mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Furong Xu <0x1207@gmail.com>
To: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	xfr@outlook.com, Furong Xu <0x1207@gmail.com>
Subject: [PATCH net-next v1 2/3] net: stmmac: Set page_pool_params.max_len to a precise size
Date: Fri, 10 Jan 2025 17:53:58 +0800	[thread overview]
Message-ID: <4bfc67ece5ef615ce65972173f5256f10ea27f9a.1736500685.git.0x1207@gmail.com> (raw)
In-Reply-To: <cover.1736500685.git.0x1207@gmail.com>

DMA engine will always write no more than dma_buf_sz bytes of a received
frame into a page buffer, the remaining spaces are unused or used by CPU
exclusively.
Setting page_pool_params.max_len to almost the full size of page(s) helps
nothing more, but wastes more CPU cycles on cache maintenance.

For a standard MTU of 1500, then dma_buf_sz is assigned to 1536, and this
patch brings ~16.9% driver performance improvement in a TCP RX
throughput test with iPerf tool on a single isolated Cortex-A65 CPU
core, from 2.43 Gbits/sec increased to 2.84 Gbits/sec.

Signed-off-by: Furong Xu <0x1207@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.h  | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 43125a6f8f6b..c1aeaec53b4c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2038,7 +2038,7 @@ static int __alloc_dma_rx_desc_resources(struct stmmac_priv *priv,
 	pp_params.dev = priv->device;
 	pp_params.dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE;
 	pp_params.offset = stmmac_rx_offset(priv);
-	pp_params.max_len = STMMAC_MAX_RX_BUF_SIZE(num_pages);
+	pp_params.max_len = dma_conf->dma_buf_sz;
 
 	rx_q->page_pool = page_pool_create(&pp_params);
 	if (IS_ERR(rx_q->page_pool)) {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.h
index 896dc987d4ef..77ce8cfbe976 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.h
@@ -4,7 +4,6 @@
 #ifndef _STMMAC_XDP_H_
 #define _STMMAC_XDP_H_
 
-#define STMMAC_MAX_RX_BUF_SIZE(num)	(((num) * PAGE_SIZE) - XDP_PACKET_HEADROOM)
 #define STMMAC_RX_DMA_ATTR	(DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_WEAK_ORDERING)
 
 int stmmac_xdp_setup_pool(struct stmmac_priv *priv, struct xsk_buff_pool *pool,
-- 
2.34.1


  parent reply	other threads:[~2025-01-10  9:54 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-10  9:53 [PATCH net-next v1 0/3] net: stmmac: RX performance improvement Furong Xu
2025-01-10  9:53 ` [PATCH net-next v1 1/3] net: stmmac: Switch to zero-copy in non-XDP RX path Furong Xu
2025-01-13  9:41   ` Yanteng Si
2025-01-13 12:03     ` Alexander Lobakin
2025-01-13 15:16       ` Yanteng Si
2025-01-13 16:48       ` Andrew Lunn
2025-01-14 17:23         ` Alexander Lobakin
2025-01-10  9:53 ` Furong Xu [this message]
2025-01-10  9:53 ` [PATCH net-next v1 3/3] net: stmmac: Optimize cache prefetch in " Furong Xu
2025-01-13 12:10   ` Alexander Lobakin
2025-01-13 12:37     ` Furong Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4bfc67ece5ef615ce65972173f5256f10ea27f9a.1736500685.git.0x1207@gmail.com \
    --to=0x1207@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=xfr@outlook.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®