Re: [PATCH/RFT v2 15/17] usb: host: ohci-da8xx: Add devicetree bindings documentation

[David Lechner <david@lechnology.com>]

On 10/24/2016 11:46 AM, ahaslam@baylibre.com wrote:
> From: Axel Haslam <ahaslam@baylibre.com>
>
> This patch documents the device tree bindings required for
> the ohci controller found in TI da8xx family of SoC's
>
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
> ---
>  .../devicetree/bindings/usb/ohci-da8xx.txt         | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
> new file mode 100644
> index 0000000..4251c84
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt
> @@ -0,0 +1,39 @@
> +DA8XX USB OHCI controller
> +
> +Required properties:
> +
> + - compatible: Should be "ti,da830-ohci"
> + - reg:        Should contain one register range i.e. start and length
> + - interrupts: Description of the interrupt line
> + - phys:       Phandle for the PHY device
> + - phy-names:  Should be "usb-phy"
> +
> +Optional properties:
> + - vbus-supply: Regulator that controls vbus power


Isn't vbus-supply property required?

If it is really supposed to be optional, the ohci driver needs to use 
devm_regulator_get_optional() and handle the case when there is no 
regulator.

I don't see a problem with making it required though since one can just 
use a dummy supply if there is not a real one.

> +
> +Example for omap138-lck:
> +
> +vbus_fixed: fixed-regulator-vbus {
> +        compatible = "regulator-fixed";
> +        gpio = <&gpio 109 0>;
> +        oc-gpio = <&gpio 36 0>;
> +        regulator-boot-on;
> +        enable-active-high;
> +        regulator-name = "vbus";
> +        regulator-min-microvolt = <5000000>;
> +        regulator-max-microvolt = <5000000>;
> +};
> +
> +usb_phy: usb-phy {
> +        compatible = "ti,da830-usb-phy";
> +        #phy-cells = <1>;
> +        status = "disabled";

why disabled?

> +};
> +usb: usb@0225000 {
> +        compatible = "ti,da830-ohci";
> +        reg = <0x225000 0x1000>;
> +        interrupts = <59>;
> +        phys = <&usb_phy 1>;
> +        phy-names = "usb-phy";

missing vbus-supply property

> +        status = "disabled";

why disabled?

> +};
>