* Silly Question
@ 2001-01-24 20:44 Isabelle, Francois
2001-01-24 21:09 ` Richard B. Johnson
0 siblings, 1 reply; 2+ messages in thread
From: Isabelle, Francois @ 2001-01-24 20:44 UTC (permalink / raw)
To: Linux-Kernel@Vger. Kernel. Org. (E-mail); +Cc: 'Per Hedeland' (E-mail)
There is something I try to do using Linux and I think you may have a clue:
I want to use the external loopback of my ethernet interface to test it. I
want the data to actually go through the cable and I don't want internal
logic to bypass this process.
There is only one interface available, so I can't use swapped routing as
explained here:
http://www.tux.org/hypermail/linux-kernel/1999week21/0294.html.
I'm not sure if this is kernel specific or if some commands may override
default routing behavior.
Any ideas?
Francois Isabelle
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Silly Question
2001-01-24 20:44 Silly Question Isabelle, Francois
@ 2001-01-24 21:09 ` Richard B. Johnson
0 siblings, 0 replies; 2+ messages in thread
From: Richard B. Johnson @ 2001-01-24 21:09 UTC (permalink / raw)
To: Isabelle, Francois
Cc: Linux-Kernel@Vger. Kernel. Org. (E-mail),
'Per Hedeland' (E-mail)
On Wed, 24 Jan 2001, Isabelle, Francois wrote:
> There is something I try to do using Linux and I think you may have a clue:
>
> I want to use the external loopback of my ethernet interface to test it. I
> want the data to actually go through the cable and I don't want internal
> logic to bypass this process.
> There is only one interface available, so I can't use swapped routing as
> explained here:
[SNIPPED...]
If you set a SNIC (Serial Network Interface Chip) to loop-back, the
signal doesn't come in or go out the cable! In fact, initialization
procedures often require that the SNIC be put into loop-back so that
nothing is being received during the initialization process.
You just need another card for the single-machine loop-back testing
that you describe. FYI, you can get an idea of the underlying network
code speed by using the echo and sink port over lo. This uses all
the IP layers, but bypasses the Ethernet hardware.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.0 on an i686 machine (799.53 BogoMips).
"Memory is like gasoline. You use it up when you are running. Of
course you get it all back when you reboot..."; Actual explanation
obtained from the Micro$oft help desk.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-01-24 21:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-01-24 20:44 Silly Question Isabelle, Francois
2001-01-24 21:09 ` Richard B. Johnson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®