70
[ 90.374381] [<c013bad0>] kthread+0x0/0x70
[ 90.374444] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.374509] =======================
[ 90.374550] pdflush S DF870A60 0 172 2 (L-TLB)
[ 90.374651] df877fa8 00000046 c010320a df870a60 df8826f0 df882530 df870a60 00000000
[ 90.374849] c18f5fac 00000005 c75db9f0 00000003 000004d2 df870b70 c17d9b00 00000000
[ 90.375079] 00000003 df877f8c c03ae180 00000005 00000005 00000282 c0120900 00000000
[ 90.375310] Call Trace:
[ 90.375382] [<c010320a>] __switch_to+0xaa/0x1d0
[ 90.375448] [<c0120900>] set_user_nice+0xb0/0xf0
[ 90.375511] [<c0165000>] pdflush+0x0/0x200
[ 90.375573] [<c01650c5>] pdflush+0xc5/0x200
[ 90.375636] [<c013bb12>] kthread+0x42/0x70
[ 90.375697] [<c013bad0>] kthread+0x0/0x70
[ 90.375759] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.375824] =======================
[ 90.375865] pdflush S DF879F94 0 173 2 (L-TLB)
[ 90.375967] df879fa8 00000046 00000002 df879f94 df879f90 00000000 c013192f 00000000
[ 90.376165] 00000282 0000000a f3bde377 00000014 00000c46 df8710a0 c17d9b00 00000000
[ 90.376396] df879f9c 00000400 dfca5e00 ffff2123 00000000 00000000 000000ff 00000000
[ 90.376626] Call Trace:
[ 90.376699] [<c013192f>] __mod_timer+0x9f/0xb0
[ 90.376765] [<c0165000>] pdflush+0x0/0x200
[ 90.376827] [<c01650c5>] pdflush+0xc5/0x200
[ 90.376890] [<c013bb12>] kthread+0x42/0x70
[ 90.376952] [<c013bad0>] kthread+0x0/0x70
[ 90.377013] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.377078] =======================
[ 90.377119] kswapd0 S DF87BF34 0 174 2 (L-TLB)
[ 90.377220] df87bf48 00000046 00000002 df87bf34 df87bf30 00000000 ffffffff ffffffff
[ 90.377418] 00000002 00000005 c75e018d 00000003 00000641 df8715d0 c17d9b00 00000000
[ 90.377648] 00000003 00000046 c03ae180 fffedc3d 00000000 00000000 000000ff 00000000
[ 90.377878] Call Trace:
[ 90.377955] [<c0167f30>] kswapd+0x0/0x470
[ 90.378017] [<c016838c>] kswapd+0x45c/0x470
[ 90.378079] [<c02f1f8a>] schedule+0x2ca/0x890
[ 90.378144] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.378210] [<c01205c0>] complete+0x40/0x60
[ 90.378272] [<c0167f30>] kswapd+0x0/0x470
[ 90.378334] [<c013bb12>] kthread+0x42/0x70
[ 90.378395] [<c013bad0>] kthread+0x0/0x70
[ 90.378457] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.378522] =======================
[ 90.378563] aio/0 S C03AE500 0 225 2 (L-TLB)
[ 90.378664] c1941fac 00000046 dff3c530 c03ae500 c03ae340 dff3c530 00000000 c7759e7f
[ 90.378862] 00000003 00000005 c775960b 00000003 000003cf dff3c640 c17d9b00 00000000
[ 90.379092] 00000000 00000000 c03ae180 c77584be 00000003 c17d9b4c dff3c640 00000246
[ 90.379322] Call Trace:
[ 90.379398] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.379462] [<c0138d30>] worker_thread+0x0/0x100
[ 90.379525] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.379588] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.379653] [<c0138d30>] worker_thread+0x0/0x100
[ 90.379716] [<c013bb12>] kthread+0x42/0x70
[ 90.379778] [<c013bad0>] kthread+0x0/0x70
[ 90.379839] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.379905] =======================
[ 90.379946] aio/1 S C1943F98 0 226 2 (L-TLB)
[ 90.380047] c1943fac 00000046 00000002 c1943f98 c1943f94 00000000 00000000 c18f3e6c
[ 90.380245] c02f1f8a 00000005 c776c9ec 00000003 0000039a dff3cb70 c17e3b00 00000001
[ 90.380475] c1943fb8 00000082 c03ae180 fffedc41 00000000 0000032a 000000ff 00000000
[ 90.380705] Call Trace:
[ 90.380778] [<c02f1f8a>] schedule+0x2ca/0x890
