mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
To: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/3] media: i2c: og0ve1b: Introduce per-sensor data structure
Date: Thu, 23 Jul 2026 16:48:19 +0300	[thread overview]
Message-ID: <4f420ef4-b204-4d2c-bbc8-f2a2ade494d2@linaro.org> (raw)
In-Reply-To: <20260708-og0va1b-v3-2-de8e44455a42@oss.qualcomm.com>

Hi Wenmeng.

On 7/8/26 17:33, Wenmeng Liu wrote:
> Refactor the driver to separate sensor-specific data from the common
> driver code. Introduce a sensor_data structure, populated through
> i2c_get_match_data(), to hold the chip ID, MCLK frequency, link
> frequencies and supported modes.
> 
> Test pattern programming is described by a per-sensor callback, and each
> mode stores its media bus format code (rather than a bits-per-pixel
> value) so that sensors with a different output format can be supported.
> 
> Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
> ---
>   drivers/media/i2c/og0ve1b.c | 99 ++++++++++++++++++++++++++++++++-------------
>   1 file changed, 71 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/media/i2c/og0ve1b.c b/drivers/media/i2c/og0ve1b.c
> index 84a28cdcade10f8fbcf945999e88f84641b9bc0d..041342fbe3c822400388f58a03e6057e186f060f 100644
> --- a/drivers/media/i2c/og0ve1b.c
> +++ b/drivers/media/i2c/og0ve1b.c
> @@ -65,11 +65,23 @@ struct og0ve1b_mode {
>   	u32 height;	/* Frame height in pixels */
>   	u32 hts;	/* Horizontal timing size */
>   	u32 vts;	/* Default vertical timing size */
> -	u32 bpp;	/* Bits per pixel */
> +	u32 code;	/* MEDIA_BUS_FMT code */
>   
>   	const struct og0ve1b_reg_list reg_list;	/* Sensor register setting */
>   };
>   
> +struct og0ve1b;
> +
> +struct og0ve1b_sensor_data {
> +	u64 chip_id;
> +	unsigned long mclk_freq;
> +	int (*enable_test_pattern)(struct og0ve1b *og0ve1b, u32 pattern);
> +	const s64 *link_freq_menu;
> +	int num_link_freqs;
> +	const struct og0ve1b_mode *modes;
> +	int num_modes;
> +};
> +
>   static const char * const og0ve1b_test_pattern_menu[] = {
>   	"Disabled",
>   	"Vertical Colour Bars",
> @@ -99,6 +111,8 @@ struct og0ve1b {
>   
>   	/* Saved register value */
>   	u64 pre_isp;
> +
> +	const struct og0ve1b_sensor_data *data;
>   };
>   
>   static const struct cci_reg_sequence og0ve1b_640x480_120fps_mode[] = {
> @@ -247,13 +261,13 @@ static const struct cci_reg_sequence og0ve1b_640x480_120fps_mode[] = {
>   	{ CCI_REG8(0x3f47), 0x35 },
>   };
>   
> -static const struct og0ve1b_mode supported_modes[] = {
> +static const struct og0ve1b_mode og0ve1b_supported_modes[] = {
>   	{
>   		.width = 640,
>   		.height = 480,
>   		.hts = 792,
>   		.vts = 568,
> -		.bpp = 8,
> +		.code = MEDIA_BUS_FMT_Y8_1X8,
>   		.reg_list = {
>   			.regs = og0ve1b_640x480_120fps_mode,
>   			.num_regs = ARRAY_SIZE(og0ve1b_640x480_120fps_mode),
> @@ -273,11 +287,21 @@ static int og0ve1b_enable_test_pattern(struct og0ve1b *og0ve1b, u32 pattern)
>   	return cci_write(og0ve1b->regmap, OG0VE1B_REG_PRE_ISP, val, NULL);
>   }
>   
> +static const struct og0ve1b_sensor_data og0ve1b_data = {
> +	.chip_id = OG0VE1B_CHIP_ID,
> +	.mclk_freq = OG0VE1B_MCLK_FREQ_24MHZ,
> +	.enable_test_pattern = og0ve1b_enable_test_pattern,
> +	.link_freq_menu = og0ve1b_link_freq_menu,
> +	.num_link_freqs = ARRAY_SIZE(og0ve1b_link_freq_menu),
> +	.modes = og0ve1b_supported_modes,
> +	.num_modes = ARRAY_SIZE(og0ve1b_supported_modes),
> +};
> +
>   static int og0ve1b_set_ctrl(struct v4l2_ctrl *ctrl)
>   {
>   	struct og0ve1b *og0ve1b = container_of(ctrl->handler, struct og0ve1b,
>   					       ctrl_handler);
> -	const struct og0ve1b_mode *mode = &supported_modes[0];
> +	const struct og0ve1b_mode *mode = &og0ve1b->data->modes[0];
>   	s64 exposure_max;
>   	int ret;
>   
> @@ -314,7 +338,7 @@ static int og0ve1b_set_ctrl(struct v4l2_ctrl *ctrl)
>   				ctrl->val + mode->height, NULL);
>   		break;
>   	case V4L2_CID_TEST_PATTERN:
> -		ret = og0ve1b_enable_test_pattern(og0ve1b, ctrl->val);
> +		ret = og0ve1b->data->enable_test_pattern(og0ve1b, ctrl->val);
>   		break;
>   	default:
>   		ret = -EINVAL;
> @@ -330,10 +354,19 @@ static const struct v4l2_ctrl_ops og0ve1b_ctrl_ops = {
>   	.s_ctrl = og0ve1b_set_ctrl,
>   };
>   
> +static s64 og0ve1b_pixel_rate(const struct og0ve1b_sensor_data *data)
> +{
> +	const struct og0ve1b_mode *mode = &data->modes[0];
> +	unsigned int bpp = mode->code == MEDIA_BUS_FMT_Y8_1X8 ? 8 : 10;
> +
> +	return data->link_freq_menu[0] / bpp;
> +}
> +
>   static int og0ve1b_init_controls(struct og0ve1b *og0ve1b)
>   {
>   	struct v4l2_ctrl_handler *ctrl_hdlr = &og0ve1b->ctrl_handler;
> -	const struct og0ve1b_mode *mode = &supported_modes[0];
> +	const struct og0ve1b_mode *mode = &og0ve1b->data->modes[0];
> +	const struct og0ve1b_sensor_data *data = og0ve1b->data;
>   	s64 exposure_max, pixel_rate, h_blank, v_blank;
>   	struct v4l2_fwnode_device_properties props;
>   	struct v4l2_ctrl *ctrl;
> @@ -343,12 +376,12 @@ static int og0ve1b_init_controls(struct og0ve1b *og0ve1b)
>   
>   	ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr, &og0ve1b_ctrl_ops,
>   				      V4L2_CID_LINK_FREQ,
> -				      ARRAY_SIZE(og0ve1b_link_freq_menu) - 1,
> -				      0, og0ve1b_link_freq_menu);
> +				      data->num_link_freqs - 1,
> +				      0, data->link_freq_menu);
>   	if (ctrl)
>   		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
>   
> -	pixel_rate = og0ve1b_link_freq_menu[0] / mode->bpp;
> +	pixel_rate = og0ve1b_pixel_rate(data);
>   	v4l2_ctrl_new_std(ctrl_hdlr, &og0ve1b_ctrl_ops, V4L2_CID_PIXEL_RATE,
>   			  0, pixel_rate, 1, pixel_rate);
>   
> @@ -407,7 +440,7 @@ static int og0ve1b_init_controls(struct og0ve1b *og0ve1b)
>   static void og0ve1b_update_pad_format(const struct og0ve1b_mode *mode,
>   				      struct v4l2_mbus_framefmt *fmt)
>   {
> -	fmt->code = MEDIA_BUS_FMT_Y8_1X8;
> +	fmt->code = mode->code;
>   	fmt->width = mode->width;
>   	fmt->height = mode->height;
>   	fmt->field = V4L2_FIELD_NONE;
> @@ -421,8 +454,8 @@ static int og0ve1b_enable_streams(struct v4l2_subdev *sd,
>   				  struct v4l2_subdev_state *state, u32 pad,
>   				  u64 streams_mask)
