Re: [PATCH 3/3] arm64: dts: qcom: lemans-sa8255p: add ethernet nodes

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 10/23/26 11:02 AM, Bartosz Golaszewski wrote:
> Add the ethernet nodes along with their serdes PHY nodes for the gearvm
> variant of the lemans ride board. Enable scmi7 and scmi8 to serve the
> EMACs.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi      |  28 +++
>  arch/arm64/boot/dts/qcom/lemans-sa8255p-ride.dts | 213 +++++++++++++++++++++++
>  2 files changed, 241 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
> index 4c155cbc79754af632848cd55b738e3ef0511cb5..c64cfd279af458e24fb48083ae549c96cfc07485 100644
> --- a/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
> +++ b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi
> @@ -58,6 +58,14 @@ &cpufreq_hw {
>  	clock-names = "xo", "alternate";
>  };
>  
> +&ethernet1 {
> +	compatible = "qcom,sa8255p-ethqos";
> +};
> +
> +&ethernet0 {
> +	compatible = "qcom,sa8255p-ethqos";
> +};

'0' < '1'


> +
>  &firmware {
>  	scm {
>  		memory-region = <&tz_ffi_mem>;
> @@ -3226,6 +3234,26 @@ cma: linux,cma {
>  	};
>  };
>  
> +&soc {
> +	serdes0: phy@8901000 {
> +		compatible = "qcom,sa8255p-dwmac-sgmii-phy";

Hmm.. I was hoping Shawn's DT reshuffling would land first

Are the PHYs hardwired? If so, you can move the phys= reference
here

Konrad