From: Mark Hounschell <dmarkh@cfl.rr.com>
To: Alain Knaff <alain@knaff.lu>
Cc: Mark Hounschell <markh@compro.net>,
Linus Torvalds <torvalds@linux-foundation.org>,
linux-kernel@vger.kernel.org, fdutils@fdutils.linux.lu
Subject: Re: [Fdutils] DMA cache consistency bug introduced in 2.6.28 (Was: Re: Cannot format floppies under kernel 2.6.*?)
Date: Fri, 18 Dec 2009 05:55:02 -0500 [thread overview]
Message-ID: <4B2B5F86.1090403@cfl.rr.com> (raw)
In-Reply-To: <4B2B4485.6000305@cfl.rr.com>
On 12/18/2009 03:59 AM, Mark Hounschell wrote:
> On 12/17/2009 06:24 PM, Alain Knaff wrote:
>
>>
>> Now, I only need to find a machine locally to test this on. Or Mark: are
>> you confident in doing this yourself?
>>
>
> I'll give it a shot. Sounds easy enough. If I have problems, I'll yell.
>
Ok, I ran into a build issue on the third on.
#harley:/usr/src # git clone
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-allstable.git
Initialized empty Git repository in /usr/src/linux-2.6-allstable/.git/
remote: Counting objects: 1486248, done.
remote: Compressing objects: 100% (248092/248092), done.
Receiving objects: 100% (1486248/1486248), 323.35 MiB | 6753 KiB/s, done.
remote: Total 1486248 (delta 1236282), reused 1476516 (delta 1227133)
Resolving deltas: 100% (1236282/1236282), done.
Checking out files: 100% (31502/31502), done.
harley:/usr/src # cd linux-2.6-allstable
harley:/usr/src/linux-2.6-allstable # git bisect start
harley:/usr/src/linux-2.6-allstable # git bisect bad v2.6.28
harley:/usr/src/linux-2.6-allstable # git bisect good v2.6.27.41
Bisecting: a merge base must be tested
[3fa8749e584b55f1180411ab1b51117190bac1e5] Linux 2.6.27
Build and test kernel: This one worked so:
harley:/usr/src/linux-2.6-allstable # git bisect good
Bisecting: 4879 revisions left to test after this (roughly 12 steps)
[c813b4e16ead3c3df98ac84419d4df2adf33fe01] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Build and test kernel: This one worked so:
harley:/usr/src/linux-2.6-allstable # git bisect good
Bisecting: 2443 revisions left to test after this (roughly 11 steps)
[db563fc2e80534f98c7f9121a6f7dfe41f177a79] Merge
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
This one doesn't build:
CC [M] fs/ext3/super.o
fs/ext3/super.c: In function ‘ext3_quota_on’:
fs/ext3/super.c:2839: error: ‘nd’ undeclared (first use in this function)
fs/ext3/super.c:2839: error: (Each undeclared identifier is reported only once
fs/ext3/super.c:2839: error: for each function it appears in.)
make[2]: *** [fs/ext3/super.o] Error 1
make[1]: *** [fs/ext3] Error 2
make: *** [fs] Error 2
I haven't yet determined that I can but, if I were to make a modification to the
tree now to fix this would that screw up the bisect process?
Regards
Mark
next prev parent reply other threads:[~2009-12-18 10:55 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4AFB3962.2020106@ntlworld.com>
[not found] ` <4B2610F8.7050609@cfl.rr.com>
[not found] ` <4B2618EF.9020709@knaff.lu>
[not found] ` <4B264448.5040604@compro.net>
[not found] ` <4B26884C.8000306@knaff.lu>
[not found] ` <4B2697C4.2040204@compro.net>
[not found] ` <4B26A82E.5040902@knaff.lu>
[not found] ` <4B26B031.4060301@compro.net>
[not found] ` <4B26BAE3.2090408@knaff.lu>
[not found] ` <4B275975.8040509@cfl.rr.com>
[not found] ` <4B275B18.80704@knaff.lu>
[not found] ` <4B275D37.4090807@cfl.rr.com>
[not found] ` <4B2761E9.2030301@knaff.lu>
[not found] ` <4B276513.6030509@cfl.rr.com>
[not found] ` <4B276753.80807@knaff.lu>
[not found] ` <4B27983F.5090600@compro.net>
[not found] ` <4B27EF18.7050101@knaff.lu>
[not found] ` <4B28FDEB.3030800@compro.net>
[not found] ` <4B290029.90602@knaff.lu>
[not found] ` <4B2901DB.8040403@compro.net>
[not found] ` <4B29052B.9070406@knaff.lu>
[not found] ` <4B292D84.5040306@compro.net>
[not found] ` <4B29624F.2080109@knaff.lu>
[not found] ` <4B2A3805.8040707@compro.net>
