* [PATCH 3/5] f2fs: format segment_info's show for better legibility @ 2014-03-07 10:43 Gu Zheng 2014-03-13 9:13 ` [f2fs-dev] " Chao Yu 0 siblings, 1 reply; 4+ messages in thread From: Gu Zheng @ 2014-03-07 10:43 UTC (permalink / raw) To: Kim; +Cc: f2fs, linux-kernel The original segment_info's show is a bit out-of-format: [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...... 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 [root@guz Demoes]# so we fix it here for better legibility. [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ...... 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 1 [root@guz Demoes]# Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> --- fs/f2fs/super.c | 7 ++++--- 1 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index 72df734..6e4851c 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -546,11 +546,12 @@ static int segment_info_seq_show(struct seq_file *seq, void *offset) for (i = 0; i < total_segs; i++) { seq_printf(seq, "%u", get_valid_blocks(sbi, i, 1)); - if (i != 0 && (i % 10) == 0) - seq_puts(seq, "\n"); + if ((i % 10) == 9 || i == (total_segs - 1)) + seq_putc(seq, '\n'); else - seq_puts(seq, " "); + seq_putc(seq, ' '); } + return 0; } -- 1.7.7 ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [f2fs-dev] [PATCH 3/5] f2fs: format segment_info's show for better legibility 2014-03-07 10:43 [PATCH 3/5] f2fs: format segment_info's show for better legibility Gu Zheng @ 2014-03-13 9:13 ` Chao Yu 2014-03-13 9:57 ` Gu Zheng 0 siblings, 1 reply; 4+ messages in thread From: Chao Yu @ 2014-03-13 9:13 UTC (permalink / raw) To: 'Gu Zheng', 'Kim'; +Cc: 'linux-kernel', 'f2fs' Hi Gu, > -----Original Message----- > From: Gu Zheng [mailto:guz.fnst@cn.fujitsu.com] > Sent: Friday, March 07, 2014 6:44 PM > To: Kim > Cc: linux-kernel; f2fs > Subject: [f2fs-dev] [PATCH 3/5] f2fs: format segment_info's show for better legibility > > The original segment_info's show is a bit out-of-format: > > [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info > 0 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > ...... > 0 0 0 0 0 0 0 0 0 0 > 0 0 1 0 0 1 [root@guz Demoes]# > > so we fix it here for better legibility. > [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info > 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > ...... > 0 0 0 0 0 0 0 0 0 0 > 0 0 1 0 0 1 > [root@guz Demoes]# Here is one case, this looks not legible. 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 509 512 512 512 512 512 512 512 512 512 512 512 512 512 512 512 512 512 331 278 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 512 512 512 512 512 512 512 512 512 512 512 512 512 0 512 512 512 512 512 512 1 0 512 So how about modifying code as following? > > Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reviewed-by: Chao Yu <chao2.yu@samsung.com> > --- > fs/f2fs/super.c | 7 ++++--- > 1 files changed, 4 insertions(+), 3 deletions(-) > > diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c > index 72df734..6e4851c 100644 > --- a/fs/f2fs/super.c > +++ b/fs/f2fs/super.c > @@ -546,11 +546,12 @@ static int segment_info_seq_show(struct seq_file *seq, void *offset) > > for (i = 0; i < total_segs; i++) { > seq_printf(seq, "%u", get_valid_blocks(sbi, i, 1)); seq_printf(seq, "%-3u ", get_valid_blocks(sbi, i, 1)); > - if (i != 0 && (i % 10) == 0) > - seq_puts(seq, "\n"); > + if ((i % 10) == 9 || i == (total_segs - 1)) > + seq_putc(seq, '\n'); > else > - seq_puts(seq, " "); > + seq_putc(seq, ' '); > } > + > return 0; > } > > -- > 1.7.7 > > > ------------------------------------------------------------------------------ > Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. > With Perforce, you get hassle-free workflows. Merge that actually works. > Faster operations. Version large binaries. Built-in WAN optimization and the > freedom to use Git, Perforce or both. Make the move to Perforce. > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > _______________________________________________ > Linux-f2fs-devel mailing list > Linux-f2fs-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [f2fs-dev] [PATCH 3/5] f2fs: format segment_info's show for better legibility 2014-03-13 9:13 ` [f2fs-dev] " Chao Yu @ 2014-03-13 9:57 ` Gu Zheng 2014-03-17 2:14 ` Chao Yu 0 siblings, 1 reply; 4+ messages in thread From: Gu Zheng @ 2014-03-13 9:57 UTC (permalink / raw) To: Chao Yu; +Cc: 'Kim', 'linux-kernel', 'f2fs' Hi, On 03/13/2014 05:13 PM, Chao Yu wrote: > Hi Gu, > >> -----Original Message----- >> From: Gu Zheng [mailto:guz.fnst@cn.fujitsu.com] >> Sent: Friday, March 07, 2014 6:44 PM >> To: Kim >> Cc: linux-kernel; f2fs >> Subject: [f2fs-dev] [PATCH 3/5] f2fs: format segment_info's show for better legibility >> >> The original segment_info's show is a bit out-of-format: >> >> [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info >> 0 0 0 0 0 0 0 0 0 0 0 >> 0 0 0 0 0 0 0 0 0 0 >> 0 0 0 0 0 0 0 0 0 0 >> ...... >> 0 0 0 0 0 0 0 0 0 0 >> 0 0 1 0 0 1 [root@guz Demoes]# >> >> so we fix it here for better legibility. >> [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info >> 0 0 0 0 0 0 0 0 0 0 >> 0 0 0 0 0 0 0 0 0 0 >> 0 0 0 0 0 0 0 0 0 0 >> ...... >> 0 0 0 0 0 0 0 0 0 0 >> 0 0 1 0 0 1 >> [root@guz Demoes]# > > Here is one case, this looks not legible. > > 0 0 0 0 0 0 0 0 0 0 > 1 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 509 512 512 512 > 512 512 512 512 512 512 512 512 512 512 > 512 512 512 512 331 278 0 0 0 0 > 0 0 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 512 512 512 > 512 512 512 512 512 512 512 512 512 512 > 0 512 512 512 512 512 512 1 0 512 > > So how about modifying code as following? > >> >> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> > > Reviewed-by: Chao Yu <chao2.yu@samsung.com> > >> --- >> fs/f2fs/super.c | 7 ++++--- >> 1 files changed, 4 insertions(+), 3 deletions(-) >> >> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c >> index 72df734..6e4851c 100644 >> --- a/fs/f2fs/super.c >> +++ b/fs/f2fs/super.c >> @@ -546,11 +546,12 @@ static int segment_info_seq_show(struct seq_file *seq, void *offset) >> >> for (i = 0; i < total_segs; i++) { >> seq_printf(seq, "%u", get_valid_blocks(sbi, i, 1)); > > seq_printf(seq, "%-3u ", get_valid_blocks(sbi, i, 1)); Hmm, this patch has been applied to f2fs-dev tree, so maybe you can send a patch to enhance it directly!:) Regards, Gu > >> - if (i != 0 && (i % 10) == 0) >> - seq_puts(seq, "\n"); >> + if ((i % 10) == 9 || i == (total_segs - 1)) >> + seq_putc(seq, '\n'); >> else >> - seq_puts(seq, " "); >> + seq_putc(seq, ' '); >> } >> + >> return 0; >> } >> >> -- >> 1.7.7 >> >> >> ------------------------------------------------------------------------------ >> Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. >> With Perforce, you get hassle-free workflows. Merge that actually works. >> Faster operations. Version large binaries. Built-in WAN optimization and the >> freedom to use Git, Perforce or both. Make the move to Perforce. >> http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk >> _______________________________________________ >> Linux-f2fs-devel mailing list >> Linux-f2fs-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [f2fs-dev] [PATCH 3/5] f2fs: format segment_info's show for better legibility 2014-03-13 9:57 ` Gu Zheng @ 2014-03-17 2:14 ` Chao Yu 0 siblings, 0 replies; 4+ messages in thread From: Chao Yu @ 2014-03-17 2:14 UTC (permalink / raw) To: 'Gu Zheng'; +Cc: 'Kim', 'linux-kernel', 'f2fs' Hi Gu, > -----Original Message----- > From: Gu Zheng [mailto:guz.fnst@cn.fujitsu.com] > Sent: Thursday, March 13, 2014 5:58 PM > To: Chao Yu > Cc: 'Kim'; 'linux-kernel'; 'f2fs' > Subject: Re: [f2fs-dev] [PATCH 3/5] f2fs: format segment_info's show for better legibility > > Hi, > On 03/13/2014 05:13 PM, Chao Yu wrote: > > > Hi Gu, > > > >> -----Original Message----- > >> From: Gu Zheng [mailto:guz.fnst@cn.fujitsu.com] > >> Sent: Friday, March 07, 2014 6:44 PM > >> To: Kim > >> Cc: linux-kernel; f2fs > >> Subject: [f2fs-dev] [PATCH 3/5] f2fs: format segment_info's show for better legibility > >> > >> The original segment_info's show is a bit out-of-format: > >> > >> [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info > >> 0 0 0 0 0 0 0 0 0 0 0 > >> 0 0 0 0 0 0 0 0 0 0 > >> 0 0 0 0 0 0 0 0 0 0 > >> ...... > >> 0 0 0 0 0 0 0 0 0 0 > >> 0 0 1 0 0 1 [root@guz Demoes]# > >> > >> so we fix it here for better legibility. > >> [root@guz Demoes]# cat /proc/fs/f2fs/loop0/segment_info > >> 0 0 0 0 0 0 0 0 0 0 > >> 0 0 0 0 0 0 0 0 0 0 > >> 0 0 0 0 0 0 0 0 0 0 > >> ...... > >> 0 0 0 0 0 0 0 0 0 0 > >> 0 0 1 0 0 1 > >> [root@guz Demoes]# > > > > Here is one case, this looks not legible. > > > > 0 0 0 0 0 0 0 0 0 0 > > 1 0 0 0 0 0 0 0 0 0 > > 0 0 0 0 0 0 0 0 0 0 > > 0 0 0 0 0 0 0 0 0 0 > > 0 0 0 0 0 0 0 0 0 0 > > 0 0 0 0 0 0 509 512 512 512 > > 512 512 512 512 512 512 512 512 512 512 > > 512 512 512 512 331 278 0 0 0 0 > > 0 0 0 0 0 0 0 0 0 0 > > 0 0 0 0 0 0 0 512 512 512 > > 512 512 512 512 512 512 512 512 512 512 > > 0 512 512 512 512 512 512 1 0 512 > > > > So how about modifying code as following? > > > > >> > >> Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> > > > > Reviewed-by: Chao Yu <chao2.yu@samsung.com> > > > >> --- > >> fs/f2fs/super.c | 7 ++++--- > >> 1 files changed, 4 insertions(+), 3 deletions(-) > >> > >> diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c > >> index 72df734..6e4851c 100644 > >> --- a/fs/f2fs/super.c > >> +++ b/fs/f2fs/super.c > >> @@ -546,11 +546,12 @@ static int segment_info_seq_show(struct seq_file *seq, void *offset) > >> > >> for (i = 0; i < total_segs; i++) { > >> seq_printf(seq, "%u", get_valid_blocks(sbi, i, 1)); > > > > seq_printf(seq, "%-3u ", get_valid_blocks(sbi, i, 1)); > > Hmm, this patch has been applied to f2fs-dev tree, so maybe you can send a > patch to enhance it directly!:) Alright, I will send another patch to fix it. :) Thanks. > > Regards, > Gu > > > > >> - if (i != 0 && (i % 10) == 0) > >> - seq_puts(seq, "\n"); > >> + if ((i % 10) == 9 || i == (total_segs - 1)) > >> + seq_putc(seq, '\n'); > >> else > >> - seq_puts(seq, " "); > >> + seq_putc(seq, ' '); > >> } > >> + > >> return 0; > >> } > >> > >> -- > >> 1.7.7 > >> > >> > >> ------------------------------------------------------------------------------ > >> Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. > >> With Perforce, you get hassle-free workflows. Merge that actually works. > >> Faster operations. Version large binaries. Built-in WAN optimization and the > >> freedom to use Git, Perforce or both. Make the move to Perforce. > >> http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > >> _______________________________________________ > >> Linux-f2fs-devel mailing list > >> Linux-f2fs-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel > > > > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-03-17 2:16 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-03-07 10:43 [PATCH 3/5] f2fs: format segment_info's show for better legibility Gu Zheng 2014-03-13 9:13 ` [f2fs-dev] " Chao Yu 2014-03-13 9:57 ` Gu Zheng 2014-03-17 2:14 ` Chao Yu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox
Powered by JetHome