* [PATCH] ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
@ 2025-09-25 10:49 stefan.prisacariu
2025-09-25 22:21 ` Frank Li
0 siblings, 1 reply; 4+ messages in thread
From: stefan.prisacariu @ 2025-09-25 10:49 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, devicetree,
imx, linux-arm-kernel, linux-kernel
Cc: Stefan Prisacariu
From: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
Make SoM .dtsi SoC-agnostic by moving SoC include to board level
imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this SoM
description Quad/Dual specific and prevents reuse from i.MX6DL boards.
Move the SoC selection to the board level:
- Drop the imx6q.dtsi include from the SoM .dtsi.
- Add imx6q.dtsi include to imx6q-var-mx6customboard.dts.
This keeps the SoM .dtsi SoC-agnostic (it already relies on imx6qdl.dtsi
for family-common parts) and allows boards using the DualLite or Solo to
include imx6dl.dtsi instead.
Why this is needed:
I need to reuse imx6qdl-var-som.dtsi for a board based on i.MX6DL
(VAR-SOM SoM + custom carrier). Without this change, the SoM .dtsi
forces imx6q.dtsi, which is incorrect for DL and breaks the layering
model used upstream.
Verification:
The DTB for imx6q-var-mx6customboard was rebuilt before and after this
change. Both the binary DTB and the decompiled DTS
(via dtc -I dtb -O dts -s) are identical, confirming no functional change
for the existing board.
Alignment:
This also aligns the layering with how it is already done for
imx6q-var-dt6customboard.dts, where the SoC include is handled at the
board level.
No functional changes for imx6q-var-mx6customboard are intended.
Files were introduced in:
commit e5c810848d2a ("ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6
SoM support")
commit a5b59a3f41bd ("ARM: dts: imx6q: Add Variscite MX6 Custom board
support")
Signed-off-by: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
---
arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 3 ---
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
index 18a620832a2a..a55644529c67 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
@@ -8,6 +8,7 @@
/dts-v1/;
+#include "imx6q.dtsi"
#include "imx6qdl-var-som.dtsi"
#include <dt-bindings/pwm/pwm.h>
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
index 59833e8d11d8..51bcaf04546b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
@@ -9,9 +9,6 @@
* Copyright 2022 Bootlin
*/
-/dts-v1/;
-
-#include "imx6q.dtsi"
#include <dt-bindings/clock/imx6qdl-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
base-commit: 8f5ff9784f3262e6e85c68d86f8b7931827f2983
--
2.49.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
2025-09-25 10:49 [PATCH] ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic stefan.prisacariu
@ 2025-09-25 22:21 ` Frank Li
2025-09-26 9:31 ` Stefan Prisacariu
0 siblings, 1 reply; 4+ messages in thread
From: Frank Li @ 2025-09-25 22:21 UTC (permalink / raw)
To: stefan.prisacariu
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, devicetree,
imx, linux-arm-kernel, linux-kernel
On Thu, Sep 25, 2025 at 12:49:40PM +0200, stefan.prisacariu@prevas.dk wrote:
> From: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
>
> Make SoM .dtsi SoC-agnostic by moving SoC include to board level
>
> imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this SoM
> description Quad/Dual specific and prevents reuse from i.MX6DL boards.
>
> Move the SoC selection to the board level:
> - Drop the imx6q.dtsi include from the SoM .dtsi.
> - Add imx6q.dtsi include to imx6q-var-mx6customboard.dts.
move imx6q.dtsi from imx6qdl-var-som.dtsi to imx6q-var-mx6customboard.dts.
>
> This keeps the SoM .dtsi SoC-agnostic (it already relies on imx6qdl.dtsi
> for family-common parts) and allows boards using the DualLite or Solo to
> include imx6dl.dtsi instead.
>
> Why this is needed:
> I need to reuse imx6qdl-var-som.dtsi for a board based on i.MX6DL
> (VAR-SOM SoM + custom carrier). Without this change, the SoM .dtsi
> forces imx6q.dtsi, which is incorrect for DL and breaks the layering
> model used upstream.
Can use simple words
To reuse imx6qdl-var-som.dtsi on i.MX6DL board.
>
> Verification:
> The DTB for imx6q-var-mx6customboard was rebuilt before and after this
> change. Both the binary DTB and the decompiled DTS
> (via dtc -I dtb -O dts -s) are identical, confirming no functional change
> for the existing board.
Needn't this section (good place for these informaiton is cover letter).
>
> Alignment:
> This also aligns the layering with how it is already done for
> imx6q-var-dt6customboard.dts, where the SoC include is handled at the
> board level.
Needn't this section
>
> No functional changes for imx6q-var-mx6customboard are intended.
good
>
> Files were introduced in:
> commit e5c810848d2a ("ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6
> SoM support")
> commit a5b59a3f41bd ("ARM: dts: imx6q: Add Variscite MX6 Custom board
> support")
Needn't this section.
>
> Signed-off-by: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
> ---
> arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts | 1 +
> arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 3 ---
> 2 files changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
> index 18a620832a2a..a55644529c67 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
> +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
> @@ -8,6 +8,7 @@
>
> /dts-v1/;
>
> +#include "imx6q.dtsi"
> #include "imx6qdl-var-som.dtsi"
> #include <dt-bindings/pwm/pwm.h>
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> index 59833e8d11d8..51bcaf04546b 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> @@ -9,9 +9,6 @@
> * Copyright 2022 Bootlin
> */
>
> -/dts-v1/;
why drop this line.
Frank
> -
> -#include "imx6q.dtsi"
> #include <dt-bindings/clock/imx6qdl-clock.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
>
> base-commit: 8f5ff9784f3262e6e85c68d86f8b7931827f2983
> --
> 2.49.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
2025-09-25 22:21 ` Frank Li
@ 2025-09-26 9:31 ` Stefan Prisacariu
2025-09-29 8:39 ` Stefan Prisacariu
0 siblings, 1 reply; 4+ messages in thread
From: Stefan Prisacariu @ 2025-09-26 9:31 UTC (permalink / raw)
To: Frank Li
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, devicetree,
imx, linux-arm-kernel, linux-kernel
On 26/09/2025 00.21, Frank Li wrote:
> On Thu, Sep 25, 2025 at 12:49:40PM +0200, stefan.prisacariu@prevas.dk wrote:
>> From: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
>>
>> Make SoM .dtsi SoC-agnostic by moving SoC include to board level
>>
>> imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this SoM
>> description Quad/Dual specific and prevents reuse from i.MX6DL boards.
>>
>> Move the SoC selection to the board level:
>> - Drop the imx6q.dtsi include from the SoM .dtsi.
>> - Add imx6q.dtsi include to imx6q-var-mx6customboard.dts.
> move imx6q.dtsi from imx6qdl-var-som.dtsi to imx6q-var-mx6customboard.dts.
>
>> This keeps the SoM .dtsi SoC-agnostic (it already relies on imx6qdl.dtsi
>> for family-common parts) and allows boards using the DualLite or Solo to
>> include imx6dl.dtsi instead.
>>
>> Why this is needed:
>> I need to reuse imx6qdl-var-som.dtsi for a board based on i.MX6DL
>> (VAR-SOM SoM + custom carrier). Without this change, the SoM .dtsi
>> forces imx6q.dtsi, which is incorrect for DL and breaks the layering
>> model used upstream.
> Can use simple words
>
> To reuse imx6qdl-var-som.dtsi on i.MX6DL board.
>
>> Verification:
>> The DTB for imx6q-var-mx6customboard was rebuilt before and after this
>> change. Both the binary DTB and the decompiled DTS
>> (via dtc -I dtb -O dts -s) are identical, confirming no functional change
>> for the existing board.
> Needn't this section (good place for these informaiton is cover letter).
>
>> Alignment:
>> This also aligns the layering with how it is already done for
>> imx6q-var-dt6customboard.dts, where the SoC include is handled at the
>> board level.
> Needn't this section
>
>> No functional changes for imx6q-var-mx6customboard are intended.
> good
>
>> Files were introduced in:
>> commit e5c810848d2a ("ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6
>> SoM support")
>> commit a5b59a3f41bd ("ARM: dts: imx6q: Add Variscite MX6 Custom board
>> support")
> Needn't this section.
>
>> Signed-off-by: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
>> ---
>> arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts | 1 +
>> arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 3 ---
>> 2 files changed, 1 insertion(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
>> index 18a620832a2a..a55644529c67 100644
>> --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
>> +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
>> @@ -8,6 +8,7 @@
>>
>> /dts-v1/;
>>
>> +#include "imx6q.dtsi"
>> #include "imx6qdl-var-som.dtsi"
>> #include <dt-bindings/pwm/pwm.h>
>>
>> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>> index 59833e8d11d8..51bcaf04546b 100644
>> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>> @@ -9,9 +9,6 @@
>> * Copyright 2022 Bootlin
>> */
>>
>> -/dts-v1/;
> why drop this line.
As far as I know this line should be present in the dts not dtsi files,
also this will remove the requirement to have this dtsi file first
included in
the dts files
Stefan
>
> Frank
>> -
>> -#include "imx6q.dtsi"
>> #include <dt-bindings/clock/imx6qdl-clock.h>
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/sound/fsl-imx-audmux.h>
>>
>> base-commit: 8f5ff9784f3262e6e85c68d86f8b7931827f2983
>> --
>> 2.49.1
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
2025-09-26 9:31 ` Stefan Prisacariu
@ 2025-09-29 8:39 ` Stefan Prisacariu
0 siblings, 0 replies; 4+ messages in thread
From: Stefan Prisacariu @ 2025-09-29 8:39 UTC (permalink / raw)
To: Frank Li
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, devicetree,
imx, linux-arm-kernel, linux-kernel
Hi Frank,
Please let me know if you want me to sent again this patch:
- with the simpler commit message
- add a cover letter to move the extra information
- keep the /dts-v1/; inside the .dtsi
Thank you,
Stefan
On 26/09/2025 11.31, Stefan Prisacariu wrote:
>
> On 26/09/2025 00.21, Frank Li wrote:
>> On Thu, Sep 25, 2025 at 12:49:40PM +0200, stefan.prisacariu@prevas.dk
>> wrote:
>>> From: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
>>>
>>> Make SoM .dtsi SoC-agnostic by moving SoC include to board level
>>>
>>> imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this
>>> SoM
>>> description Quad/Dual specific and prevents reuse from i.MX6DL boards.
>>>
>>> Move the SoC selection to the board level:
>>> - Drop the imx6q.dtsi include from the SoM .dtsi.
>>> - Add imx6q.dtsi include to imx6q-var-mx6customboard.dts.
>> move imx6q.dtsi from imx6qdl-var-som.dtsi to
>> imx6q-var-mx6customboard.dts.
>>
>>> This keeps the SoM .dtsi SoC-agnostic (it already relies on
>>> imx6qdl.dtsi
>>> for family-common parts) and allows boards using the DualLite or
>>> Solo to
>>> include imx6dl.dtsi instead.
>>>
>>> Why this is needed:
>>> I need to reuse imx6qdl-var-som.dtsi for a board based on i.MX6DL
>>> (VAR-SOM SoM + custom carrier). Without this change, the SoM .dtsi
>>> forces imx6q.dtsi, which is incorrect for DL and breaks the layering
>>> model used upstream.
>> Can use simple words
>>
>> To reuse imx6qdl-var-som.dtsi on i.MX6DL board.
>>
>>> Verification:
>>> The DTB for imx6q-var-mx6customboard was rebuilt before and after this
>>> change. Both the binary DTB and the decompiled DTS
>>> (via dtc -I dtb -O dts -s) are identical, confirming no functional
>>> change
>>> for the existing board.
>> Needn't this section (good place for these informaiton is cover letter).
>>
>>> Alignment:
>>> This also aligns the layering with how it is already done for
>>> imx6q-var-dt6customboard.dts, where the SoC include is handled at the
>>> board level.
>> Needn't this section
>>
>>> No functional changes for imx6q-var-mx6customboard are intended.
>> good
>>
>>> Files were introduced in:
>>> commit e5c810848d2a ("ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6
>>> SoM support")
>>> commit a5b59a3f41bd ("ARM: dts: imx6q: Add Variscite MX6 Custom board
>>> support")
>> Needn't this section.
>>
>>> Signed-off-by: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
>>> ---
>>> arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts | 1 +
>>> arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 3 ---
>>> 2 files changed, 1 insertion(+), 3 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
>>> b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
>>> index 18a620832a2a..a55644529c67 100644
>>> --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
>>> +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts
>>> @@ -8,6 +8,7 @@
>>>
>>> /dts-v1/;
>>>
>>> +#include "imx6q.dtsi"
>>> #include "imx6qdl-var-som.dtsi"
>>> #include <dt-bindings/pwm/pwm.h>
>>>
>>> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>>> b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>>> index 59833e8d11d8..51bcaf04546b 100644
>>> --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>>> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>>> @@ -9,9 +9,6 @@
>>> * Copyright 2022 Bootlin
>>> */
>>>
>>> -/dts-v1/;
>> why drop this line.
>
> As far as I know this line should be present in the dts not dtsi files,
> also this will remove the requirement to have this dtsi file first
> included in
> the dts files
>
> Stefan
>
>>
>> Frank
>>> -
>>> -#include "imx6q.dtsi"
>>> #include <dt-bindings/clock/imx6qdl-clock.h>
>>> #include <dt-bindings/gpio/gpio.h>
>>> #include <dt-bindings/sound/fsl-imx-audmux.h>
>>>
>>> base-commit: 8f5ff9784f3262e6e85c68d86f8b7931827f2983
>>> --
>>> 2.49.1
>>>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2025-09-29 8:40 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-09-25 10:49 [PATCH] ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic stefan.prisacariu
2025-09-25 22:21 ` Frank Li
2025-09-26 9:31 ` Stefan Prisacariu
2025-09-29 8:39 ` Stefan Prisacariu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®