From: Imran Khan <imran.f.khan@oracle.com>
To: Tejun Heo <tj@kernel.org>
Cc: viro@zeniv.linux.org.uk, gregkh@linuxfoundation.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/5] kernfs: make ->attr.open RCU protected.
Date: Mon, 16 May 2022 02:00:50 +1000 [thread overview]
Message-ID: <526b46a7-7daa-9050-1276-e19836816991@oracle.com> (raw)
In-Reply-To: <Yn0/RrgMRie2YPEb@slm.duckdns.org>
Hello Tejun,
Thanks for your reply.
On 13/5/22 3:09 am, Tejun Heo wrote:
> Hello,
>
> On Fri, May 06, 2022 at 09:12:23AM +1000, Imran Khan wrote:
>> On 6/5/22 6:01 am, Tejun Heo wrote:
>>> On Thu, Apr 28, 2022 at 03:54:28PM +1000, Imran Khan wrote:
>>>> +static struct kernfs_open_node *kernfs_deref_on_raw(struct kernfs_node *kn)
>>>> +{
>>>> + return rcu_dereference_raw(kn->attr.open);
>>>> +}
>>>
>>> Wrapping the above probably isn't helping anything.
>>>
>>
>> This change is using raw deref at a few places, so I thought of putting
>> raw deref under a wrapper and explain in the wrapper function comment
>> under what conditions raw dereferencing was safe.
>
> I don't think they need raw deref in the first place and if you *really*
> need raw deref, the wrapper explaining why they're needed and how they're
> safe is the whole point of it and I don't think the wrapper achieves that.
>
Okay. I checked with rcu_access_pointer and CONFIG_PROVE_RCU enabled and did not
observe any warning(s) so rcu_access_pointer should have sufficed here. But I am
using rcu_dereference_check to accommodate checking of @of->list as well. The
checking of @of->list also covers one of your later suggestions. I have updated
the description of function as well. Could you please let me know if below looks
okay:
+/*
+ * Deref RCU protected kn->attr.open.
+ * If both @of->list and @kn->attr.open->files are non empty, we can safely
+ * assume that @of is on @kn->attr.open and hence @kn->attr.open will not
+ * vanish and derefeencing is safe here.
+ */
+static struct kernfs_open_node *
+kernfs_deref_on_check(struct kernfs_open_file *of, struct kernfs_node *kn)
+{
+ struct kernfs_open_node *on;
+
+ on = rcu_dereference_check(kn->attr.open, !list_empty(&of->list));
+
+ if (on && list_empty(&on->files))
+ return NULL;
+ else
+ return on;
+}
+
If this looks okay then I can replace usage of kernfs_deref_on_raw with
kernfs_deref_on_check.
>>>> +/*
>>>> + * Check ->attr.open corresponding to @kn while holding kernfs_open_file_mutex.
>>>> + * ->attr.open is modified under kernfs_open_file_mutex. So it can be safely
>>>> + * accessed outside RCU read-side critical section, while holding the mutex.
>>>> + */
>>>> +static struct kernfs_open_node *kernfs_check_on_protected(struct kernfs_node *kn)
>>>> +{
>>>> + return rcu_dereference_check(kn->attr.open,
>>>> + lockdep_is_held(&kernfs_open_file_mutex));
>>>> +}
>>>
>>> Maybe name this just kernfs_deref_on()?
>>>
>>
>> Sure. I can mention in the function comment that this should be used
>> only under kernfs_open_file_mutex.
>
> and in the check condition, add the conditions that you need to make this
> not trigger warning when used in all the places that you wanna use it.
>
Since ->attr.open is always accessed/modified under kernfs_open_file_mutex, I
have included this check in helper which should be used only while holding this
mutex. Do you mean that I should include some additional checks as well in the
below helper:
+/*
+ * Deref ->attr.open corresponding to @kn while holding open_file_mutex.
+ * ->attr.open is modified under kernfs_open_file_mutex. So it can be safely
+ * safely accessed outside RCU read-side critical section, while holding
+ * the mutex.
+ */
+static struct kernfs_open_node *kernfs_deref_on(struct kernfs_node *kn)
+{
+ return rcu_dereference_protected(kn->attr.open,
+ lockdep_is_held(&kernfs_open_file_mutex));
+}
+
>> +static struct kernfs_open_node *kernfs_deref_on_raw(struct
>> kernfs_open_file *of, struct kernfs_node *kn)
>> {
>> - return rcu_dereference_raw(kn->attr.open);
>> + struct kernfs_open_node *on;
>> +
>> + if (list_empty(&of->list))
>> + return NULL;
>> +
>> + on = rcu_dereference_raw(kn->attr.open);
>> +
>> + if (list_empty(&on->files))
>> + return NULL;
>> + else
>> + return on;
>
> Put the above conditions in the rcu_dereference_check(). That's what it is
> for - describing the additional conditions that make the dereference safe.
>
As mentioned earlier, I have included checking of @of->list in
rcu_dereference_check. I am not sure if we can include checking of on->files as
well because "on" itself is the dereferenced pointer value here. So I have kept
checking of on->files separate as shown in the earlier snippet of
kernfs_deref_on_check above.
Thanks
-- Imran
next prev parent reply other threads:[~2022-05-15 16:01 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-28 5:54 [PATCH 0/5] kernfs: Remove reference counting for kernfs_open_node Imran Khan
2022-04-28 5:54 ` [PATCH 1/5] " Imran Khan
2022-05-05 19:46 ` Tejun Heo
2022-04-28 5:54 ` [PATCH 2/5] kernfs: make ->attr.open RCU protected Imran Khan
2022-05-05 20:01 ` Tejun Heo
2022-05-05 23:12 ` Imran Khan
2022-05-12 17:09 ` Tejun Heo
2022-05-15 16:00 ` Imran Khan [this message]
2022-05-16 19:35 ` Tejun Heo
2022-05-17 2:30 ` Imran Khan
2022-05-17 4:21 ` Tejun Heo
2022-04-28 5:54 ` [PATCH 3/5] kernfs: Change kernfs_notify_list to llist Imran Khan
2022-05-05 20:03 ` Tejun Heo
2022-04-28 5:54 ` [PATCH 4/5] kernfs: Introduce interface to access global kernfs_open_file_mutex Imran Khan
2022-05-05 20:04 ` Tejun Heo
2022-04-28 5:54 ` [PATCH 5/5] kernfs: Replace global kernfs_open_file_mutex with hashed mutexes Imran Khan
2022-05-05 20:05 ` Tejun Heo
2022-05-11 9:58 ` Imran Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526b46a7-7daa-9050-1276-e19836816991@oracle.com \
--to=imran.f.khan@oracle.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®