Re: [PATCH] cxacru: Use a bulk URB to access the command endpoint

[Simon Arlott <simon@fire.lp0.eu>]

Please drop this patch, I'll make a version that detects which type of
endpoint it is and uses an interrupt or bulk URB as appropriate. Some
devices which may/may not be compatible appear to have interrupt
command endpoints as referenced in the original comment.

On 30/08/10 22:50, Simon Arlott wrote:
> The command endpoint is a bulk endpoint, but interrupt transfers
> are used to access it when checking status, load firmware or alter
> the configuration.
> 
> This causes an error if CONFIG_USB_DEBUG is enabled after commit
> f661c6f8c67bd55e93348f160d590ff9edf08904, which checks for this
> mismatch.
> 
> Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
> ---
>  drivers/usb/atm/cxacru.c |   14 +++++++-------
>  1 files changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
> index 593fc5e..3b45f57 100644
> --- a/drivers/usb/atm/cxacru.c
> +++ b/drivers/usb/atm/cxacru.c
> @@ -49,7 +49,7 @@
>  
>  static const char cxacru_driver_name[] = "cxacru";
>  
> -#define CXACRU_EP_CMD		0x01	/* Bulk/interrupt in/out */
> +#define CXACRU_EP_CMD		0x01	/* Bulk in/out */
>  #define CXACRU_EP_DATA		0x02	/* Bulk in/out */
>  
>  #define CMD_PACKET_SIZE		64	/* Should be maxpacket(ep)? */
> @@ -1171,15 +1171,15 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
>  		goto fail;
>  	}
>  
> -	usb_fill_int_urb(instance->rcv_urb,
> -			usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
> +	usb_fill_bulk_urb(instance->rcv_urb,
> +			usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
>  			instance->rcv_buf, PAGE_SIZE,
> -			cxacru_blocking_completion, &instance->rcv_done, 1);
> +			cxacru_blocking_completion, &instance->rcv_done);
>  
> -	usb_fill_int_urb(instance->snd_urb,
> -			usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
> +	usb_fill_bulk_urb(instance->snd_urb,
> +			usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
>  			instance->snd_buf, PAGE_SIZE,
> -			cxacru_blocking_completion, &instance->snd_done, 4);
> +			cxacru_blocking_completion, &instance->snd_done);
>  
>  	mutex_init(&instance->cm_serialize);
>  


-- 
Simon Arlott