[PATCH v7] arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller

[PATCH v7] arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller

[Krishna Kurapati]

Enable OTG support for primary USB controller on EVK Platform. Add
HD3SS3220 Type-C port controller present between Type-C port and SoC
that provides role switch notifications to controller.

Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
Changes in v7:
- Renamed hd3ss3220@67 to usb-typec@67
- Compile tested since its only node name change

Link to v6:
https://lore.kernel.org/all/20251127073537.1218832-1-krishna.kurapati@oss.qualcomm.com/

Changes in v6:
- Renamed remote endpoints in controller node

Link to v5:
https://lore.kernel.org/all/20251125110420.2192971-1-krishna.kurapati@oss.qualcomm.com/

Changes in v5:
- Re-organised pmic gpio node to maintain alphanumeric order

Link to v4:
https://lore.kernel.org/all/20251102165126.2799143-1-krishna.kurapati@oss.qualcomm.com/

Changes in v4:
- Moved remote endpoints to SoC file.
- Renamed vbus regulator name.
- Moved usb-role-swich property to SoC file.

Link to v3:
https://lore.kernel.org/all/20251024182138.2744861-1-krishna.kurapati@oss.qualcomm.com/

Changes in v3:
- Moved "usb-role-switch" to lemans dtsi file
- Moved vbus supply to connector node

Link to v2:
https://lore.kernel.org/all/20251008180036.1770735-1-krishna.kurapati@oss.qualcomm.com/

Changes in v2:
- Removed redundant property of dr_mode setting.
- Added power-role property in connector node.

Link to v1:
https://lore.kernel.org/all/20251002172946.589061-1-krishna.kurapati@oss.qualcomm.com/

 arch/arm64/boot/dts/qcom/lemans-evk.dts | 108 +++++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/lemans.dtsi    |  20 +++++
 2 files changed, 126 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index b40fa203e4a2..2536ebe36edb 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -38,6 +38,35 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector-0 {
+		compatible = "usb-c-connector";
+		label = "USB0-Type-C";
+		data-role = "dual";
+		power-role = "dual";
+
+		vbus-supply = <&vbus_supply_regulator_0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				usb0_con_hs_ep: endpoint {
+					remote-endpoint = <&usb_0_dwc3_hs>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+
+				usb0_con_ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
 	edp0-connector {
 		compatible = "dp-connector";
 		label = "EDP0";
@@ -102,6 +131,15 @@ platform {
 		};
 	};
 
+	vbus_supply_regulator_0: regulator-vbus-supply-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_supply_0";
+		gpio = <&expander1 2 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
 	vmmc_sdc: regulator-vmmc-sdc {
 		compatible = "regulator-fixed";
 
@@ -454,6 +492,43 @@ &gpi_dma2 {
 	status = "okay";
 };
 
+&i2c11 {
+	status = "okay";
+
+	usb-typec@67 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x67>;
+
+		interrupts-extended = <&pmm8654au_2_gpios 5 IRQ_TYPE_EDGE_FALLING>;
+
+		id-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_id>, <&usb0_intr_state>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&usb0_con_ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb_0_dwc3_ss>;
+				};
+			};
+		};
+	};
+};
+
 &i2c18 {
 	status = "okay";
 
@@ -607,6 +682,16 @@ &pmm8654au_0_pon_resin {
 	status = "okay";
 };
 
+&pmm8654au_2_gpios {
+	usb0_intr_state: usb0-intr-state {
+		pins = "gpio5";
+		function = "normal";
+		input-enable;
+		bias-pull-up;
+		power-source = <0>;
+	};
+};
+
 &qup_i2c19_default {
 	drive-strength = <2>;
 	bias-pull-up;
@@ -746,11 +831,24 @@ wake-pins {
 		};
 	};
 
+	qup_i2c11_default: qup-i2c11-state {
+		pins = "gpio48", "gpio49";
+		function = "qup1_se4";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
 	sd_cd: sd-cd-state {
 		pins = "gpio36";
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	usb_id: usb-id-state {
+		pins = "gpio50";
+		function = "gpio";
+		bias-pull-up;
+	};
 };
 
 &uart10 {
@@ -779,11 +877,17 @@ &ufs_mem_phy {
 };
 
 &usb_0 {
-	dr_mode = "peripheral";
-
 	status = "okay";
 };
 
+&usb_0_dwc3_hs {
+	remote-endpoint = <&usb0_con_hs_ep>;
+};
+
+&usb_0_dwc3_ss {
+	remote-endpoint = <&hd3ss3220_out_ep>;
+};
+
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l7a>;
 	vdda18-supply = <&vreg_l6c>;
diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 0b154d57ba24..bf869c5b5ee0 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -4026,7 +4026,27 @@ usb_0: usb@a600000 {
 			snps,dis-u1-entry-quirk;
 			snps,dis-u2-entry-quirk;
 
+			usb-role-switch;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_0_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_0_dwc3_ss: endpoint {
+					};
+				};
+			};
 		};
 
 		usb_1: usb@a800000 {
-- 
2.34.1

Re: [PATCH v7] arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller

[Dmitry Baryshkov]

On Fri, Nov 28, 2025 at 03:55:07PM +0530, Krishna Kurapati wrote:
> Enable OTG support for primary USB controller on EVK Platform. Add
> HD3SS3220 Type-C port controller present between Type-C port and SoC
> that provides role switch notifications to controller.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
> Changes in v7:
> - Renamed hd3ss3220@67 to usb-typec@67
> - Compile tested since its only node name change
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v7] arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller

[Konrad Dybcio]

On 11/28/25 11:25 AM, Krishna Kurapati wrote:
> Enable OTG support for primary USB controller on EVK Platform. Add
> HD3SS3220 Type-C port controller present between Type-C port and SoC
> that provides role switch notifications to controller.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---

[...]

> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				usb0_con_hs_ep: endpoint {
> +					remote-endpoint = <&usb_0_dwc3_hs>;
> +				};
> +			};
> +			port@1 {

Bjorn, could you add a \n here while applying?

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v7] arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller

[Bjorn Andersson]

On Fri, 28 Nov 2025 15:55:07 +0530, Krishna Kurapati wrote:
> Enable OTG support for primary USB controller on EVK Platform. Add
> HD3SS3220 Type-C port controller present between Type-C port and SoC
> that provides role switch notifications to controller.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller
      commit: 3b226dc2a0c39de609ecb383a92d9ed99d7aebc8

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>