mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
@ 2022-09-26 14:32 Sergiu Moga
  2022-09-26 15:37 ` Nicolas Ferre
  0 siblings, 1 reply; 2+ messages in thread
From: Sergiu Moga @ 2022-09-26 14:32 UTC (permalink / raw)
  To: gregkh, jirislaby, sergiu.moga, claudiu.beznea, richard.genoud,
	nicolas.ferre
  Cc: linux-serial, linux-kernel, kernel test robot

Now that the driver makes use of `__clk_is_enabled()` in order to
know whether a `clk_disable_unprepare()` is needed or not on the
GCLK, a new dependency has been introduced: COMMON_CLK. If this
`CONFIG_COMMON_CLK` is not enabled, whatever config may have this
driver enabled without COMMON_CLK then an undefined reference to
`__clk_is_enabled()` will be issued by the linker.

Thus, make sure that, unless `CONFIG_COMMON_CLK` is enabled, this
driver is not compiled.

Fixes: 5e3ce1f26129 ("tty: serial: atmel: Make the driver aware of the existence of GCLK")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
---
 drivers/tty/serial/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a18dd525e42b..1aec3cf002f7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -127,6 +127,7 @@ config SERIAL_SB1250_DUART_CONSOLE
 
 config SERIAL_ATMEL
 	bool "AT91 on-chip serial port support"
+	depends on COMMON_CLK
 	depends on ARCH_AT91 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
-- 
2.34.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2022-09-26 16:47 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-26 14:32 [PATCH] tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL Sergiu Moga
2022-09-26 15:37 ` Nicolas Ferre

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®