* Re: [PATCH] gpio: Add support for SX151x SPI GPIO Expanders
2013-11-12 19:32 ` [PATCH] gpio: Add support for SX151x SPI GPIO Expanders Linus Walleij
@ 2013-11-12 21:52 ` David Brown
2013-11-18 13:25 ` Linus Walleij
2013-11-19 1:16 ` Stephen Boyd
1 sibling, 1 reply; 4+ messages in thread
From: David Brown @ 2013-11-12 21:52 UTC (permalink / raw)
To: Linus Walleij; +Cc: Viktar Palstsiuk, Gregory Bean, linux-kernel
On Tue, Nov 12, 2013 at 08:32:20PM +0100, Linus Walleij wrote:
>Gregory,
>
>this is your driver, can you take a look at this patch?
I don't think Gregory has this email address any more, and I don't
know another address for him.
David
>Yours,
>Linus Walleij
>
>
>On Thu, Oct 24, 2013 at 11:51 AM, Viktar Palstsiuk
><viktar.palstsiuk@promwad.com> wrote:
>
>> Isolated i2c specific parts and
>> added spi bindings for the sx151x devices.
>>
>> Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
>> ---
>> drivers/gpio/Kconfig | 10 +-
>> drivers/gpio/gpio-sx150x.c | 267 +++++++++++++++++++++++++++++++++++++++------
>> 2 files changed, 239 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
>> index b6ed304..4d296ab 100644
>> --- a/drivers/gpio/Kconfig
>> +++ b/drivers/gpio/Kconfig
>> @@ -465,15 +465,15 @@ config GPIO_RC5T583
>> of RC5T583 device through standard gpio library.
>>
>> config GPIO_SX150X
>> - bool "Semtech SX150x I2C GPIO expander"
>> - depends on I2C=y
>> + bool "Semtech SX15xx I2C/SPI GPIO expander"
>> + depends on SPI_MASTER || I2C
>> default n
>> help
>> - Say yes here to provide support for Semtech SX150-series I2C
>> + Say yes here to provide support for Semtech SX15xx-series I2C/SPI
>> GPIO expanders. Compatible models include:
>>
>> - 8 bits: sx1508q
>> - 16 bits: sx1509q
>> + 8 bits: sx1508q, sx1511
>> + 16 bits: sx1509q, sx1512
>>
>> config GPIO_STMPE
>> bool "STMPE GPIOs"
>> diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
>> index d2983e9..bee1661 100644
>> --- a/drivers/gpio/gpio-sx150x.c
>> +++ b/drivers/gpio/gpio-sx150x.c
>> @@ -22,9 +22,16 @@
>> #include <linux/module.h>
>> #include <linux/mutex.h>
>> #include <linux/slab.h>
>> +#include <linux/spi/spi.h>
>> #include <linux/workqueue.h>
>> #include <linux/i2c/sx150x.h>
>>
>> +/**
>> + * SX15xx types supported by driver
>> + */
>> +#define SX15_TYPE_8_GPIOS 0
>> +#define SX15_TYPE_16_GPIOS 1
>> +
>> #define NO_UPDATE_PENDING -1
>>
>> struct sx150x_device_data {
>> @@ -43,9 +50,17 @@ struct sx150x_device_data {
>> u8 ngpios;
>> };
>>
>> +struct sx150x_chip;
>> +
>> +struct sx15xx_ops {
>> + s32 (*read)(struct device *dev, u8 reg, u8 *val);
>> + s32 (*write)(struct device *dev, u8 reg, u8 val);
>> +};
>> +
>> struct sx150x_chip {
>> struct gpio_chip gpio_chip;
>> - struct i2c_client *client;
>> + struct device *dev;
>> + const struct sx15xx_ops *ops;
>> const struct sx150x_device_data *dev_cfg;
>> int irq_summary;
>> int irq_base;
>> @@ -59,7 +74,7 @@ struct sx150x_chip {
>> };