[ 90.380844] [<c0138d30>] worker_thread+0x0/0x100
[ 90.380907] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.380970] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.381036] [<c0138d30>] worker_thread+0x0/0x100
[ 90.381098] [<c013bb12>] kthread+0x42/0x70
[ 90.381160] [<c013bad0>] kthread+0x0/0x70
[ 90.381222] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.381287] =======================
[ 90.381328] ksuspend_usbd S DFCE3F98 0 2080 2 (L-TLB)
[ 90.381429] dfce3fac 00000046 00000002 dfce3f98 dfce3f94 00000000 00000002 df945c00
[ 90.381627] df945f14 0000000a a5d071a6 00000004 000043d3 dfd94110 c17e3b00 00000001
[ 90.381857] df81ac80 df945f14 c1bc3380 fffedfe0 00000000 00000314 000000ff 00000000
[ 90.382087] Call Trace:
[ 90.382163] [<c0138d30>] worker_thread+0x0/0x100
[ 90.382226] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.382290] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.382355] [<c0138d30>] worker_thread+0x0/0x100
[ 90.382418] [<c013bb12>] kthread+0x42/0x70
[ 90.382479] [<c013bad0>] kthread+0x0/0x70
[ 90.382541] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.382606] =======================
[ 90.382647] khubd S F888A122 0 2081 2 (L-TLB)
[ 90.382748] dfd45f48 00000046 00000001 f888a122 fffeddf3 df945c00 df9a9200 00000000
[ 90.382946] df945c00 0000000a 2eb7ef80 00000004 00003745 c1b14640 c17e3b00 00000001
[ 90.383176] 00000000 00000006 dff51380 df945c00 df9a9200 00000000 ffffffed 00000246
[ 90.383406] Call Trace:
[ 90.383478] [<f888a122>] autosuspend_check+0x102/0x110 [usbcore]
[ 90.383558] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.383622] [<f8884b80>] hub_thread+0x3a0/0xc30 [usbcore]
[ 90.383695] [<c02f1f8a>] schedule+0x2ca/0x890
[ 90.383760] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.383826] [<c01205c0>] complete+0x40/0x60
[ 90.383888] [<f88847e0>] hub_thread+0x0/0xc30 [usbcore]
[ 90.383960] [<c013bb12>] kthread+0x42/0x70
[ 90.384628] [<c013bad0>] kthread+0x0/0x70
[ 90.384689] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.384754] =======================
[ 90.384796] ata/0 S C01FE677 0 2143 2 (L-TLB)
[ 90.384897] c1b0ffac 00000046 ffffffec c01fe677 00000060 00000283 000052a7 df884000
[ 90.385094] df884000 0000000a f609146e 00000005 00004da0 df850110 c17d9b00 00000000
[ 90.385325] 00000200 df81af80 f784b380 f8917500 c013834a c17d9b4c 000000ff 00000246
[ 90.385555] Call Trace:
[ 90.385627] [<c01fe677>] delay_tsc+0x27/0x50
[ 90.385692] [<f8917500>] ata_pio_task+0x0/0xf0 [libata]
[ 90.385763] [<c013834a>] run_workqueue+0x9a/0x110
[ 90.385828] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.385891] [<c0138d30>] worker_thread+0x0/0x100
[ 90.385954] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.386017] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.386083] [<c0138d30>] worker_thread+0x0/0x100
[ 90.386146] [<c013bb12>] kthread+0x42/0x70
[ 90.386207] [<c013bad0>] kthread+0x0/0x70
[ 90.386269] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.386334] =======================
[ 90.386375] ata/1 S DFF3DBB0 0 2144 2 (L-TLB)
[ 90.386476] dfdb9fac 00000046 df850530 dff3dbb0 dff3d9f0 df850530 00005298 df884000
[ 90.386674] df884000 0000000a 51ca9070 00000004 00005584 df850640 c17e3b00 00000001
[ 90.386904] df8500b8 df81a780 c1bc3a80 f8917500 c013834a 00000357 df850640 00000246
[ 90.387135] Call Trace:
[ 90.387210] [<f8917500>] ata_pio_task+0x0/0xf0 [libata]
[ 90.387281] [<c013834a>] run_workqueue+0x9a/0x110
[ 90.387345] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.387409] [<c0138d30>] worker_thread+0x0/0x100
[ 90.387472] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.387535] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.387601] [<c0138d30>] worker_thread+0x0/0x100
[ 90.387663] [<c013bb12>] kthread+0x42/0x70
[ 90.387725] [<c013bad0>] kthread+0x0/0x70
[ 90.387787] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.387852] =======================
[ 90.387893] ata_aux S DFCE61C0 0 2145 2 (L-TLB)
[ 90.387994] dfdbffac 00000046 dfdbc000 dfce61c0 dfce6000 dfdbc000 00000000 dfa4feac
[ 90.388192] c02f1f8a 00000001 febf6518 00000003 00000182 dfdbc110 c17d9b00 00000000
[ 90.388422] df851048 00000082 dfedcc40 febf5708 00000003 0000032a dfdbc110 00000246
[ 90.388653] Call Trace:
[ 90.388726] [<c02f1f8a>] schedule+0x2ca/0x890
[ 90.388791] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.388854] [<c0138d30>] worker_thread+0x0/0x100
[ 90.388917] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.388980] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.389046] [<c0138d30>] worker_thread+0x0/0x100
[ 90.389108] [<c013bb12>] kthread+0x42/0x70
[ 90.389170] [<c013bad0>] kthread+0x0/0x70
[ 90.389232] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.389296] =======================
[ 90.389338] khpsbpkt S 7D507D12 0 2211 2 (L-TLB)
[ 90.389439] dfc31fb8 00000046 c17da4c0 7d507d12 00000004 c02f1f8a dfc31fd0 00000046
[ 90.389637] 00000082 0000000a 7d50cceb 00000004 00000290 dfd890a0 c17d9b00 00000000
[ 90.389867] 00000003 c196de70 dffed700 c196de6c 00000282 dfc31fb8 c01205c0 00000000
[ 90.390097] Call Trace:
[ 90.390170] [<c02f1f8a>] schedule+0x2ca/0x890
[ 90.390235] [<c01205c0>] complete+0x40/0x60
[ 90.390297] [<f89319fb>] hpsbpkt_thread+0x11b/0x120 [ieee1394]
[ 90.390370] [<f89318e0>] hpsbpkt_thread+0x0/0x120 [ieee1394]
[ 90.390440] [<c013bb12>] kthread+0x42/0x70
[ 90.390502] [<c013bad0>] kthread+0x0/0x70
[ 90.390564] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.390629] =======================
[ 90.390671] scsi_eh_0 S DFE8BF34 0 2285 2 (L-TLB)
[ 90.390772] dfe8bf74 00000046 00000000 dfe8bf34 c0120688 00000000 00000000 00000003
[ 90.390969] 00000096 0000000a f607cbc3 00000005 0000292a dfcf8640 c17d9b00 00000000
[ 90.391199] c1b1b400 f88a510e f785a8c0 00000000 f88a5293 00000286 c1b1b400 dfd53c00
[ 90.391430] Call Trace:
[ 90.391502] [<c0120688>] __wake_up+0x38/0x50
[ 90.391566] [<f88a510e>] scsi_device_put+0x3e/0x40 [scsi_mod]
[ 90.391639] [<f88a5293>] __scsi_iterate_devices+0x53/0x70 [scsi_mod]
[ 90.391715] [<f88a9876>] scsi_error_handler+0x46/0x510 [scsi_mod]
[ 90.391791] [<c01205c0>] complete+0x40/0x60
[ 90.391853] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.391926] [<c013bb12>] kthread+0x42/0x70
[ 90.391988] [<c013bad0>] kthread+0x0/0x70
[ 90.392050] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.392115] =======================
[ 90.392156] scsi_eh_1 S DF9A1F34 0 2286 2 (L-TLB)
[ 90.392257] df9a1f74 00000046 00000000 df9a1f34 c0120688 00000000 00000000 00000003
[ 90.392456] 00000096 0000000a 510904be 00000004 0000090d dfcf95d0 c17d9b00 00000000
[ 90.392687] df945050 00000000 dfedcc40 00000246 f88a5288 00000246 00000293 df945000
[ 90.392917] Call Trace:
[ 90.392990] [<c0120688>] __wake_up+0x38/0x50
[ 90.393054] [<f88a5288>] __scsi_iterate_devices+0x48/0x70 [scsi_mod]
[ 90.393129] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.393202] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.393275] [<f88a9876>] scsi_error_handler+0x46/0x510 [scsi_mod]
[ 90.393350] [<c01205c0>] complete+0x40/0x60
[ 90.393413] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.393486] [<c013bb12>] kthread+0x42/0x70
[ 90.393547] [<c013bad0>] kthread+0x0/0x70
[ 90.393609] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.393674] =======================
[ 90.393715] scsi_eh_2 S DF9ABF34 0 2326 2 (L-TLB)
[ 90.393816] df9abf74 00000046 00000000 df9abf34 c0120688 00000000 00000000 00000003
[ 90.394014] 00000096 0000000a 6137a020 00000004 0000d13d dfc395d0 c17d9b00 00000000
[ 90.394244] c1b1b850 00000000 dfedc380 00000246 f88a5288 00000246 00000293 c1b1b800
[ 90.394474] Call Trace:
[ 90.394547] [<c0120688>] __wake_up+0x38/0x50
[ 90.394611] [<f88a5288>] __scsi_iterate_devices+0x48/0x70 [scsi_mod]
[ 90.394685] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.394759] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.394832] [<f88a9876>] scsi_error_handler+0x46/0x510 [scsi_mod]
[ 90.394907] [<c01205c0>] complete+0x40/0x60
[ 90.394969] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.395042] [<c013bb12>] kthread+0x42/0x70
[ 90.395104] [<c013bad0>] kthread+0x0/0x70
[ 90.395166] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.395231] =======================
[ 90.395272] scsi_eh_3 S DFCDDF34 0 2327 2 (L-TLB)
[ 90.395373] dfcddf74 00000046 00000000 dfcddf34 c0120688 00000000 00000000 00000003
[ 90.395571] 00000096 0000000a 6b20df2e 00000004 00a1a7a7 dfc38110 c17d9b00 00000000
[ 90.395802] c1b1bc50 00000000 dfedc380 00000246 f88a5288 00000246 00000293 c1b1bc00
[ 90.396032] Call Trace:
[ 90.396105] [<c0120688>] __wake_up+0x38/0x50
[ 90.396169] [<f88a5288>] __scsi_iterate_devices+0x48/0x70 [scsi_mod]
[ 90.396244] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.396317] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.396390] [<f88a9876>] scsi_error_handler+0x46/0x510 [scsi_mod]
[ 90.396466] [<c01205c0>] complete+0x40/0x60
[ 90.396528] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.396601] [<c013bb12>] kthread+0x42/0x70
[ 90.396662] [<c013bad0>] kthread+0x0/0x70
[ 90.396724] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.396789] =======================
[ 90.396830] scsi_eh_4 S DFE89F60 0 2385 2 (L-TLB)
[ 90.396931] dfe89f74 00000046 00000002 dfe89f60 dfe89f5c 00000000 00000000 00000003
[ 90.397128] 00000096 0000000a 74e543d6 00000004 00a17153 dfd895d0 c17e3b00 00000001
[ 90.397359] dfcfa450 00000000 c1bc3540 fffedf07 00000000 00000246 000000ff 00000000
[ 90.397589] Call Trace:
[ 90.397666] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.397739] [<f88a9876>] scsi_error_handler+0x46/0x510 [scsi_mod]
[ 90.397815] [<c01205c0>] complete+0x40/0x60
[ 90.397877] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.397950] [<c013bb12>] kthread+0x42/0x70
[ 90.398012] [<c013bad0>] kthread+0x0/0x70
[ 90.398074] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.398138] =======================
[ 90.398180] scsi_eh_5 S DF9A3F60 0 2386 2 (L-TLB)
[ 90.398281] df9a3f74 00000046 00000002 df9a3f60 df9a3f5c 00000000 00000000 00000003
[ 90.398478] 00000096 0000000a 7ea9c834 00000004 00a15f07 dfd88640 c17e3b00 00000001
[ 90.398708] dfcfa850 00000000 c1bc31c0 fffedf36 00000000 00000246 000000ff 00000000
[ 90.398939] Call Trace:
[ 90.399015] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.399089] [<f88a9876>] scsi_error_handler+0x46/0x510 [scsi_mod]
[ 90.399164] [<c01205c0>] complete+0x40/0x60
[ 90.399227] [<f88a9830>] scsi_error_handler+0x0/0x510 [scsi_mod]
