Re: [PATCH] x86_32: trim memory by updating e820 v3

[Gabriel C <nix.or.die@googlemail.com>]

Gabriel C wrote:
> Gabriel C wrote:
>> Yinghai Lu wrote:
>>> On Mon, Apr 28, 2008 at 7:24 AM, Gabriel C <nix.or.die@googlemail.com> wrote:
>>>> Mika Fischer wrote:
>>>>  > Hi Ingo,
>>>>  >
>>>>  > I'm having the same problem.
>>>>  >
>>>>  > Ingo Molnar schrieb:
>>>>  >> excellent. So just to make sure: this box never had proper graphics
>>>>  >> under Linux (under no previous kernel), due to the way the BIOS has set
>>>>  >> up the MTRR's, right?
>>>>  >
>>>>  > Well, not quite. X still works fine, but since the video memory is
>>>>  > overlapped by two of the existing MTRRs, X cannot add a write-combining
>>>>  > range for the video memory. That makes X rather slow especially if you
>>>>  > use DRI for Compiz etc.
>>>>
>>>>  Well you are lucky then :)
>>>>
>>>>  Yeah X 'worked' but it worked as slow as with vesa video driver here.
>>> [    0.000000] rangeX: 0000000000000000 - 00000000d0000000
>>> [    0.000000] Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
>>> [    0.000000] Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
>>> [    0.000000] Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
>>> [    0.000000] range0: 00000000cf800000 - 00000000cf800000
>>> [    0.000000] range: 00000000cf800000 - 00000000d0000000
>>> [    0.000000] Setting variable MTRR 3, base: 3320MB, range: 8MB, type WB
>>> [    0.000000] range0: 0000000100000000 - 0000000120000000
>>> [    0.000000] Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
>>> [    0.000000] range: 0000000120000000 - 0000000130000000
>>> [    0.000000] Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB
>>> [    0.000000] hole: 000000012c000000 - 0000000130000000
>>> [    0.000000] Setting variable MTRR 6, base: 4800MB, range: 64MB, type UC
>>>
>>> so your X server need two entries for WB?
>>>
>>> can you send out /proc/mtrr with booting with disable_mtrr_cleanup?
>> I can just not right now , cannot reboot the box yet. In about 1h or so , maybe less.
> 
> Here the output with v3 which is disabled by default:
> 
> --($:~)-- cat /proc/mtrr
> reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
> reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
> reg02: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
> reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
> reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
> reg05: base=0x128000000 (4736MB), size=  64MB: write-back, count=1
> reg06: base=0xcf600000 (3318MB), size=   2MB: uncachable, count=1
> 
> dmesg is saying now :
> 
> [   22.764595] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
> 
> 
> My card settings in BIOS ( that was default ) are the following :
> 
> DVMT Mode -> DVMT Mode ( possible setting DVMT Mode or Fixed Mode )
> DVMT / Memory -> 256MB ( possible settings 128/256 MB or Maximum DVMT )
> 
> Initiate Graphics Adapter -> PEG/PCI ( possible settings IGD , PCI/IGD , PCI/PEG , PEG/IGD )
> Internal Graphics Mode Select -> Enabled,8MB ( possible settings Enabled,8MB , Enabled,1MB maybe Disabled I forgot to look)
> PEG Port -> Auto ( possible settings Auto , Disabled )
> PEG Port Force x1 -> Disabled ( possible settings Enabled , Disabled )
> 
> Of course these settings are only possible when the card is not disabled :)
> 
> I'm gonna try v4 now and enable it. Please let me know if you need more infos.

Hmm v4 doesn't work anymore here ( I've tested with all possible settings in BIOS ).
It takes 6 minutes to boot to :

sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

after that the box hangs :/