>>
>> static const struct sx150x_device_data sx150x_devices[] = {
>> - [0] = { /* sx1508q */
>> + [SX15_TYPE_8_GPIOS] = { /* sx1508q */
>> .reg_pullup = 0x03,
>> .reg_pulldn = 0x04,
>> .reg_drain = 0x05,
>> @@ -74,7 +89,7 @@ static const struct sx150x_device_data sx150x_devices[] = {
>> .reg_reset = 0x7d,
>> .ngpios = 8
>> },
>> - [1] = { /* sx1509q */
>> + [SX15_TYPE_16_GPIOS] = { /* sx1509q */
>> .reg_pullup = 0x07,
>> .reg_pulldn = 0x09,
>> .reg_drain = 0x0b,
>> @@ -91,37 +106,86 @@ static const struct sx150x_device_data sx150x_devices[] = {
>> },
>> };
>>
>> -static const struct i2c_device_id sx150x_id[] = {
>> - {"sx1508q", 0},
>> - {"sx1509q", 1},
>> - {}
>> -};
>> -MODULE_DEVICE_TABLE(i2c, sx150x_id);
>> +#ifdef CONFIG_I2C
>>
>> -static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
>> +static s32 sx150x_i2c_write(struct device *dev, u8 reg, u8 val)
>> {
>> + struct i2c_client *client = to_i2c_client(dev);
>> s32 err = i2c_smbus_write_byte_data(client, reg, val);
>>
>> if (err < 0)
>> - dev_warn(&client->dev,
>> + dev_warn(dev,
>> "i2c write fail: can't write %02x to %02x: %d\n",
>> val, reg, err);
>> return err;
>> }
>>
>> -static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
>> +static s32 sx150x_i2c_read(struct device *dev, u8 reg, u8 *val)
>> {
>> + struct i2c_client *client = to_i2c_client(dev);
>> s32 err = i2c_smbus_read_byte_data(client, reg);
>>
>> if (err >= 0)
>> *val = err;
>> else
>> - dev_warn(&client->dev,
>> + dev_warn(dev,
>> "i2c read fail: can't read from %02x: %d\n",
>> reg, err);
>> return err;
>> }
>>
>> +static const struct sx15xx_ops sx150x_ops = {
>> + .read = sx150x_i2c_read,
>> + .write = sx150x_i2c_write,
>> +};
>> +
>> +#endif /* CONFIG_I2C */
>> +
>> +#ifdef CONFIG_SPI_MASTER
>> +
>> +static s32 sx151x_spi_write(struct device *dev, u8 reg, u8 val)
>> +{
>> + struct spi_device *spi = to_spi_device(dev);
>> + u8 tx[2];
>> + s32 err;
>> +
>> + tx[0] = reg;
>> + tx[1] = val;
>> +
>> + err = spi_write(spi, tx, sizeof tx);
>> +
>> + if (err < 0)
>> + dev_warn(dev,
>> + "spi write fail: can't write %02x to %02x: %d\n",
>> + val, reg, err);
>> + return err;
>> +}
>> +
>> +static s32 sx151x_spi_read(struct device *dev, u8 reg, u8 *val)
>> +{
>> + struct spi_device *spi = to_spi_device(dev);
>> + u8 tx[1], rx[1];
>> + s32 err;
>> +
>> + tx[0] = reg | 0x80;
>> + err = spi_write_then_read(spi, tx, sizeof tx, rx, sizeof rx);
>> +
>> + if (err >= 0)
>> + *val = rx[0];
>> + else
>> + dev_warn(dev,
>> + "spi read fail: can't read from %02x: %d\n",
>> + reg, err);
>> + return err;
>> +}
>> +
>> +static const struct sx15xx_ops sx151x_ops = {
>> + .read = sx151x_spi_read,
>> + .write = sx151x_spi_write,
>> +};
>> +
>> +#endif /* CONFIG_SPI_MASTER */
>> +
>> static inline bool offset_is_oscio(struct sx150x_chip *chip, unsigned offset)
>> {
>> return (chip->dev_cfg->ngpios == offset);
>> @@ -164,13 +228,12 @@ static s32 sx150x_write_cfg(struct sx150x_chip *chip,
