From: Andre Hedrick <andre@linux-ide.org>
To: Anton Altaparmakov <aia21@cam.ac.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: sorted - was: How to add a drive to DMA black list?
Date: Thu, 16 Nov 2000 17:26:13 -0800 (PST) [thread overview]
Message-ID: <Pine.LNX.4.10.10011161725300.6910-100000@master.linux-ide.org> (raw)
In-Reply-To: <5.0.0.25.2.20001117011804.00a5eb50@pop.cus.cam.ac.uk>
Then I need to fix that to prevent the bypass that should not happen.
On Fri, 17 Nov 2000, Anton Altaparmakov wrote:
> The drive was being added to the black lists fine it's just that I had PIIX
> tuning enabled which caused the good/bad dma tables check to be bypassed
> completely. - So disabling PIIX tuning made my PC boot fine.
>
> Regards,
>
> Anton
>
> At 00:13 17/11/2000, Anton Altaparmakov wrote:
> >Hello all,
> >
> >I have an ide hard drive that misbehaves when the option "enable DMA at
> >boot time" (2.4.x kernel) is selected (this is on a on board ide
> >controller). But on the other hand I have a Promise Ultra-ATA-100
> >controller with an IBM ATA-100 drive that, according to the menuconfig
> >information and the information at the top of the driver requires the
> >"enable DMA at boot time" feature to be selected.
> >
> >I tried adding the string that is output for the bad drive by hdparm -i
> >into drivers/ide/ide-dma.c::drive_blacklist and
> >drivers/ide/ide-dma.c::bad_dma_drives but the kernel still says that it is
> >using DMA and the kernel hangs after displaying:
> >
> >PIIX: chipset revision 2
> >PIIX: not 100% native mode: will probe irqs later
> >[snip]
> >PDC20267: IDE controller on PCI bus 00 dev 98
> >PDC20267: chipset revision 2
> >PDC20267: not 100% native mode: will probe irqs later
> >PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
> >[snip]
> >hdc: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive
> >hde: IBM-DTLA-307045, ATA DISK drive
> >[snip]
> >hdc: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=2477/16/63, DMA
> >hde: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63. UDMA(100)
> >Partition check:
> > hda: hda1 hda2 < hda5 >
> > hdc:hdc: timout waiting for DMA
> >ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> >hdc: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
> >_
> >Dead.
> >
> >What should I do? Thanks in advance,
> >
> >Anton
> >
> >--
> > "Education is what remains after one has forgotten everything he
> > learned in school." - Albert Einstein
> >--
> >Anton Altaparmakov Voice: +44-(0)1223-333541(lab) /
> >+44-(0)7712-632205(mobile)
> >Christ's College eMail: AntonA@bigfoot.com / aia21@cam.ac.uk
> >Cambridge CB2 3BU ICQ: 8561279
> >United Kingdom WWW: http://www-stu.christs.cam.ac.uk/~aia21/
> >
> >-
> >To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >the body of a message to majordomo@vger.kernel.org
> >Please read the FAQ at http://www.tux.org/lkml/
>
> --
> "Education is what remains after one has forgotten everything he
> learned in school." - Albert Einstein
> --
> Anton Altaparmakov Voice: +44-(0)1223-333541(lab) / +44-(0)7712-632205(mobile)
> Christ's College eMail: AntonA@bigfoot.com / aia21@cam.ac.uk
> Cambridge CB2 3BU ICQ: 8561279
> United Kingdom WWW: http://www-stu.christs.cam.ac.uk/~aia21/
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
CTO Timpanogas Research Group
EVP Linux Development, TRG
Linux ATA Development
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-11-17 1:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-11-17 0:13 Anton Altaparmakov
2000-11-17 1:19 ` sorted - was: " Anton Altaparmakov
2000-11-17 1:26 ` Andre Hedrick [this message]
2000-11-17 10:55 ` Alan Cox
2000-11-17 19:12 ` Andre Hedrick
2000-11-17 1:34 ` Anton Altaparmakov
2000-11-17 1:41 ` Andre Hedrick
2000-11-17 10:52 ` Alan Cox
2000-11-17 11:03 ` Anton Altaparmakov
2000-11-17 11:26 ` Alan Cox
2000-11-19 16:50 ` Anton Altaparmakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.10.10011161725300.6910-100000@master.linux-ide.org \
--to=andre@linux-ide.org \
--cc=aia21@cam.ac.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®