mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
To: "Amit Kumar Mahapatra" <amit.kumar-mahapatra@amd.com>,
	"Jonathan Cameron" <jic23@kernel.org>,
	"Michal Simek" <michal.simek@amd.com>,
	"Sai Krishna Potthuri" <sai.krishna.potthuri@amd.com>,
	"David Lechner" <dlechner@baylibre.com>,
	"Nuno Sá" <nuno.sa@analog.com>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, amitrkcian2002@gmail.com
Subject: Re: [PATCH 3/6] iio: adc: versal-sysmon: disable interrupts on shutdown
Date: Tue, 3 Nov 2026 12:37:29 +0530	[thread overview]
Message-ID: <4f330292-0fda-472b-8302-75ed5f6725eb@linux.microsoft.com> (raw)
In-Reply-To: <20261102122112.1723130-4-amit.kumar-mahapatra@amd.com>

Hi Amit,

On 02-11-2026 17:51, Amit Kumar Mahapatra wrote:
> Interrupt teardown is registered with devm_add_action_or_reset(), so
> sysmon_disable_interrupts() runs when the driver is unbound but not when
> the system shuts down: device_shutdown() invokes only the driver's
> .shutdown callback, which this driver does not implement.
> 
> The device is therefore left with its alarm interrupts enabled in
> hardware once Linux has stopped servicing them.
> 
> Add a .shutdown callback performing the same teardown, so the device is
> quiesced before control is handed on. The helper lives in the core
> module, so it is exported for the platform front-end. It skips a
> device described without an interrupt, which never set up interrupt
> handling.
> 
> Disabling the interrupts at shutdown is safe to have and not a must have
> requirement for shutdown.
> 
> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
> ---
>   drivers/iio/adc/versal-sysmon-core.c | 19 +++++++++++++++++++
>   drivers/iio/adc/versal-sysmon.c      |  6 ++++++
>   drivers/iio/adc/versal-sysmon.h      |  1 +
>   3 files changed, 26 insertions(+)
> 
> diff --git a/drivers/iio/adc/versal-sysmon-core.c b/drivers/iio/adc/versal-sysmon-core.c
> index 6595d07038c1..d39aaba9a8b6 100644
> --- a/drivers/iio/adc/versal-sysmon-core.c
> +++ b/drivers/iio/adc/versal-sysmon-core.c
> @@ -1000,6 +1000,8 @@ int devm_versal_sysmon_core_probe(struct device *dev, struct regmap *regmap)
>   	if (!indio_dev)
>   		return -ENOMEM;
>   
> +	dev_set_drvdata(dev, indio_dev);
> +
>   	sysmon = iio_priv(indio_dev);
>   	sysmon->regmap = regmap;
>   	sysmon->temp_oversampling = 1;
> @@ -1050,6 +1052,23 @@ int devm_versal_sysmon_core_probe(struct device *dev, struct regmap *regmap)
>   }
>   EXPORT_SYMBOL_NS_GPL(devm_versal_sysmon_core_probe, "VERSAL_SYSMON");
>   
> +/**
> + * versal_sysmon_shutdown() - Disable SysMon interrupts on system shutdown
> + * @dev: SysMon device
> + *
> + * Interrupt teardown is a devm action, which runs on driver unbind but not
> + * on system shutdown, so disable the interrupts here as well.
> + */
> +void versal_sysmon_shutdown(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct sysmon *sysmon = iio_priv(indio_dev);
> +
> +	if (sysmon->irq > 0)
> +		sysmon_disable_interrupts(sysmon);
> +}
> +EXPORT_SYMBOL_NS_GPL(versal_sysmon_shutdown, "VERSAL_SYSMON");
> +
>   MODULE_LICENSE("GPL");
>   MODULE_DESCRIPTION("AMD Versal SysMon Core Driver");
>   MODULE_AUTHOR("Salih Erim <salih.erim@amd.com>");
> diff --git a/drivers/iio/adc/versal-sysmon.c b/drivers/iio/adc/versal-sysmon.c
> index 529d0486c9f9..4d5e3d14cf15 100644
> --- a/drivers/iio/adc/versal-sysmon.c
> +++ b/drivers/iio/adc/versal-sysmon.c
> @@ -71,6 +71,11 @@ static int sysmon_platform_probe(struct platform_device *pdev)
>   	return devm_versal_sysmon_core_probe(dev, regmap);
>   }
>   
> +static void sysmon_platform_shutdown(struct platform_device *pdev)
> +{
> +	versal_sysmon_shutdown(&pdev->dev);
> +}
> +
>   static const struct of_device_id sysmon_of_match_table[] = {
>   	{ .compatible = "xlnx,versal-sysmon" },
>   	{ }
> @@ -79,6 +84,7 @@ MODULE_DEVICE_TABLE(of, sysmon_of_match_table);
>   
>   static struct platform_driver sysmon_platform_driver = {
>   	.probe = sysmon_platform_probe,
> +	.shutdown = sysmon_platform_shutdown,
>   	.driver = {
>   		.name = "versal-sysmon",
>   		.of_match_table = sysmon_of_match_table,
> diff --git a/drivers/iio/adc/versal-sysmon.h b/drivers/iio/adc/versal-sysmon.h
> index a1ac3289719c..a21dacc13471 100644
> --- a/drivers/iio/adc/versal-sysmon.h
> +++ b/drivers/iio/adc/versal-sysmon.h
> @@ -122,5 +122,6 @@ struct sysmon {
>   };
>   
>   int devm_versal_sysmon_core_probe(struct device *dev, struct regmap *regmap);
> +void versal_sysmon_shutdown(struct device *dev);
>   
>   #endif /* _VERSAL_SYSMON_H_ */

Change looks good to me.

Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>

Regards,
Prasanna Kumar

  reply	other threads:[~2026-11-03  7:07 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-02 12:21 [PATCH 0/6] iio: adc: versal-sysmon: Add OT alarm, shutdown and thermal zone support Amit Kumar Mahapatra
2026-11-02 12:21 ` [PATCH 1/6] iio: adc: versal-sysmon: fix race in interrupt teardown Amit Kumar Mahapatra
2026-11-03  7:05   ` Prasanna Kumar T S M
2026-11-02 12:21 ` [PATCH 2/6] iio: adc: versal-sysmon: validate temperature hysteresis Amit Kumar Mahapatra
2026-11-03 10:08   ` Andy Shevchenko
2026-11-02 12:21 ` [PATCH 3/6] iio: adc: versal-sysmon: disable interrupts on shutdown Amit Kumar Mahapatra
2026-11-03  7:07   ` Prasanna Kumar T S M [this message]
2026-11-03 10:10   ` Andy Shevchenko
2026-11-02 12:21 ` [PATCH 4/6] iio: adc: versal-sysmon: add over-temperature alarm events Amit Kumar Mahapatra
2026-11-02 12:21 ` [PATCH 5/6] arm64: versal-net: Add SysMon and thermal zone Amit Kumar Mahapatra
2026-11-02 14:53   ` Michal Simek
2026-11-02 12:21 ` [PATCH 6/6] MAINTAINERS: update Versal SysMon maintainers Amit Kumar Mahapatra
2026-11-02 12:53   ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4f330292-0fda-472b-8302-75ed5f6725eb@linux.microsoft.com \
    --to=ptsm@linux.microsoft.com \
    --cc=amit.kumar-mahapatra@amd.com \
    --cc=amitrkcian2002@gmail.com \
    --cc=andy@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=nuno.sa@analog.com \
    --cc=robh@kernel.org \
    --cc=sai.krishna.potthuri@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®