>> s32 err;
>>
>> sx150x_find_cfg(offset, width, ®, &mask, &shift);
>> - err = sx150x_i2c_read(chip->client, reg, &data);
>> + err = chip->ops->read(chip->dev, reg, &data);
>> if (err < 0)
>> return err;
>> -
>> data &= ~mask;
>> data |= (val << shift) & mask;
>> - return sx150x_i2c_write(chip->client, reg, data);
>> + return chip->ops->write(chip->dev, reg, data);
>> }
>>
>> static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
>> @@ -182,7 +245,7 @@ static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
>> s32 err;
>>
>> sx150x_find_cfg(offset, 1, ®, &mask, &shift);
>> - err = sx150x_i2c_read(chip->client, reg, &data);
>> + err = chip->ops->read(chip->dev, reg, &data);
>> if (err >= 0)
>> err = (data & mask) != 0 ? 1 : 0;
>>
>> @@ -191,7 +254,7 @@ static int sx150x_get_io(struct sx150x_chip *chip, unsigned offset)
>>
>> static void sx150x_set_oscio(struct sx150x_chip *chip, int val)
>> {
>> - sx150x_i2c_write(chip->client,
>> + chip->ops->write(chip->dev,
>> chip->dev_cfg->reg_clock,
>> (val ? 0x1f : 0x10));
>> }
>> @@ -361,13 +424,13 @@ static irqreturn_t sx150x_irq_thread_fn(int irq, void *dev_id)
>> int i;
>>
>> for (i = (chip->dev_cfg->ngpios / 8) - 1; i >= 0; --i) {
>> - err = sx150x_i2c_read(chip->client,
>> + err = chip->ops->read(chip->dev,
>> chip->dev_cfg->reg_irq_src - i,
>> &val);
>> if (err < 0)
>> continue;
>>
>> - sx150x_i2c_write(chip->client,
>> + chip->ops->write(chip->dev,
>> chip->dev_cfg->reg_irq_src - i,
>> val);
>> for (n = 0; n < 8; ++n) {
>> @@ -421,15 +484,17 @@ out:
>> }
>>
>> static void sx150x_init_chip(struct sx150x_chip *chip,
>> - struct i2c_client *client,
>> + struct device *dev,
>> + const struct sx15xx_ops *ops,
>> kernel_ulong_t driver_data,
>> struct sx150x_platform_data *pdata)
>> {
>> mutex_init(&chip->lock);
>>
>> - chip->client = client;
>> + chip->dev = dev;
>> + chip->ops = ops;
>> chip->dev_cfg = &sx150x_devices[driver_data];
>> - chip->gpio_chip.label = client->name;
>> + chip->gpio_chip.label = dev_name(dev);
>> chip->gpio_chip.direction_input = sx150x_gpio_direction_input;
>> chip->gpio_chip.direction_output = sx150x_gpio_direction_output;
>> chip->gpio_chip.get = sx150x_gpio_get;
>> @@ -441,7 +506,7 @@ static void sx150x_init_chip(struct sx150x_chip *chip,
>> if (pdata->oscio_is_gpo)
>> ++chip->gpio_chip.ngpio;
>>
>> - chip->irq_chip.name = client->name;
>> + chip->irq_chip.name = dev_name(dev);
>> chip->irq_chip.irq_mask = sx150x_irq_mask;
>> chip->irq_chip.irq_unmask = sx150x_irq_unmask;
>> chip->irq_chip.irq_set_type = sx150x_irq_set_type;
>> @@ -462,7 +527,7 @@ static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
>> unsigned n;
>>
>> for (n = 0; err >= 0 && n < (chip->dev_cfg->ngpios / 8); ++n)
>> - err = sx150x_i2c_write(chip->client, base - n, cfg >> (n * 8));
>> + err = chip->ops->write(chip->dev, base - n, cfg >> (n * 8));
>> return err;
>> }
>>
