From: Mark Hounschell <dmarkh@cfl.rr.com>
To: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Hounschell <markh@compro.net>,
Andreas Herrmann <andreas.herrmann3@amd.com>,
john stultz <johnstul@us.ibm.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Thomas Gleixner <tglx@linutronix.de>
Subject: Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-II processor
Date: Thu, 19 Feb 2009 05:37:00 -0500 [thread overview]
Message-ID: <499D364C.3010704@cfl.rr.com> (raw)
In-Reply-To: <499C7AC8.4080609@cfl.rr.com>
Mark Hounschell wrote:
> Borislav Petkov wrote:
snip.
>>> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>> HPET0 prog. values: now 20642, delta 14318, cfg: 0x15c,
>>> HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>>> Calibrating delay loop (skipped), value calculated using timer frequency..
>>> 6000.59 BogoMIPS (lpj=3000297)
>>> Security Framework initialized
>>> Mount-cache hash table entries: 512
>>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>>> CPU: L2 Cache: 512K (64 bytes/line)
>>> CPU: Physical Processor ID: 0
>>> CPU: Processor Core ID: 0
>>> using C1E aware idle routine
>>> Checking 'hlt' instruction...
>> now if you retry the same thing, does the machine hang with the exact
>> same output/at the exact same place in the boot process or it differs
>> each time?
>>
>
> Yes, now it does. I've done it about 5 times. Same...
>
> Mark
If I make the check_hlt routine just return I get what _appears_ to be what you
need to see.
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-1000Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #5 SMP PREEMPT Thu Feb9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 374cf000 - 37fef40f
Allocated new RAMDISK: 004a7000 - 00fc740f
Move RAMDISK from 00000000374cf000 - 0000000037fef40e to 004a7000 - 00fc740e
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000fc740f] NEW RAMDISK ==> [00004a7000 - 0000fc740f]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=g
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3000.183 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3103452k/3145600k available (1835k kernel code, 40788k reserved, 1099k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf97 - 0xc03ddc4c (1099 kB)
.text : 0xc0100000 - 0xc02caf97 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPET0 prog. values: now 1131, delta 14318, cfg: 0x15c,
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency..
6000.36 BogoMIPS (lpj=3000183)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... failed.
...trying to set up timer as Virtual Wire IRQ...
..... failed.
...trying to set up timer as ExtINT IRQ...
..... failed :(.
Kernel panic - not syncing: IO-APIC + timer doesn't work! Boot with apic=debug
and send a report. Then try booting with the 'noapic' option.
------------[ cut here ]------------
WARNING: at kernel/smp.c:333 smp_call_function_mask+0x2c/0x17d()
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.28.3-1000Hz #5
Call Trace:
[<c011e9cd>] warn_on_slowpath+0x40/0x61
[<c01d6ddd>] delay_tsc+0x6c/0x87
[<c01d6d00>] __const_udelay+0x19/0x2d
[<c0233a77>] wait_for_xmitr+0x33/0x74
[<c01d6ddd>] delay_tsc+0x6c/0x87
[<c01d6d13>] __const_udelay+0x2c/0x2d
[<c0233a77>] wait_for_xmitr+0x33/0x74
[<c02c7304>] _spin_unlock+0xc/0x1f
[<c02c7122>] _spin_lock_irqsave+0x11/0x2a
[<c0131116>] up+0x9/0x2a
[<c010d48e>] stop_this_cpu+0x0/0x30
[<c0139985>] smp_call_function_mask+0x2c/0x17d
[<c010d48e>] stop_this_cpu+0x0/0x30
[<c011f3e2>] vprintk+0x27e/0x2b4
[<c013ead4>] crash_kexec+0xa9/0xb0
[<c011f3e2>] vprintk+0x27e/0x2b4
[<c02c7122>] _spin_lock_irqsave+0x11/0x2a
[<c010d48e>] stop_this_cpu+0x0/0x30
[<c0139af8>] smp_call_function+0x22/0x47
[<c010d482>] native_smp_send_stop+0x18/0x24
[<c02c526d>] panic+0x51/0xdf
[<c03f155d>] setup_IO_APIC+0xac4/0xaf8
[<c01d6ddd>] delay_tsc+0x6c/0x87
[<c0233a00>] serial8250_verify_port+0xb/0x35
[<c02c7304>] _spin_unlock+0xc/0x1f
[<c02c7122>] _spin_lock_irqsave+0x11/0x2a
[<c0131116>] up+0x9/0x2a
[<c02c72a1>] _spin_unlock_irqrestore+0xe/0x21
[<c011ef7c>] release_console_sem+0x16d/0x19a
[<c011f3e2>] vprintk+0x27e/0x2b4
[<c02c6fe4>] _spin_lock+0xd/0x23
[<c02c5309>] printk+0xe/0x15
[<c02c3c65>] setup_local_APIC+0x16e/0x207
[<c010e789>] setup_apic_nmi_watchdog+0x1e/0x81
[<c03ed93a>] native_smp_prepare_cpus+0x3ab/0x441
[<c03e31f0>] kernel_init+0x43/0x144
[<c03e31ad>] kernel_init+0x0/0x144
[<c010464b>] kernel_thread_helper+0x7/0x10
---[ end trace 4eaa2a86a8e2da22 ]---
Here is the same part of the log with a 250Hz kernel that does boot. (without
your little printk patch though)
BIOS EBDA/lowmem at: 0009f000/0009f000
Initializing cgroup subsys cpuset
Linux version 2.6.28.3-250Hz (root@harley) (gcc version 4.3.1 20080507
(prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Fri
Feb 9
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.5 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0xbffe0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
RAMDISK: 375a8000 - 37fef479
Allocated new RAMDISK: 004a7000 - 00eee479
Move RAMDISK from 00000000375a8000 - 0000000037fef478 to 004a7000 - 00eee478
ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
ACPI: FACS BFFE0000, 0040
ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
2183MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00004a3c54] TEXT DATA BSS ==> [0000100000 - 00004a3c54]
#4 [00004a4000 - 00004a7000] INIT_PG_TABLE ==> [00004a4000 - 00004a7000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [00004a7000 - 0000eee479] NEW RAMDISK ==> [00004a7000 - 0000eee479]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f3f00] 000f3f00
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000bffe0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffe0
ACPI: PM-Timer IO Port: 0x4008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780143
Kernel command line: root=/dev/disk/by-id/ata-ST3320620AS_6QF4HDV5-part5
hwprobe=-modules.pata apm=off selinux=0 noresume splash=silent apic=debug console=g
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration matches PMTIMER. 1 loops
Detected 3000.243 MHz processor.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3104320k/3145600k available (1835k kernel code, 39920k reserved, 1095k
data, 276k init, 2236296k highmem)
virtual kernel memory layout:
fixmap : 0xffe19000 - 0xfffff000 (1944 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc03e3000 - 0xc0428000 ( 276 kB)
.data : 0xc02caf27 - 0xc03dcc4c (1095 kB)
.text : 0xc0100000 - 0xc02caf27 (1835 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency..