>   {
> -	const struct og0ve1b_reg_list *reg_list = &supported_modes[0].reg_list;
>   	struct og0ve1b *og0ve1b = to_og0ve1b(sd);
> +	const struct og0ve1b_reg_list *reg_list = &og0ve1b->data->modes[0].reg_list;
>   	int ret;
>   
>   	ret = pm_runtime_resume_and_get(og0ve1b->dev);
> @@ -484,13 +517,14 @@ static int og0ve1b_set_pad_format(struct v4l2_subdev *sd,
>   				  struct v4l2_subdev_state *state,
>   				  struct v4l2_subdev_format *fmt)
>   {
> +	struct og0ve1b *og0ve1b = to_og0ve1b(sd);
>   	struct v4l2_mbus_framefmt *format;
>   	const struct og0ve1b_mode *mode;
>   
>   	format = v4l2_subdev_state_get_format(state, 0);
>   
> -	mode = v4l2_find_nearest_size(supported_modes,
> -				      ARRAY_SIZE(supported_modes),
> +	mode = v4l2_find_nearest_size(og0ve1b->data->modes,
> +				      og0ve1b->data->num_modes,
>   				      width, height,
>   				      fmt->format.width,
>   				      fmt->format.height);
> @@ -505,10 +539,12 @@ static int og0ve1b_enum_mbus_code(struct v4l2_subdev *sd,
>   				  struct v4l2_subdev_state *sd_state,
>   				  struct v4l2_subdev_mbus_code_enum *code)
>   {
> +	struct og0ve1b *og0ve1b = to_og0ve1b(sd);
> +
>   	if (code->index > 0)
>   		return -EINVAL;
>   
> -	code->code = MEDIA_BUS_FMT_Y8_1X8;
> +	code->code = og0ve1b->data->modes[0].code;
>   
>   	return 0;
>   }
> @@ -517,15 +553,18 @@ static int og0ve1b_enum_frame_size(struct v4l2_subdev *sd,
>   				   struct v4l2_subdev_state *sd_state,
>   				   struct v4l2_subdev_frame_size_enum *fse)
>   {
> -	if (fse->index >= ARRAY_SIZE(supported_modes))
> +	struct og0ve1b *og0ve1b = to_og0ve1b(sd);
> +	const struct og0ve1b_sensor_data *data = og0ve1b->data;
> +
> +	if (fse->index >= data->num_modes)
>   		return -EINVAL;
>   
> -	if (fse->code != MEDIA_BUS_FMT_Y8_1X8)
> +	if (fse->code != data->modes[fse->index].code)
>   		return -EINVAL;
>   
> -	fse->min_width = supported_modes[fse->index].width;
> +	fse->min_width = data->modes[fse->index].width;
>   	fse->max_width = fse->min_width;
> -	fse->min_height = supported_modes[fse->index].height;
> +	fse->min_height = data->modes[fse->index].height;
>   	fse->max_height = fse->min_height;
>   
>   	return 0;
> @@ -534,13 +573,14 @@ static int og0ve1b_enum_frame_size(struct v4l2_subdev *sd,
>   static int og0ve1b_init_state(struct v4l2_subdev *sd,
>   			      struct v4l2_subdev_state *state)
>   {
> +	const struct og0ve1b_mode *mode = &to_og0ve1b(sd)->data->modes[0];
>   	struct v4l2_subdev_format fmt = {
>   		.which = V4L2_SUBDEV_FORMAT_TRY,
>   		.pad = 0,
>   		.format = {
> -			.code = MEDIA_BUS_FMT_Y8_1X8,
> -			.width = supported_modes[0].width,
> -			.height = supported_modes[0].height,
> +			.code = mode->code,
> +			.width = mode->width,
> +			.height = mode->height,
>   		},
>   	};
>   
> @@ -586,9 +626,9 @@ static int og0ve1b_identify_sensor(struct og0ve1b *og0ve1b)
>   		return ret;
>   	}
>   
> -	if (val != OG0VE1B_CHIP_ID) {
> -		dev_err(og0ve1b->dev, "chip id mismatch: %x!=%llx\n",
> -			OG0VE1B_CHIP_ID, val);
> +	if (val != og0ve1b->data->chip_id) {
