[PATCH 0/2] USB Storage quirk for SMI SM3350

[PATCH 0/2] USB Storage quirk for SMI SM3350

[Icenowy Zheng]

SMI SM3350 UFS-USB bridge controller cannot handle REQUEST SENSE command
with long sense (96-bytes) well, and will even trap the controller into
a state that refuses to do read/write command.

Currently Linux uncondintionally set US_FL_SANE_SENSE for devices
claiming SPC3+, which makes simply add US_FL_BAD_SENSE for SM3350 fail
(as it claims SPC4).

Fix this conflicting quirk issue, and add the quirk for SM3350.

Icenowy Zheng (2):
  USB: storage: don't insert sane sense for SPC3+ when bad sense
    specified
  USB: storage: add quirk for SMI SM3350

 drivers/usb/storage/scsiglue.c     |  3 ++-
 drivers/usb/storage/unusual_devs.h | 12 ++++++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)

-- 
2.18.1

[PATCH 1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified

[Icenowy Zheng]

Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).

Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 drivers/usb/storage/scsiglue.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index fde2e71a6ade..699fe9557127 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device *sdev)
 			sdev->try_rc_10_first = 1;
 
 		/* assume SPC3 or latter devices support sense size > 18 */
-		if (sdev->scsi_level > SCSI_SPC_2)
+		if (sdev->scsi_level > SCSI_SPC_2 &&
+		    !(us->fflags & US_FL_BAD_SENSE))
 			us->fflags |= US_FL_SANE_SENSE;
 
 		/*
-- 
2.18.1

Re: [PATCH 1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified

[Icenowy Zheng]

在 2018-12-27四的 22:34 +0800，Icenowy Zheng写道：
> Currently the code will set US_FL_SANE_SENSE flag unconditionally if
> device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
> prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
> which claims SPC4, will show strange behavior with 96-byte sense
> (put the chip into a wrong state that cannot read/write anything).
> 
> Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE
> on
> SPC4+ devices.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---

I forgot to:

Cc: stable@vger.kernel.org

>  drivers/usb/storage/scsiglue.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/storage/scsiglue.c
> b/drivers/usb/storage/scsiglue.c
> index fde2e71a6ade..699fe9557127 100644
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device
> *sdev)
>  			sdev->try_rc_10_first = 1;
>  
>  		/* assume SPC3 or latter devices support sense size >
> 18 */
> -		if (sdev->scsi_level > SCSI_SPC_2)
> +		if (sdev->scsi_level > SCSI_SPC_2 &&
> +		    !(us->fflags & US_FL_BAD_SENSE))
>  			us->fflags |= US_FL_SANE_SENSE;
>  
>  		/*

Re: [PATCH 1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified

[Alan Stern]

On Thu, 27 Dec 2018, Icenowy Zheng wrote:

> Currently the code will set US_FL_SANE_SENSE flag unconditionally if
> device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
> prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
> which claims SPC4, will show strange behavior with 96-byte sense
> (put the chip into a wrong state that cannot read/write anything).
> 
> Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
> SPC4+ devices.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
>  drivers/usb/storage/scsiglue.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
> index fde2e71a6ade..699fe9557127 100644
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device *sdev)
>  			sdev->try_rc_10_first = 1;
>  
>  		/* assume SPC3 or latter devices support sense size > 18 */
> -		if (sdev->scsi_level > SCSI_SPC_2)
> +		if (sdev->scsi_level > SCSI_SPC_2 &&
> +		    !(us->fflags & US_FL_BAD_SENSE))
>  			us->fflags |= US_FL_SANE_SENSE;

Please update the comment so that it matches the new code.

Alan Stern

[PATCH 2/2] USB: storage: add quirk for SMI SM3350

[Icenowy Zheng]

The SMI SM3350 USB-UFS bridge controller cannot handle long sense request
correctly and will make the chip refuse to do read/write when requested
long sense.

Add a bad sense quirk for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 drivers/usb/storage/unusual_devs.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index f7f83b21dc74..ea0d27a94afe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1265,6 +1265,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/*
+ * Reported by Icenowy Zheng <icenowy@aosc.io>
+ * The SMI SM3350 USB-UFS bridge controller will enter a wrong state
+ * that do not process read/write command if a long sense is requested,
+ * so force to use 18-byte sense.
+ */
+UNUSUAL_DEV(  0x090c, 0x3350, 0x0000, 0xffff,
+		"SMI",
+		"SM3350 UFS-to-USB-Mass-Storage bridge",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_BAD_SENSE ),
+
 /*
  * Reported by Paul Hartman <paul.hartman+linux@gmail.com>
  * This card reader returns "Illegal Request, Logical Block Address
-- 
2.18.1

Re: [PATCH 2/2] USB: storage: add quirk for SMI SM3350

[Icenowy Zheng]

在 2018-12-27四的 22:34 +0800，Icenowy Zheng写道：
> The SMI SM3350 USB-UFS bridge controller cannot handle long sense
> request
> correctly and will make the chip refuse to do read/write when
> requested
> long sense.
> 
> Add a bad sense quirk for it.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---

I forgot to:

Cc: stable@vger.kernel.org

>  drivers/usb/storage/unusual_devs.h | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/drivers/usb/storage/unusual_devs.h
> b/drivers/usb/storage/unusual_devs.h
> index f7f83b21dc74..ea0d27a94afe 100644
> --- a/drivers/usb/storage/unusual_devs.h
> +++ b/drivers/usb/storage/unusual_devs.h
> @@ -1265,6 +1265,18 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
>  		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
>  		US_FL_FIX_CAPACITY ),
>  
> +/*
> + * Reported by Icenowy Zheng <icenowy@aosc.io>
> + * The SMI SM3350 USB-UFS bridge controller will enter a wrong state
> + * that do not process read/write command if a long sense is
> requested,
> + * so force to use 18-byte sense.
> + */
> +UNUSUAL_DEV(  0x090c, 0x3350, 0x0000, 0xffff,
> +		"SMI",
> +		"SM3350 UFS-to-USB-Mass-Storage bridge",
> +		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
> +		US_FL_BAD_SENSE ),
> +
>  /*
>   * Reported by Paul Hartman <paul.hartman+linux@gmail.com>
>   * This card reader returns "Illegal Request, Logical Block Address