6000.48 BogoMIPS (lpj=12000972)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
Getting VERSION: 80050010
Getting VERSION: 80050010
Getting ID: 0
Getting ID: f000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ENABLING IO-APIC IRQs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD Phenom(tm) II X4 940 Processor stepping 02
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1250071
... PM timer delta = 357950
... PM timer result ok
..... delta 1250071
..... mult: 53686785
..... calibration result: 800045
..... CPU clock speed is 3000.0687 MHz.
..... host bus clock speed is 200.0045 MHz.
Booting processor 1 APIC 0x1 ip 0x6000
Regards
Mark
next prev parent reply other threads:[~2009-02-19 10:37 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-18 12:38 Mark Hounschell
2009-01-19 8:48 ` Mark Hounschell
2009-01-19 12:41 ` Bartlomiej Zolnierkiewicz
2009-01-19 14:45 ` Mark Hounschell
2009-01-19 23:05 ` Mark Hounschell
2009-01-19 14:22 ` Borislav Petkov
2009-01-19 14:54 ` Mark Hounschell
2009-01-19 23:14 ` Mark Hounschell
2009-01-20 0:25 ` john stultz
2009-01-20 9:08 ` Mark Hounschell
2009-01-20 9:37 ` Andreas Herrmann
2009-01-20 21:08 ` Mark Hounschell
2009-01-23 9:34 ` Mark Hounschell
2009-01-23 13:04 ` Andreas Herrmann
2009-01-23 14:47 ` Borislav Petkov
2009-01-23 22:24 ` Mark Hounschell
2009-01-23 22:46 ` Mark Hounschell
2009-01-26 18:26 ` Mark Hounschell
2009-01-27 16:38 ` Borislav Petkov
2009-01-28 0:30 ` Mark Hounschell
2009-01-28 0:33 ` Mark Hounschell
2009-01-31 9:15 ` Mark Hounschell
2009-02-02 17:05 ` Borislav Petkov
2009-02-03 9:17 ` Mark Hounschell
2009-02-03 15:11 ` Borislav Petkov
2009-02-03 19:15 ` Mark Hounschell
2009-02-05 17:19 ` Mark Hounschell
2009-02-06 13:52 ` Borislav Petkov
2009-02-06 14:11 ` Mark Hounschell
2009-02-06 17:55 ` Mark Hounschell
2009-02-06 22:20 ` Mark Hounschell
2009-02-09 14:18 ` Borislav Petkov
2009-02-09 15:29 ` Mark Hounschell
2009-02-18 13:11 ` Mark Hounschell
2009-02-18 14:18 ` Borislav Petkov
2009-02-18 16:57 ` Mark Hounschell
2009-02-18 17:42 ` Borislav Petkov
2009-02-18 21:16 ` Mark Hounschell
2009-02-19 10:37 ` Mark Hounschell [this message]
2009-02-19 14:11 ` Andreas Herrmann
2009-02-19 15:16 ` Mark Hounschell
2009-02-19 15:19 ` Borislav Petkov
2009-02-19 15:54 ` Mark Hounschell
2009-02-20 11:53 ` Andreas Herrmann
2009-02-20 12:34 ` Ingo Molnar
2009-02-20 21:51 ` Andreas Herrmann
2009-02-20 15:43 ` Mark Hounschell
2009-02-20 16:08 ` Andreas Herrmann
2009-02-20 16:38 ` Andreas Herrmann
2009-02-20 17:09 ` Mark Hounschell
2009-02-20 17:40 ` Mark Hounschell
2009-02-20 18:22 ` Andreas Herrmann
2009-02-20 18:28 ` Mark Hounschell
2009-02-20 19:54 ` Mark Hounschell
2009-02-20 20:27 ` Mark Hounschell
2009-02-20 22:28 ` Andreas Herrmann
2009-02-21 1:14 ` Mark Hounschell
2009-02-21 13:20 ` Mark Hounschell
2009-02-20 17:06 ` Mark Hounschell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=499D364C.3010704@cfl.rr.com \
--to=dmarkh@cfl.rr.com \
--cc=andreas.herrmann3@amd.com \
--cc=borislav.petkov@amd.com \
--cc=johnstul@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=markh@compro.net \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome