From: "Li, ZhenHua" <zhen-hual@hp.com>
To: "Li, Zhen-Hua" <zhen-hual@hp.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
Joerg Roedel <joro@8bytes.org>,
iommu@lists.linux-foundation.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Wu, Feng" <feng.wu@intel.com>,
Kai Huang <dev.kai.huang@gmail.com>,
jiang.liu@linux.intel.com
Subject: Re: [PATCH 1/1] x86/iommu: use bit structures for context_entry
Date: Fri, 10 Jan 2014 16:31:41 +0800 [thread overview]
Message-ID: <52CFAFED.1040505@hp.com> (raw)
In-Reply-To: <1389342475-8540-1-git-send-email-zhen-hual@hp.com>
This patch is sent again because a ';' was missed in my last mail.
> + context->asr = value >> VTD_PAGE_SHIFT
I corrected it and created a new one. And it is tested .
Please use the latest one.
Sorry for that.
ZhenHua
On 01/10/2014 04:27 PM, Li, Zhen-Hua wrote:
> There is a structure named context_entry used by intel iommu, and there
> are some bit operations on it. Use bit structure may make these operations
> easy.
> Also the function context_set_address_root may cause problem because it uses
> |= operation, not set the new value. And this patch can fix it.
>
> Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
> ---
> drivers/iommu/intel-iommu.c | 37 +++++++++++++++++++++++++++----------
> 1 file changed, 27 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
> index 43b9bfe..65cd480 100644
> --- a/drivers/iommu/intel-iommu.c
> +++ b/drivers/iommu/intel-iommu.c
> @@ -221,47 +221,64 @@ get_context_addr_from_root(struct root_entry *root)
> * 8-23: domain id
> */
> struct context_entry {
> - u64 lo;
> - u64 hi;
> + union {
> + struct {
> + u64 present:1,
> + fpd:1,
> + translation_type:2,
> + reserved_l:8,
> + asr:52;
> + };
> + u64 lo;
> + };
> + union {
> + struct {
> + u64 aw:3,
> + avail:4,
> + reserved_h1:1,
> + did:16,
> + reserved_h2:40;
> + };
> + u64 hi;
> + };
> };
>
> static inline bool context_present(struct context_entry *context)
> {
> - return (context->lo & 1);
> + return context->present;
> }
> static inline void context_set_present(struct context_entry *context)
> {
> - context->lo |= 1;
> + context->present = 1;
> }
>
> static inline void context_set_fault_enable(struct context_entry *context)
> {
> - context->lo &= (((u64)-1) << 2) | 1;
> + context->fpd = 1;
> }
>
> static inline void context_set_translation_type(struct context_entry *context,
> unsigned long value)
> {
> - context->lo &= (((u64)-1) << 4) | 3;
> - context->lo |= (value & 3) << 2;
> + context->translation_type = value;
> }
>
> static inline void context_set_address_root(struct context_entry *context,
> unsigned long value)
> {
> - context->lo |= value & VTD_PAGE_MASK;
> + context->asr = value >> VTD_PAGE_SHIFT;
> }
>
> static inline void context_set_address_width(struct context_entry *context,
> unsigned long value)
> {
> - context->hi |= value & 7;
> + context->aw = value;
> }
>
> static inline void context_set_domain_id(struct context_entry *context,
> unsigned long value)
> {
> - context->hi |= (value & ((1 << 16) - 1)) << 8;
> + context->did = value;
> }
>
> static inline void context_clear_entry(struct context_entry *context)
>
next prev parent reply other threads:[~2014-01-10 8:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-10 8:27 Li, Zhen-Hua
2014-01-10 8:31 ` Li, ZhenHua [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-12-20 8:45 Li, Zhen-Hua
[not found] ` <CAOtp4KqUgSnwadP0T=aWYX7rRzDBn3qkuqMzceDBO0c_bhpFwQ@mail.gmail.com>
[not found] ` <E959C4978C3B6342920538CF579893F001D3C26D@SHSMSX104.ccr.corp.intel.com>
2014-01-06 1:41 ` Li, ZhenHua
2014-01-07 14:41 ` Joerg Roedel
2014-01-10 7:29 ` Li, ZhenHua
2014-01-10 7:32 ` Jiang Liu
2013-05-24 0:22 Li, Zhen-Hua
2013-05-24 0:36 ` Joe Perches
2013-05-24 0:43 ` ZhenHua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52CFAFED.1040505@hp.com \
--to=zhen-hual@hp.com \
--cc=dev.kai.huang@gmail.com \
--cc=dwmw2@infradead.org \
--cc=feng.wu@intel.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jiang.liu@linux.intel.com \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome