[PATCH] arm64: dts: socfpga: use consistent QSPI boot partition label

[PATCH] arm64: dts: socfpga: use consistent QSPI boot partition label

[tze.yee.ng]

From: Tze Yee Ng <tze.yee.ng@altera.com>

Several SoCFPGA board DTS files labeled the first QSPI MTD partition
(qspi_boot / partition@0 under fixed-partitions) as "u-boot" while
others already used "Boot and fpga data". Align the QSPI boot
partition label only so naming matches the combined boot + FPGA
image layout and stays consistent across Agilex, N5X, and Stratix 10
SoCDK variants.

No QSPI partition layout or reg properties are changed.

Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
---
 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts         | 2 +-
 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts         | 2 +-
 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts    | 2 +-
 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
index 14b299f19f3a..f0a0964540a9 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
@@ -107,7 +107,7 @@ partitions {
 			#size-cells = <1>;
 
 			qspi_boot: partition@0 {
-				label = "u-boot";
+				label = "Boot and fpga data";
 				reg = <0x0 0x00c00000>;
 			};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
index 262bb3e8e5c7..5ce825dd6afb 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -86,7 +86,7 @@ partitions {
 			#size-cells = <1>;
 
 			qspi_boot: partition@0 {
-				label = "u-boot";
+				label = "Boot and fpga data";
 				reg = <0x0 0x04200000>;
 			};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts
index f71e1280c778..63b4a3814131 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts
@@ -101,7 +101,7 @@ partitions {
 			#size-cells = <1>;
 
 			qspi_boot: partition@0 {
-				label = "u-boot";
+				label = "Boot and fpga data";
 				reg = <0x0 0x00c00000>;
 			};
 
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts
index 1831402d8808..23076fe8961f 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts
@@ -84,7 +84,7 @@ partitions {
 			#size-cells = <1>;
 
 			qspi_boot: partition@0 {
-				label = "u-boot";
+				label = "Boot and fpga data";
 				reg = <0x0 0x04200000>;
 			};
 
-- 
2.43.7

Re: [PATCH] arm64: dts: socfpga: use consistent QSPI boot partition label

[Dinh Nguyen]

On 5/13/26 03:05, tze.yee.ng@altera.com wrote:
> From: Tze Yee Ng <tze.yee.ng@altera.com>
> 
> Several SoCFPGA board DTS files labeled the first QSPI MTD partition
> (qspi_boot / partition@0 under fixed-partitions) as "u-boot" while
> others already used "Boot and fpga data". Align the QSPI boot
> partition label only so naming matches the combined boot + FPGA
> image layout and stays consistent across Agilex, N5X, and Stratix 10
> SoCDK variants.
> 
> No QSPI partition layout or reg properties are changed.
> 
> Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
> ---
>   arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts         | 2 +-
>   arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts         | 2 +-
>   arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts    | 2 +-
>   arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_modular.dts | 2 +-
>   4 files changed, 4 insertions(+), 4 deletions(-)
> 

Applied!

Thanks,
Dinh