Re: [PATCH 3/5] dt-bindings: ti-lmu: Modify dt bindings for the LM3697

[Jacek Anaszewski <jacek.anaszewski@gmail.com>]

Hi Dan,

Thank you for the patch.

You need Lee Jones on CC for this series.

One more comment below.

On 3/25/19 3:24 PM, Dan Murphy wrote:
> The LM3697 is a single function LED driver. The single function LED
> driver needs to reside in the LED directory as a dedicated LED driver
> and not as a MFD device.  The device does have common brightness and ramp
> features and those can be accomodated by a TI LMU framework.
> 
> The LM3697 dt binding needs to be moved from the ti-lmu.txt and a dedicated
> LED dt binding needs to be added.  The new LM3697 LED dt binding will then
> reside in the Documentation/devicetree/bindings/leds directory and follow the
> current LED and general bindings guidelines.
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
>   .../devicetree/bindings/leds/leds-lm3697.txt  | 77 +++++++++++++++++++
>   .../devicetree/bindings/mfd/ti-lmu.txt        | 26 +------
>   2 files changed, 78 insertions(+), 25 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/leds/leds-lm3697.txt
> 
> diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
> new file mode 100644
> index 000000000000..a780f11acd38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
> @@ -0,0 +1,77 @@
> +* Texas Instruments - LM3697 Highly Efficient White LED Driver
> +
> +The LM3697 11-bit LED driver provides high-
> +performance backlight dimming for 1, 2, or 3 series
> +LED strings while delivering up to 90% efficiency.
> +
> +This device is suitable for display and keypad Lighting
> +
> +Required properties:
> +	- compatible:
> +		"ti,lm3697"
> +	- reg :  I2C slave address
> +	- #address-cells : 1
> +	- #size-cells : 0
> +
> +Optional properties:
> +	- enable-gpios : GPIO pin to enable/disable the device
> +	- vled-supply : LED supply
> +
> +Required child properties:
> +	- reg : 0 - LED is Controlled by bank A
> +		1 - LED is Controlled by bank B
> +	- led-sources : Indicates which HVLED string is associated to which
> +			control bank.  This is a zero based property so
> +			HVLED1 = 0, HVLED2 = 1, HVLED3 = 2.
> +			Additional information is contained
> +			in Documentation/devicetree/bindings/leds/common.txt
> +
> +Optional child properties:
> +	- max_brightness - This determines whether to use 8 bit brightness mode
> +			   or 11 bit brightness mode.  If this value is not
> +			   set the device is defaulted to the preferred 8bit
> +			   brightness mode per 7.3.4.1 of the data sheet.
> +			   The values are 255 (8bit) or 2047 (11bit).

We should use led-max-microamp for that, if possible.

-- 
Best regards,
Jacek Anaszewski