>> @@ -470,13 +535,13 @@ static int sx150x_reset(struct sx150x_chip *chip)
>> {
>> int err;
>>
>> - err = i2c_smbus_write_byte_data(chip->client,
>> + err = chip->ops->write(chip->dev,
>> chip->dev_cfg->reg_reset,
>> 0x12);
>> if (err < 0)
>> return err;
>>
>> - err = i2c_smbus_write_byte_data(chip->client,
>> + err = chip->ops->write(chip->dev,
>> chip->dev_cfg->reg_reset,
>> 0x34);
>> return err;
>> @@ -493,7 +558,7 @@ static int sx150x_init_hw(struct sx150x_chip *chip,
>> return err;
>> }
>>
>> - err = sx150x_i2c_write(chip->client,
>> + err = chip->ops->write(chip->dev,
>> chip->dev_cfg->reg_misc,
>> 0x01);
>> if (err < 0)
>> @@ -548,7 +613,7 @@ static int sx150x_install_irq_chip(struct sx150x_chip *chip,
>> #endif
>> }
>>
>> - err = devm_request_threaded_irq(&chip->client->dev,
>> + err = devm_request_threaded_irq(chip->dev,
>> irq_summary,
>> NULL,
>> sx150x_irq_thread_fn,
>> @@ -574,6 +639,8 @@ static void sx150x_remove_irq_chip(struct sx150x_chip *chip)
>> }
>> }
>>
>> +#ifdef CONFIG_I2C
>> +
>> static int sx150x_probe(struct i2c_client *client,
>> const struct i2c_device_id *id)
>> {
>> @@ -595,7 +662,7 @@ static int sx150x_probe(struct i2c_client *client,
>> if (!chip)
>> return -ENOMEM;
>>
>> - sx150x_init_chip(chip, client, id->driver_data, pdata);
>> + sx150x_init_chip(chip, &client->dev, &sx150x_ops, id->driver_data, pdata);
>> rc = sx150x_init_hw(chip, pdata);
>> if (rc < 0)
>> return rc;
>> @@ -636,6 +703,13 @@ static int sx150x_remove(struct i2c_client *client)
>> return 0;
>> }
>>
>> +static const struct i2c_device_id sx150x_id[] = {
>> + {"sx1508q", SX15_TYPE_8_GPIOS},
>> + {"sx1509q", SX15_TYPE_16_GPIOS},
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(i2c, sx150x_id);
>> +
>> static struct i2c_driver sx150x_driver = {
>> .driver = {
>> .name = "sx150x",
>> @@ -646,19 +720,146 @@ static struct i2c_driver sx150x_driver = {
>> .id_table = sx150x_id,
>> };
>>
>> -static int __init sx150x_init(void)
>> +static int __init sx150x_i2c_init(void)
>> {
>> return i2c_add_driver(&sx150x_driver);
>> }
>> +
>> +static void __exit sx150x_i2c_exit(void)
>> +{
>> + return i2c_del_driver(&sx150x_driver);
>> +}
>> +
>> +#else
>> +
>> +static int __init sx150x_i2c_init(void) { return 0; }
>> +static void sx150x_i2c_exit(void) { }
>> +
>> +#endif /* CONFIG_I2C */
>> +
>> +#ifdef CONFIG_SPI_MASTER
>> +
>> +static int sx151x_probe(struct spi_device *spi)
>> +{
>> + struct sx150x_platform_data *pdata;
>> + struct sx150x_chip *chip;
>> + int rc;
>> +
>> + pdata = dev_get_platdata(&spi->dev);
>> + if (!pdata) {
>> + return -EINVAL;
>> + }
>> +
>> + chip = devm_kzalloc(&spi->dev,
>> + sizeof(struct sx150x_chip), GFP_KERNEL);
>> + if (!chip)
>> + return -ENOMEM;
>> +
>> + sx150x_init_chip(chip, &spi->dev, &sx151x_ops,
>> + spi_get_device_id(spi)->driver_data, pdata);
>> + rc = sx150x_init_hw(chip, pdata);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = gpiochip_add(&chip->gpio_chip);
>> + if (rc < 0)
>> + return rc;
>> +
>> + if (pdata->irq_summary >= 0) {
>> + rc = sx150x_install_irq_chip(chip,
>> + pdata->irq_summary,
>> + pdata->irq_base);
>> + if (rc < 0)
>> + goto probe_fail_post_gpiochip_add;
>> + }
>> +
>> + spi_set_drvdata(spi, chip);
>> +
>> + return 0;
>> +probe_fail_post_gpiochip_add:
>> + WARN_ON(gpiochip_remove(&chip->gpio_chip) < 0);
>> + return rc;
>> +}
>> +
>> +static int sx151x_remove(struct spi_device *spi)
>> +{
>> + struct sx150x_chip *chip;
>> + int rc;
>> +
>> + chip = spi_get_drvdata(spi);
>> + rc = gpiochip_remove(&chip->gpio_chip);
>> + if (rc < 0)
>> + return rc;
>> +
>> + if (chip->irq_summary >= 0)
>> + sx150x_remove_irq_chip(chip);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct spi_device_id sx151x_ids[] = {
>> + { "sx1511", SX15_TYPE_8_GPIOS },
>> + { "sx1512", SX15_TYPE_16_GPIOS },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(spi, sx151x_ids);
>> +
>> +static struct spi_driver sx151x_driver = {
>> + .probe = sx151x_probe,
>> + .remove = sx151x_remove,
>> + .id_table = sx151x_ids,
>> + .driver = {
>> + .name = "sx151x",
>> + .owner = THIS_MODULE,
>> + },
>> +};
>> +
>> +static int __init sx151x_spi_init(void)
>> +{
>> + return spi_register_driver(&sx151x_driver);
>> +}
>> +
>> +static void sx151x_spi_exit(void)
>> +{
>> + spi_unregister_driver(&sx151x_driver);
>> +}
>> +
>> +#else
>> +
>> +static int __init sx151x_spi_init(void) { return 0; }
>> +static void sx151x_spi_exit(void) { }
>> +
>> +#endif /* CONFIG_SPI_MASTER */
>> +
>> +static int __init sx150x_init(void)
>> +{
>> + int ret;
>> +
>> + ret = sx151x_spi_init();
>> + if (ret)
>> + goto spi_fail;
>> +
>> + ret = sx150x_i2c_init();
>> + if (ret)
>> + goto i2c_fail;
>> +
>> + return 0;
>> +
>> + i2c_fail:
>> + sx151x_spi_exit();
>> + spi_fail:
>> + return ret;
>> +}
>> subsys_initcall(sx150x_init);
>>
>> static void __exit sx150x_exit(void)
>> {
>> - return i2c_del_driver(&sx150x_driver);
>> + sx151x_spi_exit();
>> + sx150x_i2c_exit();
>> }
>> module_exit(sx150x_exit);
>>
>> MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
>> -MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
>> +MODULE_DESCRIPTION("Driver for Semtech SX15xx I2C/SPI GPIO Expanders");
>> MODULE_LICENSE("GPL v2");
>> MODULE_ALIAS("i2c:sx150x");
>> --
>> 1.8.4.rc3
>>
--
sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] gpio: Add support for SX151x SPI GPIO Expanders
2013-11-12 19:32 ` [PATCH] gpio: Add support for SX151x SPI GPIO Expanders Linus Walleij
2013-11-12 21:52 ` David Brown
@ 2013-11-19 1:16 ` Stephen Boyd
1 sibling, 0 replies; 4+ messages in thread
From: Stephen Boyd @ 2013-11-19 1:16 UTC (permalink / raw)
To: Viktar Palstsiuk, Gregory Bean; +Cc: Linus Walleij, linux-kernel, David Brown
On Thu, Oct 24, 2013 at 11:51 AM, Viktar Palstsiuk
<viktar.palstsiuk@promwad.com> wrote:
>> Isolated i2c specific parts and
>> added spi bindings for the sx151x devices.
>>
>> Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
>>
>> diff --git a/drivers/gpio/gpio-sx150x.c b/drivers/gpio/gpio-sx150x.c
>> index d2983e9..bee1661 100644
>> --- a/drivers/gpio/gpio-sx150x.c
>> +++ b/drivers/gpio/gpio-sx150x.c
>> @@ -22,9 +22,16 @@
>> #include <linux/module.h>
>> #include <linux/mutex.h>
>> #include <linux/slab.h>
>> +#include <linux/spi/spi.h>
>> #include <linux/workqueue.h>
>> #include <linux/i2c/sx150x.h>
>>
>> +/**
>> + * SX15xx types supported by driver
>> + */
>> +#define SX15_TYPE_8_GPIOS 0
>> +#define SX15_TYPE_16_GPIOS 1
>> +
>> #define NO_UPDATE_PENDING -1
>>
>> struct sx150x_device_data {
>> @@ -43,9 +50,17 @@ struct sx150x_device_data {
>> u8 ngpios;
>> };
>>
>> +struct sx150x_chip;
>> +
>> +struct sx15xx_ops {
>> + s32 (*read)(struct device *dev, u8 reg, u8 *val);
>> + s32 (*write)(struct device *dev, u8 reg, u8 val);
>> +};
It would be better to convert this driver to use the regmap APIs. That
could be the first patch and then the second patch would be splitting
off the i2c and spi parts into separate files that use the core code.
>> struct sx150x_chip {
>> struct gpio_chip gpio_chip;
>> - struct i2c_client *client;
>> + struct device *dev;
>> + const struct sx15xx_ops *ops;
>> const struct sx150x_device_data *dev_cfg;
>> int irq_summary;
>> int irq_base;
>> @@ -59,7 +74,7 @@ struct sx150x_chip {
>> };
>>
>> static const struct sx150x_device_data sx150x_devices[] = {
>> - [0] = { /* sx1508q */
>> + [SX15_TYPE_8_GPIOS] = { /* sx1508q */
>> .reg_pullup = 0x03,
>> .reg_pulldn = 0x04,
>> .reg_drain = 0x05,
>> @@ -74,7 +89,7 @@ static const struct sx150x_device_data sx150x_devices[] = {
>> .reg_reset = 0x7d,
>> .ngpios = 8
>> },
>> - [1] = { /* sx1509q */
>> + [SX15_TYPE_16_GPIOS] = { /* sx1509q */
>> .reg_pullup = 0x07,
>> .reg_pulldn = 0x09,
>> .reg_drain = 0x0b,
This looks like general cleanup that could be it's own patch as well.
>> @@ -91,37 +106,86 @@ static const struct sx150x_device_data sx150x_devices[] = {
>> },
>> };
>>
>> -static const struct i2c_device_id sx150x_id[] = {
>> - {"sx1508q", 0},
>> - {"sx1509q", 1},
>> - {}
>> -};
>> -MODULE_DEVICE_TABLE(i2c, sx150x_id);
>> +#ifdef CONFIG_I2C
>>
>> -static s32 sx150x_i2c_write(struct i2c_client *client, u8 reg, u8 val)
>> +static s32 sx150x_i2c_write(struct device *dev, u8 reg, u8 val)
>> {
>> + struct i2c_client *client = to_i2c_client(dev);
>> s32 err = i2c_smbus_write_byte_data(client, reg, val);
>>
>> if (err < 0)
>> - dev_warn(&client->dev,
>> + dev_warn(dev,
>> "i2c write fail: can't write %02x to %02x: %d\n",
>> val, reg, err);
>> return err;
>> }
>>
>> -static s32 sx150x_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
>> +static s32 sx150x_i2c_read(struct device *dev, u8 reg, u8 *val)
>> {
>> + struct i2c_client *client = to_i2c_client(dev);
>> s32 err = i2c_smbus_read_byte_data(client, reg);
>>
>> if (err >= 0)
>> *val = err;
>> else
>> - dev_warn(&client->dev,
>> + dev_warn(dev,
>> "i2c read fail: can't read from %02x: %d\n",
>> reg, err);
>> return err;
>> }
>>
>> +static const struct sx15xx_ops sx150x_ops = {
>> + .read = sx150x_i2c_read,
>> + .write = sx150x_i2c_write,
>> +};
>> +
This could all be simpler with the regmap APIs.
>> +#ifdef CONFIG_SPI_MASTER
>> +
>> +static int sx151x_probe(struct spi_device *spi)
>> +{
>> + struct sx150x_platform_data *pdata;
>> + struct sx150x_chip *chip;
>> + int rc;
>> +
>> + pdata = dev_get_platdata(&spi->dev);
>> + if (!pdata) {
>> + return -EINVAL;
>> + }
>> +
>> + chip = devm_kzalloc(&spi->dev,
>> + sizeof(struct sx150x_chip), GFP_KERNEL);
>> + if (!chip)
>> + return -ENOMEM;
>> +
>> + sx150x_init_chip(chip, &spi->dev, &sx151x_ops,
>> + spi_get_device_id(spi)->driver_data, pdata);
>> + rc = sx150x_init_hw(chip, pdata);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = gpiochip_add(&chip->gpio_chip);
>> + if (rc < 0)
>> + return rc;
>> +
>> + if (pdata->irq_summary >= 0) {
>> + rc = sx150x_install_irq_chip(chip,
>> + pdata->irq_summary,
>> + pdata->irq_base);
>> + if (rc < 0)
>> + goto probe_fail_post_gpiochip_add;
>> + }
>> +
>> + spi_set_drvdata(spi, chip);
>> +
>> + return 0;
>> +probe_fail_post_gpiochip_add:
>> + WARN_ON(gpiochip_remove(&chip->gpio_chip) < 0);
>> + return rc;
>> +}
>> +
>> +static int sx151x_remove(struct spi_device *spi)
>> +{
>> + struct sx150x_chip *chip;
>> + int rc;
>> +
>> + chip = spi_get_drvdata(spi);
>> + rc = gpiochip_remove(&chip->gpio_chip);
>> + if (rc < 0)
>> + return rc;
>> +
>> + if (chip->irq_summary >= 0)
>> + sx150x_remove_irq_chip(chip);
>> +
>> + return 0;
>> +}
This is mostly copy paste of the i2c version. Can you make the non-spi
part common?
>> +
>> +static const struct spi_device_id sx151x_ids[] = {
>> + { "sx1511", SX15_TYPE_8_GPIOS },
>> + { "sx1512", SX15_TYPE_16_GPIOS },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(spi, sx151x_ids);
>> +
[...]
>>
>> static void __exit sx150x_exit(void)
>> {
>> - return i2c_del_driver(&sx150x_driver);
>> + sx151x_spi_exit();
>> + sx150x_i2c_exit();
>> }
>> module_exit(sx150x_exit);
>>
>> MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
>> -MODULE_DESCRIPTION("Driver for Semtech SX150X I2C GPIO Expanders");
>> +MODULE_DESCRIPTION("Driver for Semtech SX15xx I2C/SPI GPIO Expanders");
>> MODULE_LICENSE("GPL v2");
>> MODULE_ALIAS("i2c:sx150x");
>>
Do you need another MODULE_ALIAS("spi:..." here?
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
^ permalink raw reply [flat|nested] 4+ messages in thread