Re: tip/master broken with x2apic and kexec

[Yinghai Lu <yinghai@kernel.org>]

On 07/14/2010 02:05 PM, Don Zickus wrote:
> On Wed, Jul 14, 2010 at 01:35:44PM -0700, Yinghai Lu wrote:
>> On 07/13/2010 04:27 PM, Yinghai Lu wrote:
>>> On 07/13/2010 03:00 PM, H. Peter Anvin wrote:
>>>> On 07/12/2010 07:59 PM, Yinghai Lu wrote:
>>>>> tip/master: 
>>>>> system1: BIOS enabled x2apic, first kernel boot well, and when kexec second kernel will cause system instant reboot.
>>>>>
>>>>> system2: BIOS not enable x2apic, first kernel boot well and enable x2apic, and kexec second kernel well. but when kexec third kernel will case system instant reboot.
>>>>>
>>>>> linus' tree is ok.
>>>>>
>>>>> but for system2 if boot with nox2apic ,intr-remaping off, iommu off, the kexec loop test will pass.
>>>>>
>>>>> the problem looks start in recent two or three weeks.
>>>>>
>>>>> Any idea?
>>>>>
>>>>> bisecting will take a while, because the system post take a while everytime.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Yinghai Lu
>>>>
>>>> OK, I found the bug... if you could test out the patch which will be
>>>> sent out shortly I would very much appreciate it.
>>>
>>> not sure if your patch is the offending one now.
>>>
>>> kL: kernel from linus tree
>>> kT1: kernel from tip
>>> kT2: kernel from tip with reverting your patch
>>>
>>> BIOS-->kL ---> kL ---> kL....always working
>>> BIOS-->kT1 ---> kT1 --->  kT1 : between second one and third one system reset instant...
>>> BIOS-->kT2 ---> kT2 --->  kT2 : between second one and third one system reset instant...
>>>
>>> BIOS-->kL ---> kL ---> kL ---> then kT1 ---> kT1 .... always working
>>> BIOS-->kL ---> kL ---> kL ---> then kT2 ---> kT2 .... always working
>>>
>>
>> bisecting said:
>>
>>> git bisect good
>> 58687acba59266735adb8ccd9b5b9aa2c7cd205b is the first bad commit
>> commit 58687acba59266735adb8ccd9b5b9aa2c7cd205b
>> Author: Don Zickus <dzickus@redhat.com>
>> Date:   Fri May 7 17:11:44 2010 -0400
> 
> What do you mean by instant reboot?  This code isn't really exercised
> until the cpus come online.

when call kexec -e
get 
Starting kernel ...

then should have second kernel booting

instead, I get BIOS post.

Yinghai