Re: [PATCH v2] arm64: dts: qcom: qcs615: Add QUPv3 configuration

[Krzysztof Kozlowski <krzk@kernel.org>]

On 28/10/2024 12:20, Viken Dadhaniya wrote:
> Add DT support for QUPv3 Serial Engines.
> 
> Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
> ---
> 
> Build Dependencies:
> 
> Base:
> https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-5-e37617e91c62@quicinc.com/
> https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-6-e37617e91c62@quicinc.com/
> 
> Clock: https://lore.kernel.org/linux-devicetree/20240920-qcs615-clock-driver-v2-3-2f6de44eb2aa@quicinc.com/
> ICC: https://lore.kernel.org/linux-devicetree/20240924143958.25-2-quic_rlaggysh@quicinc.com/
> Apps SMMU: https://lore.kernel.org/all/20241011063112.19087-1-quic_qqzhou@quicinc.com/
> 
> v1 -> v2:
> 
> - Add opp-shared property.
> - Use QCOM_ICC_TAG_ALWAYS flag in interconnect property.
> 
> v1 Link: https://lore.kernel.org/all/20241011103346.22925-1-quic_vdadhani@quicinc.com/
> ---
>  arch/arm64/boot/dts/qcom/qcs615.dtsi | 642 ++++++++++++++++++++++++++-
>  1 file changed, 638 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> index 865ead601f85..1d1cdf6f9a74 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include <dt-bindings/clock/qcom,qcs615-gcc.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
>  #include <dt-bindings/interconnect/qcom,icc.h>
>  #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -17,6 +18,21 @@
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	aliases {
> +		i2c1 = &i2c1;
> +		i2c2 = &i2c2;
> +		i2c3 = &i2c3;
> +		i2c4 = &i2c4;
> +		i2c5 = &i2c5;
> +		i2c6 = &i2c6;
> +		i2c7 = &i2c7;
> +		spi2 = &spi2;
> +		spi4 = &spi4;
> +		spi6 = &spi6;
> +		spi7 = &spi7;
> +		serial0 = &uart0;

Comments from v1 apply.

> +	};
> +
>  	cpus {
>  		#address-cells = <2>;
>  		#size-cells = <0>;
> @@ -296,6 +312,26 @@
>  		qcom,bcm-voters = <&apps_bcm_voter>;
>  	};
>  
> +	qup_opp_table: opp-table-qup {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-75000000 {
> +			opp-hz = /bits/ 64 <75000000>;
> +			required-opps = <&rpmhpd_opp_low_svs>;
> +		};
> +
> +		opp-100000000 {
> +			opp-hz = /bits/ 64 <100000000>;
> +			required-opps = <&rpmhpd_opp_svs>;
> +		};
> +
> +		opp-128000000 {
> +			opp-hz = /bits/ 64 <128000000>;
> +			required-opps = <&rpmhpd_opp_nom>;
> +		};
> +	};
> +
>  	psci {
>  		compatible = "arm,psci-1.0";
>  		method = "smc";
> @@ -392,6 +428,24 @@
>  			#size-cells = <1>;
>  		};
>  
> +		gpi_dma0: qcom,gpi-dma@800000  {

Nope. Don't post downstream code.

Best regards,
Krzysztof