From: Anton Altaparmakov <aia21@cam.ac.uk>
To: linux-kernel@vger.kernel.org
Subject: sorted - was: How to add a drive to DMA black list?
Date: Fri, 17 Nov 2000 01:19:55 +0000 [thread overview]
Message-ID: <5.0.0.25.2.20001117011804.00a5eb50@pop.cus.cam.ac.uk> (raw)
In-Reply-To: <5.0.0.25.2.20001116182436.00ab3160@pop.cus.cam.ac.uk>
The drive was being added to the black lists fine it's just that I had PIIX
tuning enabled which caused the good/bad dma tables check to be bypassed
completely. - So disabling PIIX tuning made my PC boot fine.
Regards,
Anton
At 00:13 17/11/2000, Anton Altaparmakov wrote:
>Hello all,
>
>I have an ide hard drive that misbehaves when the option "enable DMA at
>boot time" (2.4.x kernel) is selected (this is on a on board ide
>controller). But on the other hand I have a Promise Ultra-ATA-100
>controller with an IBM ATA-100 drive that, according to the menuconfig
>information and the information at the top of the driver requires the
>"enable DMA at boot time" feature to be selected.
>
>I tried adding the string that is output for the bad drive by hdparm -i
>into drivers/ide/ide-dma.c::drive_blacklist and
>drivers/ide/ide-dma.c::bad_dma_drives but the kernel still says that it is
>using DMA and the kernel hangs after displaying:
>
>PIIX: chipset revision 2
>PIIX: not 100% native mode: will probe irqs later
>[snip]
>PDC20267: IDE controller on PCI bus 00 dev 98
>PDC20267: chipset revision 2
>PDC20267: not 100% native mode: will probe irqs later
>PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
>[snip]
>hdc: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive
>hde: IBM-DTLA-307045, ATA DISK drive
>[snip]
>hdc: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=2477/16/63, DMA
>hde: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63. UDMA(100)
>Partition check:
> hda: hda1 hda2 < hda5 >
> hdc:hdc: timout waiting for DMA
>ide_dmaproc: chipset supported ide_dma_timeout func only: 14
>hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
>_
>Dead.
>
>What should I do? Thanks in advance,
>
>Anton
>
>--
> "Education is what remains after one has forgotten everything he
> learned in school." - Albert Einstein
>--
>Anton Altaparmakov Voice: +44-(0)1223-333541(lab) /
>+44-(0)7712-632205(mobile)
>Christ's College eMail: AntonA@bigfoot.com / aia21@cam.ac.uk
>Cambridge CB2 3BU ICQ: 8561279
>United Kingdom WWW: http://www-stu.christs.cam.ac.uk/~aia21/
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>Please read the FAQ at http://www.tux.org/lkml/
--
"Education is what remains after one has forgotten everything he
learned in school." - Albert Einstein
--
Anton Altaparmakov Voice: +44-(0)1223-333541(lab) / +44-(0)7712-632205(mobile)
Christ's College eMail: AntonA@bigfoot.com / aia21@cam.ac.uk
Cambridge CB2 3BU ICQ: 8561279
United Kingdom WWW: http://www-stu.christs.cam.ac.uk/~aia21/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-11-17 1:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-17 0:13 Anton Altaparmakov
2000-11-17 1:19 ` Anton Altaparmakov [this message]
2000-11-17 1:26 ` sorted - was: " Andre Hedrick
2000-11-17 10:55 ` Alan Cox
2000-11-17 19:12 ` Andre Hedrick
2000-11-17 1:34 ` Anton Altaparmakov
2000-11-17 1:41 ` Andre Hedrick
2000-11-17 10:52 ` Alan Cox
2000-11-17 11:03 ` Anton Altaparmakov
2000-11-17 11:26 ` Alan Cox
2000-11-19 16:50 ` Anton Altaparmakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5.0.0.25.2.20001117011804.00a5eb50@pop.cus.cam.ac.uk \
--to=aia21@cam.ac.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®