Re: [PATCH v10 2/4] Documentation/dt: Add descriptions for loongson display controller

[Jiaxun Yang <jiaxun.yang@flygoat.com>]

在 2022/2/20 14:55, Sui Jingfeng 写道:
> From: suijingfeng <suijingfeng@loongson.cn>
>
> Add DT documentation for loongson display controller found in LS2K1000,
> LS2K0500 and LS7A1000.
>
> v2: DT binding docs and includes should be a separate patch,
>      fix a warnning because of that.
>
> v3: split dt-bindings from other changes into a separate patch.
>
> v4: fix warnings and errors when running make dt_binding_check
>
> Reported-by: Rob Herring <robh@kernel.org>
> Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
> Signed-off-by: suijingfeng <suijingfeng@loongson.cn>
> Signed-off-by: Sui Jingfeng <15330273260@189.cn>
> ---
>   .../loongson/loongson,display-controller.yaml | 122 ++++++++++++++++++
>   1 file changed, 122 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
> new file mode 100644
> index 000000000000..ee1a59b91943
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings
> +
> +maintainers:
> +  - Sui Jingfeng <suijingfeng@loongson.cn>
> +
> +description: |+
> +
> +  Loongson display controllers are simple which require scanout buffers
> +  to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system
> +  memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped
> +  with a dedicated video ram which is 64MB or more.
> +
> +  For LS7A1000, there are 4 dedicated GPIOs whose control register is
> +  located at the DC register space. They are used to emulate two way i2c,
> +  One for DVO0, another for DVO1.
> +
> +  LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either
> +  general purpose GPIO emulated i2c or hardware i2c in the SoC.
> +
> +  LSDC has two display pipes, each way has a DVO interface which provide
> +  RGB888 signals, vertical & horizontal synchronisations, data enable and
> +  the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from
> +  1920x1080 resolution at 60Hz. Each CRTC has two FB address registers.
> +
> +  LSDC's display pipeline have several components as below description,
> +
> +  The display controller in LS7A1000:
> +    ___________________                                     _________
> +    |            -------|                                   |         |
> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
> +    |  _   _     -------|        ^             ^            |_________|
> +    | | | | |    -------|        |             |
> +    | |_| |_|    | i2c0 <--------+-------------+
> +    |            -------|
> +    |   DC IN LS7A1000  |
> +    |  _   _     -------|
> +    | | | | |    | i2c1 <--------+-------------+
> +    | |_| |_|    -------|        |             |             _________
> +    |            -------|        |             |            |         |
> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
> +    |            -------|                                   |_________|
> +    |___________________|
> +
> +  Simple usage of LS7A1000 with LS3A4000 CPU:
> +
> +    +------+            +-----------------------------------+
> +    | DDR4 |            |  +-------------------+            |
> +    +------+            |  | PCIe Root complex |   LS7A1000 |
> +       || MC0           |  +--++---------++----+            |
> +  +----------+  HT 3.0  |     ||         ||                 |
> +  | LS3A4000 |<-------->| +---++---+  +--++--+    +---------+   +------+
> +  |   CPU    |<-------->| | GC1000 |  | LSDC |<-->| DDR3 MC |<->| VRAM |
> +  +----------+          | +--------+  +-+--+-+    +---------+   +------+
> +       || MC1           +---------------|--|----------------+
> +    +------+                            |  |
> +    | DDR4 |          +-------+   DVO0  |  |  DVO1   +------+
> +    +------+   VGA <--|ADV7125|<--------+  +-------->|TFP410|--> DVI/HDMI
> +                      +-------+                      +------+
> +
> +  The display controller in LS2K1000/LS2K0500:
> +     ___________________                                     _________
> +    |            -------|                                   |         |
> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
> +    |  _   _     -------|        ^              ^           |_________|
> +    | | | | |           |        |              |
> +    | |_| |_|           |     +------+          |
> +    |                   <---->| i2c0 |<---------+
> +    |   DC IN LS2K1000  |     +------+
> +    |  _   _            |     +------+
> +    | | | | |           <---->| i2c1 |----------+
> +    | |_| |_|           |     +------+          |            _________
> +    |            -------|        |              |           |         |
> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
> +    |            -------|                                   |_________|
> +    |___________________|
> +
> +properties:
> +  $nodename:
> +    pattern: "^display-controller@[0-9a-f],[0-9a-f]$"
> +
> +  compatible:
> +    enum:
> +      - loongson,ls7a1000-dc
> +      - loongson,ls2k1000-dc
> +      - loongson,ls2k0500-dc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
Given that it is possible to have output subnodes I guess 
additionalProperties
should be allowed?

Thanks.
- Jiaxun
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    bus {
> +
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +        #interrupt-cells = <2>;
> +
> +        lsdc: display-controller@6,1 {
> +            compatible = "loongson,ls7a1000-dc";
> +            reg = <0x3100 0x0 0x0 0x0 0x0>;
> +            interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-parent = <&pic>;
> +        };
> +    };
> +...