> +		dev_err(og0ve1b->dev, "chip id mismatch: %llx!=%llx\n",
> +			og0ve1b->data->chip_id, val);
>   		return -ENODEV;
>   	}
>   
> @@ -624,8 +664,8 @@ static int og0ve1b_check_hwcfg(struct og0ve1b *og0ve1b)
>   	ret = v4l2_link_freq_to_bitmap(og0ve1b->dev,
>   				       bus_cfg.link_frequencies,
>   				       bus_cfg.nr_of_link_frequencies,
> -				       og0ve1b_link_freq_menu,
> -				       ARRAY_SIZE(og0ve1b_link_freq_menu),
> +				       og0ve1b->data->link_freq_menu,
> +				       og0ve1b->data->num_link_freqs,
>   				       &freq_bitmap);
>   
>   	v4l2_fwnode_endpoint_free(&bus_cfg);
> @@ -686,6 +726,9 @@ static int og0ve1b_probe(struct i2c_client *client)
>   		return -ENOMEM;
>   
>   	og0ve1b->dev = &client->dev;
> +	og0ve1b->data = i2c_get_match_data(client);
> +	if (!og0ve1b->data)
> +		return -ENODEV;
>   
>   	v4l2_i2c_subdev_init(&og0ve1b->sd, client, &og0ve1b_subdev_ops);
>   
> @@ -700,7 +743,7 @@ static int og0ve1b_probe(struct i2c_client *client)
>   				     "failed to get XVCLK clock\n");
>   
>   	freq = clk_get_rate(og0ve1b->xvclk);
> -	if (freq && freq != OG0VE1B_MCLK_FREQ_24MHZ)
> +	if (freq && freq != og0ve1b->data->mclk_freq)
>   		return dev_err_probe(og0ve1b->dev, -EINVAL,
>   				     "XVCLK clock frequency %lu is not supported\n",
>   				     freq);
> @@ -819,7 +862,7 @@ static const struct dev_pm_ops og0ve1b_pm_ops = {
>   };
>   
>   static const struct of_device_id og0ve1b_of_match[] = {
> -	{ .compatible = "ovti,og0ve1b" },
> +	{ .compatible = "ovti,og0ve1b", .data = &og0ve1b_data },
>   	{ /* sentinel */ }
>   };
>   MODULE_DEVICE_TABLE(of, og0ve1b_of_match);
> 

I'm sorry for a delay in completion of my review and testing.
The change is good in my opinion:

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>

-- 
Best wishes,
Vladimir

  reply	other threads:[~2026-07-23 13:48 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-08 14:33 [PATCH v3 0/3] media: i2c: Add OmniVision OG0VA1B camera sensor driver Wenmeng Liu
2026-07-08 14:33 ` [PATCH v3 1/3] dt-bindings: media: i2c: og0ve1b: Add OmniVision OG0VA1B camera sensor Wenmeng Liu
2026-07-08 14:33 ` [PATCH v3 2/3] media: i2c: og0ve1b: Introduce per-sensor data structure Wenmeng Liu
2026-07-23 13:48   ` Vladimir Zapolskiy [this message]
2026-07-08 14:33 ` [PATCH v3 3/3] media: i2c: og0ve1b: Add support for OmniVision OG0VA1B Wenmeng Liu
2026-07-23 13:51   ` Vladimir Zapolskiy
2026-07-24 13:35   ` Vladimir Zapolskiy
2026-07-27  9:38     ` Wenmeng Liu
2026-07-27 19:05       ` Vladimir Zapolskiy
2026-07-23  2:41 ` [PATCH v3 0/3] media: i2c: Add OmniVision OG0VA1B camera sensor driver Wenmeng Liu
2026-07-28  8:27   ` [PATCH v3 0/3] media: i2c: Add OmniVision OG0VA1B camera sensor driver - IPU and ACPI Alain Cousinie
2026-07-29  2:32     ` Wenmeng Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4f420ef4-b204-4d2c-bbc8-f2a2ade494d2@linaro.org \
    --to=vladimir.zapolskiy@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=wenmeng.liu@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®