[ 90.399299] [<c013bb12>] kthread+0x42/0x70
[ 90.399976] [<c013bad0>] kthread+0x0/0x70
[ 90.400037] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.400102] =======================
[ 90.400143] kjournald S DFD9DF88 0 2541 2 (L-TLB)
[ 90.400245] dfd9df9c 00000046 00000002 dfd9df88 dfd9df84 00000000 00000000 dfd87000
[ 90.400442] 00000000 0000000a 24449ddf 0000000e 000012b1 dfc40b70 c17d9b00 00000000
[ 90.400673] c1b0c850 00000000 dfca5540 ffff02f0 00000000 00000000 000000ff 00000000
[ 90.400903] Call Trace:
[ 90.400980] [<f89bbdc6>] kjournald+0x1d6/0x1f0 [jbd]
[ 90.401049] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.401115] [<f89bbbf0>] kjournald+0x0/0x1f0 [jbd]
[ 90.401181] [<c013bb12>] kthread+0x42/0x70
[ 90.401242] [<c013bad0>] kthread+0x0/0x70
[ 90.401304] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.401369] =======================
[ 90.401410] udevd S F7F5DB2C 0 2803 1 (NOTLB)
[ 90.401511] f7f5db40 00000082 00000002 f7f5db2c f7f5db28 00000000 00000000 d92a4dac
[ 90.401709] 00000006 00000001 6ea2f23f 00000013 0001b4bb df85a110 c17e3b00 00000001
[ 90.401939] 00040fce 00000000 c1bc3380 ffff1dfa 00000000 c17d9b4c 000000ff 00000000
[ 90.402169] Call Trace:
[ 90.402245] [<c02f2d88>] schedule_timeout+0x78/0xd0
[ 90.402310] [<c013bfea>] remove_wait_queue+0x1a/0x50
[ 90.402374] [<c013c08d>] add_wait_queue+0x1d/0x50
[ 90.402437] [<c01863ce>] pipe_poll+0x2e/0x90
[ 90.402500] [<c018db80>] do_select+0x3a0/0x490
[ 90.402566] [<c018e270>] __pollwait+0x0/0xf0
[ 90.402629] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.402694] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.402759] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.402823] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.402889] [<c02f5d99>] do_page_fault+0x389/0x690
[ 90.402953] [<c012dc04>] tasklet_action+0x54/0xc0
[ 90.403022] [<c0162e9f>] __pagevec_free+0x1f/0x30
[ 90.403085] [<c0165c75>] release_pages+0x145/0x180
[ 90.403151] [<c011fc6e>] kunmap_atomic+0x5e/0xa0
[ 90.403213] [<c011fc7a>] kunmap_atomic+0x6a/0xa0
[ 90.403276] [<c016ae72>] do_wp_page+0x282/0x530
[ 90.403339] [<c01943e2>] iget_locked+0x72/0x140
[ 90.403404] [<c016d38b>] __handle_mm_fault+0x7fb/0xb00
[ 90.403470] [<c0163571>] get_page_from_freelist+0x2c1/0x3a0
[ 90.403538] [<c02f5d99>] do_page_fault+0x389/0x690
[ 90.403601] [<c016369f>] __alloc_pages+0x4f/0x340
[ 90.403666] [<c0192329>] __d_lookup+0x89/0x110
[ 90.403729] [<c018de38>] core_sys_select+0x1c8/0x300
[ 90.403795] [<c0189a19>] __link_path_walk+0x269/0xe70
[ 90.403860] [<c017740f>] shmem_truncate_range+0x2f/0x830
[ 90.403926] [<c0196cc4>] mntput_no_expire+0x24/0xa0
[ 90.403990] [<c018a685>] link_path_walk+0x65/0xc0
[ 90.404054] [<c0192329>] __d_lookup+0x89/0x110
[ 90.404118] [<c018815e>] permission+0x10e/0x120
[ 90.404181] [<c0192c14>] shrink_dcache_parent+0x14/0xf0
[ 90.404246] [<c013bfea>] remove_wait_queue+0x1a/0x50
[ 90.404310] [<c012ae53>] do_wait+0x5c3/0xb70
[ 90.404372] [<c01928b7>] dput+0x87/0x100
[ 90.404434] [<c0196cc4>] mntput_no_expire+0x24/0xa0
[ 90.404500] [<c018e3ab>] sys_select+0x4b/0x1b0
[ 90.404563] [<c012b431>] sys_wait4+0x31/0x40
[ 90.404626] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 90.404693] =======================
[ 90.404734] kpsmoused S DF851150 0 3894 2 (L-TLB)
[ 90.404835] f7a17fac 00000046 f79a19f0 df851150 df850f90 f79a19f0 00000000 41b1f200
[ 90.405033] 00000006 00000001 41d4b42b 00000006 00000314 f79a1b00 c17e3b00 00000001
[ 90.405263] 000ead00 00000000 f7a681c0 41a3afd1 00000006 c17e3fc4 f79a1b00 00000246
