Re: [PATCH v3 0/3] media: i2c: Add OmniVision OG0VA1B camera sensor driver

[Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>]

On 7/8/2026 10:33 PM, Wenmeng Liu wrote:
> Add OmniVision OG0VA1B driver support. The OmniVision OG0VA1B is a
> 1/10-inch monochrome CMOS VGA image sensor. It outputs 10-bit raw (Y10)
> frames at up to 640x480 resolution over a single-lane MIPI CSI-2
> interface and is controlled via an I2C-compatible SCCB bus.
> 
> This driver has been verified(include tpg) on the Purwa EVK.
> 
> Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
> ---
> Changes in v3:
> - Generalise the binding title and description for both sensors. -- Vladimir
> - Keep the cached pre_isp read so the OG0VE1B test pattern still works,
> select it via a per-sensor callback. -- Bryan, Vladimir
> - Rename the "sensor" field to "data", drop bpp (derive from code) and
> add og0ve1b_pixel_rate(). -- Vladimir
> - Sort defines, rename the shared CHIP_ID reg to OG0V_ and order
> og0va1b_data first. -- Vladimir
> - Expose all four OG0VA1B test patterns instead of one.
> - Link to v2: https://lore.kernel.org/r/20260702-og0va1b-v2-0-0071442caa2a@oss.qualcomm.com
> 
> Changes in v2:
> - Integrate OG0VA1B into the existing og0ve1b driver and binding
> instead. -- Vladimir
> - Link to v1: https://lore.kernel.org/r/20260618-og0va1b-v1-0-dda71bb83009@oss.qualcomm.com
> 
> ---
> Wenmeng Liu (3):
>        dt-bindings: media: i2c: og0ve1b: Add OmniVision OG0VA1B camera sensor
>        media: i2c: og0ve1b: Introduce per-sensor data structure
>        media: i2c: og0ve1b: Add support for OmniVision OG0VA1B
> 
>   .../bindings/media/i2c/ovti,og0ve1b.yaml           |  15 +-
>   drivers/media/i2c/og0ve1b.c                        | 375 ++++++++++++++++++---
>   2 files changed, 344 insertions(+), 46 deletions(-)
> ---
> base-commit: 5c73cd9f0819c1c44e373e3dabb68318b1de1a12
> change-id: 20260618-og0va1b-55bbf3cabb0e
> 
> Best regards,


Gentle reminder to review this patchset.

Thanks,
Wenmeng