[not found] ` <4B2A3E3E.8060405@knaff.lu>
[not found] ` <4B2A4975.8020809@compro.net>
[not found] ` <4B2A49F4.6070402@compro.net>
[not found] ` <4B2A4B86.8060307@knaff.lu>
[not found] ` <4B2A4C78.10107@compro.net>
[not found] ` <4B2A4CF7.6040000@knaff.lu>
[not found] ` <4B2A4EC9.2030902@compro.net>
[not found] ` <4B2A4FA5.5000701@knaff.lu>
[not found] ` <4B2A5192.6090602@compro.net>
[not found] ` <4B2A530D.3080606@knaff! .lu>
[not found] ` <4B2A530D.3080606@knaff.lu>
2009-12-17 17:00 ` DMA cache consistency bug introduced in 2.6.28 (Was: Re: [Fdutils] " Alain Knaff
2009-12-17 17:27 ` Linus Torvalds
2009-12-17 18:21 ` DMA cache consistency bug introduced in 2.6.28 Krzysztof Halasa
2009-12-17 20:46 ` DMA cache consistency bug introduced in 2.6.28 (Was: Re: [Fdutils] Cannot format floppies under kernel 2.6.*?) Alain Knaff
2009-12-17 21:14 ` Linus Torvalds
2009-12-17 22:11 ` Alain Knaff
2009-12-17 22:43 ` Linus Torvalds
2009-12-17 23:24 ` Alain Knaff
2009-12-18 8:59 ` Mark Hounschell
2009-12-18 10:55 ` Mark Hounschell [this message]
2009-12-18 15:01 ` [Fdutils] DMA cache consistency bug introduced in 2.6.28 Krzysztof Halasa
2009-12-18 15:22 ` [Fdutils] DMA cache consistency bug introduced in 2.6.28 (Was: Re: Cannot format floppies under kernel 2.6.*?) Linus Torvalds
2009-12-18 15:28 ` Mark Hounschell
2009-12-18 15:45 ` Linus Torvalds
2009-12-18 20:04 ` Mark Hounschell
2009-12-18 20:15 ` Linus Torvalds
2009-12-22 15:11 ` Mark Hounschell
2009-12-22 17:38 ` Linus Torvalds
2009-12-22 17:57 ` Mark Hounschell
2009-12-22 23:37 ` Pallipadi, Venkatesh
2009-12-23 0:22 ` Mark Hounschell
2009-12-23 13:02 ` Mark Hounschell
2009-12-23 15:10 ` Pallipadi, Venkatesh
2009-12-23 15:34 ` Mark Hounschell
2009-12-23 15:57 ` Mark Hounschell
2009-12-23 16:31 ` Linus Torvalds
2009-12-23 16:38 ` [Fdutils] DMA cache consistency bug introduced in 2.6.28 Andi Kleen
2009-12-23 16:49 ` Linus Torvalds
2009-12-23 17:08 ` Andi Kleen
2009-12-25 12:21 ` Arjan van de Ven
2009-12-25 20:33 ` Andi Kleen
2009-12-26 9:38 ` Arjan van de Ven
2009-12-26 16:40 ` Andi Kleen
2009-12-27 12:28 ` Alain Knaff
2009-12-28 1:54 ` Andi Kleen
2009-12-28 10:27 ` Alain Knaff
2009-12-28 14:54 ` Andi Kleen
2009-12-27 11:09 ` Pavel Machek
2009-12-28 20:54 ` Mark Hounschell
2009-12-23 17:19 ` Pallipadi, Venkatesh
2009-12-23 17:16 ` Andi Kleen
2009-12-23 20:11 ` alain
2009-12-23 17:41 ` Mark Hounschell
2009-12-23 18:01 ` Linus Torvalds
2009-12-23 18:11 ` Mark Hounschell
2009-12-23 19:18 ` Pallipadi, Venkatesh
2009-12-23 19:35 ` Mark Hounschell
2009-12-23 20:30 ` Pallipadi, Venkatesh
2009-12-23 20:34 ` alain
2009-12-23 21:34 ` Pallipadi, Venkatesh
2010-01-08 17:42 ` Mark Hounschell
2010-01-12 0:19 ` Pallipadi, Venkatesh
2010-01-12 9:04 ` Mark Hounschell
2010-01-15 2:01 ` Pallipadi, Venkatesh
2010-01-15 9:39 ` Mark Hounschell
2010-01-15 18:02 ` Mark Hounschell
2010-01-21 19:09 ` [PATCH] x86: Disable HPET MSI on ATI SB700/SB800 Pallipadi, Venkatesh
2010-01-22 22:00 ` [tip:x86/urgent] " tip-bot for Pallipadi, Venkatesh
2010-01-23 6:51 ` tip-bot for Pallipadi, Venkatesh
2010-01-23 7:21 ` [PATCH] " Yuhong Bao
2010-01-25 17:10 ` Andreas Herrmann
2010-01-28 9:17 ` Mark Hounschell
2010-01-28 13:25 ` Mark Hounschell
2010-01-28 13:41 ` Borislav Petkov
2010-01-28 14:45 ` Mark Hounschell
2010-05-17 14:59 ` Andreas Herrmann
2010-05-17 15:10 ` Yuhong Bao
2010-05-17 15:12 ` Linus Torvalds
2010-05-17 16:46 ` Andreas Herrmann
2010-05-18 0:56 ` Robert Hancock
2010-05-18 1:02 ` Linus Torvalds
2010-05-18 1:06 ` Robert Hancock
2010-05-18 8:45 ` Andi Kleen
2010-05-18 23:22 ` Robert Hancock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B2B5F86.1090403@cfl.rr.com \
--to=dmarkh@cfl.rr.com \
--cc=alain@knaff.lu \
--cc=fdutils@fdutils.linux.lu \
--cc=linux-kernel@vger.kernel.org \
--cc=markh@compro.net \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
Powered by JetHome