[ 90.405493] Call Trace:
[ 90.405569] [<c013bf80>] prepare_to_wait+0x20/0x70
[ 90.405633] [<c0138d30>] worker_thread+0x0/0x100
[ 90.405695] [<c0138e07>] worker_thread+0xd7/0x100
[ 90.405759] [<c013bdd0>] autoremove_wake_function+0x0/0x50
[ 90.405824] [<c0138d30>] worker_thread+0x0/0x100
[ 90.405887] [<c013bb12>] kthread+0x42/0x70
[ 90.405948] [<c013bad0>] kthread+0x0/0x70
[ 90.406010] [<c0105487>] kernel_thread_helper+0x7/0x10
[ 90.406075] =======================
[ 90.406116] sh S F74C3F28 0 4655 1 (NOTLB)
[ 90.406217] f74c3f3c 00000082 00000002 f74c3f28 f74c3f24 00000000 00000000 fffa7000
[ 90.406414] 00000007 00000001 f1b910a3 00000006 0000249b f71a55d0 c17e3b00 00000001
[ 90.406645] 3d161065 dff3cf90 dfca5a80 fffee98c 00000000 c010320a 000000ff 00000000
[ 90.406875] Call Trace:
[ 90.406950] [<c010320a>] __switch_to+0xaa/0x1d0
[ 90.407014] [<c012aef6>] do_wait+0x666/0xb70
[ 90.407079] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.407145] [<c012b431>] sys_wait4+0x31/0x40
[ 90.407208] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 90.407273] [<c02f0000>] clip_ioctl+0x500/0x510
[ 90.407337] =======================
[ 90.407378] bash S F7AD7EA4 0 4657 4655 (NOTLB)
[ 90.407479] f7ad7eb8 00000086 00000002 f7ad7ea4 f7ad7ea0 00000000 c00bea5e 00000010
[ 90.407676] 00000000 00000009 2e26eff2 00000014 0001795c dff3d0a0 c17d9b00 00000000
[ 90.407907] dfca01ff c01323e9 dfca5e00 ffff2115 00000000 dfd8780c 000000ff 00000000
[ 90.408137] Call Trace:
[ 90.408212] [<c01323e9>] __dequeue_signal+0xd9/0x160
[ 90.408278] [<c02f2d88>] schedule_timeout+0x78/0xd0
[ 90.408342] [<c0216f6b>] vgacon_set_cursor_size+0x9b/0x140
[ 90.408407] [<c01286f7>] release_console_sem+0x1c7/0x1f0
[ 90.408472] [<c013c08d>] add_wait_queue+0x1d/0x50
[ 90.408535] [<c0247a3d>] read_chan+0x1dd/0x630
[ 90.408600] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.408665] [<c02446ad>] tty_read+0x8d/0xd0
[ 90.408727] [<c0247860>] read_chan+0x0/0x630
[ 90.408789] [<c0180dbc>] vfs_read+0xbc/0x160
[ 90.408851] [<c0244620>] tty_read+0x0/0xd0
[ 90.408913] [<c01812f1>] sys_read+0x41/0x70
[ 90.408976] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 90.409040] [<c02f0000>] clip_ioctl+0x500/0x510
[ 90.409104] =======================
[ 90.409145] bash D 00000046 0 4698 4657 (NOTLB)
[ 90.409246] f724de58 00000086 c0216f6b 00000046 c17ec000 c17ec000 0000000a 6e7a4da7
[ 90.409444] 00000013 00000008 6e7c0cb1 00000013 000392f8 f79a0640 c17e3b00 00000001
[ 90.409674] 0000bcbf 00000000 dfa0ee00 c024f410 0000792d c17e3fc4 c01282b3 00007960
[ 90.409905] Call Trace:
[ 90.409977] [<c0216f6b>] vgacon_set_cursor_size+0x9b/0x140
[ 90.410045] [<c024f410>] vt_console_print+0x0/0x2b0
[ 90.410109] [<c01282b3>] __call_console_drivers+0x53/0x60
[ 90.410175] [<c02f3d8c>] __down+0x8c/0xf4
[ 90.410236] [<c0122bc0>] default_wake_function+0x0/0x10
[ 90.410301] [<c02f3b37>] __down_failed+0x7/0x10
[ 90.410364] [<c01c294b>] sysfs_drop_dentry+0x13b/0x190
[ 90.410430] [<c01c2ac1>] sysfs_hash_and_remove+0xd1/0x130
[ 90.410496] [<f89749bd>] pci_hp_deregister+0x10d/0x1b0 [pci_hotplug]
[ 90.410567] [<f89c8017>] remove_slot+0x17/0x60 [fakephp]
[ 90.410633] [<f89c814b>] disable_slot+0xab/0x140 [fakephp]
[ 90.410699] [<f8974e03>] power_write_file+0xb3/0x110 [pci_hotplug]
[ 90.410768] [<f8974d50>] power_write_file+0x0/0x110 [pci_hotplug]
[ 90.410836] [<f8974059>] hotplug_slot_attr_store+0x29/0x40 [pci_hotplug]
[ 90.410905] [<c01c30ab>] sysfs_write_file+0xab/0x110
[ 90.410971] [<c0180c4e>] vfs_write+0xbe/0x170
[ 90.411033] [<c01c3000>] sysfs_write_file+0x0/0x110
[ 90.411098] [<c0181361>] sys_write+0x41/0x70
[ 90.411161] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
[ 90.411226] [<c02f0000>] clip_ioctl+0x500/0x510
[ 90.411290] =======================
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PROBLEM: fakephp hangs terminal in 2.6.22 (and 2.6.21), does not Hot Plug
2007-11-02 21:16 PROBLEM: fakephp hangs terminal in 2.6.22 (and 2.6.21), does not Hot Plug john_flowers
@ 2008-01-03 18:18 ` Ian Abbott
2008-01-08 13:40 ` Ian Abbott
0 siblings, 1 reply; 3+ messages in thread
From: Ian Abbott @ 2008-01-03 18:18 UTC (permalink / raw)
To: john_flowers; +Cc: linux-kernel
On 02/11/07 21:16, john_flowers@agilent.com wrote:
> The "Fake" PCI Hot Plug module fakephp does not complete the slot
> shutdown and will hang a terminal.
>
>
> I am attempting to use the fakephp module to shutdown and restart a
> PCI Express FPGA board when the FPGA is reloaded. Using 2.6.22
> (Ubuntu 7.10) or 2.6.21 (Fedora Core 7) I cannot get this
> functionality to work. Sending a '1' to the power file causes no
> change or debug output in dmesg and sending a '0' causes the terminal
> to hang. Please CC me as I am not subscribed to the mailing list.
I encountered the same problem today with a 2.6.24-rc6-git9 x86_64 SMP
kernel when testing the hotplug sections of a driver I wrote. The
terminal locks up when echoing a '0' to a PCI slot's "power" file. I
added a few dbg calls in the fs_remove_slot function in
pci_hotplug_core.c and it seems that the call to sysfs_remove_file to
remove the "power" file that is being written to does not return.
Perhaps the code is locking the same mutex twice in this situation?
As this messsage thread is a bit ancient now, I'll requote the important
bits of John's error report:
> Keywords: linux kernel module PCI
>
> Linux nsafm01 2.6.21-1.3194.fc7 #1 SMP Wed May 23 22:35:01 EDT 2007 i686 i686 i386 GNU/Linux
>
> Gnu C 4.1.2
> Gnu make 3.81
> binutils 2.17.50.0.12-4
> util-linux 2.13-pre7
> mount 2.13-pre7
> module-init-tools 3.3-pre11
> e2fsprogs 1.39
> pcmciautils 014
> quota-tools 3.14.
> PPP 2.4.4
> isdn4k-utils 3.9
> Linux C Library > libc.2.6
> Dynamic linker (ldd) 2.6
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> oprofile 0.9.2
> Sh-utils 6.9
> udev 106
> wireless-tools 28
> Modules Loaded fakephp i915 drm autofs4 hidp rfcomm l2cap bluetooth sunrpc nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables cpufreq_ondemand acpi_cpufreq dm_multipath video sbs i2c_ec button dock battery ac ipv6 lp loop snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm sr_mod fw_ohci cdrom serio_raw snd_timer iTCO_wdt parport_pc snd iTCO_vendor_support fw_core ata_generic parport i2c_i801 i2c_core e1000 soundcore pcspkr snd_page_alloc sg dm_snapshot dm_zero dm_mirror dm_mod pata_marvell ahci libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd
>
> How to reproduce:
>
> modprobe fakephp debug=1
> echo 8 > /proc/sysrq-trigger
> echo -n 0 > /sys/bus/pci/slots ... & (wanted to get the command line back)
> alt-sysrq-t
> dmesg
>
[snip]
> [ 90.409104] =======================
> [ 90.409145] bash D 00000046 0 4698 4657 (NOTLB)
> [ 90.409246] f724de58 00000086 c0216f6b 00000046 c17ec000 c17ec000 0000000a 6e7a4da7
> [ 90.409444] 00000013 00000008 6e7c0cb1 00000013 000392f8 f79a0640 c17e3b00 00000001
> [ 90.409674] 0000bcbf 00000000 dfa0ee00 c024f410 0000792d c17e3fc4 c01282b3 00007960
> [ 90.409905] Call Trace:
> [ 90.409977] [<c0216f6b>] vgacon_set_cursor_size+0x9b/0x140
> [ 90.410045] [<c024f410>] vt_console_print+0x0/0x2b0
> [ 90.410109] [<c01282b3>] __call_console_drivers+0x53/0x60
> [ 90.410175] [<c02f3d8c>] __down+0x8c/0xf4
> [ 90.410236] [<c0122bc0>] default_wake_function+0x0/0x10
> [ 90.410301] [<c02f3b37>] __down_failed+0x7/0x10
> [ 90.410364] [<c01c294b>] sysfs_drop_dentry+0x13b/0x190
> [ 90.410430] [<c01c2ac1>] sysfs_hash_and_remove+0xd1/0x130
> [ 90.410496] [<f89749bd>] pci_hp_deregister+0x10d/0x1b0 [pci_hotplug]
> [ 90.410567] [<f89c8017>] remove_slot+0x17/0x60 [fakephp]
> [ 90.410633] [<f89c814b>] disable_slot+0xab/0x140 [fakephp]
> [ 90.410699] [<f8974e03>] power_write_file+0xb3/0x110 [pci_hotplug]
> [ 90.410768] [<f8974d50>] power_write_file+0x0/0x110 [pci_hotplug]
> [ 90.410836] [<f8974059>] hotplug_slot_attr_store+0x29/0x40 [pci_hotplug]
> [ 90.410905] [<c01c30ab>] sysfs_write_file+0xab/0x110
> [ 90.410971] [<c0180c4e>] vfs_write+0xbe/0x170
> [ 90.411033] [<c01c3000>] sysfs_write_file+0x0/0x110
> [ 90.411098] [<c0181361>] sys_write+0x41/0x70
> [ 90.411161] [<c01041d2>] sysenter_past_esp+0x6b/0xa9
> [ 90.411226] [<c02f0000>] clip_ioctl+0x500/0x510
> [ 90.411290] =======================
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@mev.co.uk> )=-
-=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: PROBLEM: fakephp hangs terminal in 2.6.22 (and 2.6.21), does not Hot Plug
2008-01-03 18:18 ` Ian Abbott
@ 2008-01-08 13:40 ` Ian Abbott
0 siblings, 0 replies; 3+ messages in thread
From: Ian Abbott @ 2008-01-08 13:40 UTC (permalink / raw)
To: linux-kernel; +Cc: john_flowers
On 03/01/08 18:18, Ian Abbott wrote:
> On 02/11/07 21:16, john_flowers@agilent.com wrote:
>> The "Fake" PCI Hot Plug module fakephp does not complete the slot
>> shutdown and will hang a terminal.
>>
>>
>> I am attempting to use the fakephp module to shutdown and restart a
>> PCI Express FPGA board when the FPGA is reloaded. Using 2.6.22
>> (Ubuntu 7.10) or 2.6.21 (Fedora Core 7) I cannot get this
>> functionality to work. Sending a '1' to the power file causes no
>> change or debug output in dmesg and sending a '0' causes the terminal
>> to hang. Please CC me as I am not subscribed to the mailing list.
>
> I encountered the same problem today with a 2.6.24-rc6-git9 x86_64 SMP
> kernel when testing the hotplug sections of a driver I wrote. The
> terminal locks up when echoing a '0' to a PCI slot's "power" file. I
> added a few dbg calls in the fs_remove_slot function in
> pci_hotplug_core.c and it seems that the call to sysfs_remove_file to
> remove the "power" file that is being written to does not return.
> Perhaps the code is locking the same mutex twice in this situation?
Just a bit more maybe-helpful info....
1. The problem appeared in 2.6.21. 2.6.20 works.
2. When the process writing 0 to the 'power' file is hung, running 'ls
/sys/bus/pci/slots/<slotname>' shows an empty directory, i.e. the unlink
of the 'power' file is at least partially complete but the <slotname>
directory remains.
--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@mev.co.uk> )=-
-=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-01-08 13:41 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-11-02 21:16 PROBLEM: fakephp hangs terminal in 2.6.22 (and 2.6.21), does not Hot Plug john_flowers
2008-01-03 18:18 ` Ian Abbott
2008-01-08 13:40 ` Ian Abbott
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome