Re: 3.15.6 USB issue with pwc cam

Re: 3.15.6 USB issue with pwc cam

[Nick Krause]

On Sat, Aug 2, 2014 at 9:10 AM, Udo van den Heuvel <udovdh@xs4all.nl> wrote:
> Hello,
>
> I moved a PWC webcam to a USB3 port, and this happened:
>
> [53008.911811] usb 5-2: new full-speed USB device number 2 using xhci_hcd
> [53009.213504] usb 5-2: New USB device found, idVendor=0471, idProduct=0311
> [53009.213514] usb 5-2: New USB device strings: Mfr=0, Product=0,
> SerialNumber=1
> [53009.213519] usb 5-2: SerialNumber: 01690000A5000000
> [53009.215547] pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II)
> USB webcam detected.
> [53009.846698] pwc: Registered as video0.
> [53009.846814] input: PWC snapshot button as
> /devices/pci0000:00/0000:00:07.0/0000:02:00.0/usb5/5-2/input/input7
> [53009.847233] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847242] usb 5-2: Not enough bandwidth for altsetting 1
> [53009.847275] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847285] usb 5-2: Not enough bandwidth for altsetting 2
> [53009.847317] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847323] usb 5-2: Not enough bandwidth for altsetting 3
> [53009.847355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847360] usb 5-2: Not enough bandwidth for altsetting 4
> [53010.004876] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.004890] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.004896] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.004960] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.004988] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.004992] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.005066] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.005075] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.005079] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.005530] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.005540] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.005544] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.006438] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.006446] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.006450] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.007453] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.007461] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.007465] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.007567] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.007574] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.007578] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.007681] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.007689] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.007695] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.008126] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.008135] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.008140] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.008798] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.008808] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.008812] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.009576] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.009583] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.009588] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.009680] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.009689] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.009697] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.009978] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.009986] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.009990] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.010705] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.010716] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.010725] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.011350] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.011360] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.011366] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.012643] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.012655] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.012660] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.012758] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.012766] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.012771] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.013017] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.013025] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.013031] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.013793] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.013798] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.013803] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.014096] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.014102] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.014106] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.025999] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026007] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026010] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026072] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026075] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026077] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026119] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026122] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026125] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026388] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026392] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026393] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026588] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026591] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026592] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026872] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026876] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026878] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026908] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026911] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026912] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026949] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026951] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026952] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027119] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027121] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027122] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027279] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027281] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027283] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027550] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027554] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027556] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027594] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027597] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027598] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027675] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027677] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027679] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027870] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027874] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027876] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028157] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028161] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028163] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028662] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028666] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028668] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028709] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028711] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028713] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028794] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028797] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028799] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.029075] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.029078] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.029079] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.029439] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.029442] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.029444] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038066] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038073] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038075] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038107] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038110] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038111] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038148] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038151] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038153] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038437] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038441] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038443] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038617] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038620] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038621] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038890] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038894] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038896] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038928] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038930] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038932] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038964] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038966] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038968] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039140] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039142] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039144] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039296] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039299] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039300] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039598] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039601] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039603] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039654] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039657] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039658] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039772] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039775] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039777] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040044] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040049] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040051] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040331] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040334] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040336] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040838] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040841] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040843] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040884] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040886] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040888] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040971] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040973] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040975] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.041207] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.041209] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.041211] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.041450] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.041454] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.041455] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.050772] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.050788] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.050791] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.050825] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.050837] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.050839] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.050879] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.050882] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.050884] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051166] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051170] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051172] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051408] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051412] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051414] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051805] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051809] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051811] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051842] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051845] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051847] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051880] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051883] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051885] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052174] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052177] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052179] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052390] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052393] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052395] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052783] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052787] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052789] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052887] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052890] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052892] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052982] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052984] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052986] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.053262] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.053264] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.053266] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.053556] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.053559] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.053561] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054205] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054210] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054212] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054256] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054259] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054261] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054358] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054360] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054612] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054615] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054617] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054845] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054848] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054850] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064272] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064280] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064283] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064320] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064324] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064326] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064369] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064373] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064375] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064694] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064698] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064701] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064921] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064925] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064927] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065241] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065245] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065248] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065281] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065285] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065287] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065330] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065333] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065335] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065611] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065628] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065634] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066072] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066078] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066081] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066528] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066533] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066535] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066590] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066594] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066598] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066707] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066710] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066713] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.067095] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.067100] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.067103] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.067457] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.067465] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.067470] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068139] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068144] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068147] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068230] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068233] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068236] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068350] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068354] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068356] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068659] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068663] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068665] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068980] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068985] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068988] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078360] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078366] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078368] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078398] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078400] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078402] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078498] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078501] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078503] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078770] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078774] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078777] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079011] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079015] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079017] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079321] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079324] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079325] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079356] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079359] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079361] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079394] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079396] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079398] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079661] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079663] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079665] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079820] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079822] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079823] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080214] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080218] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080219] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080264] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080266] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080268] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080357] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080359] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080561] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080563] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080564] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080746] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080748] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080749] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081155] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081158] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081160] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081197] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081199] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081201] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081274] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081276] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081278] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081470] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081473] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081474] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081701] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081706] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081710] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53063.286759] ------------[ cut here ]------------
> [53063.286783] WARNING: CPU: 2 PID: 3282 at
> drivers/media/v4l2-core/videobuf2-core.c:2011
> __vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
> [53063.286786] Modules linked in: bnep bluetooth fuse edac_core
> cpufreq_userspace nf_conntrack_netbios_ns nf_conntrack_broadcast
> ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6
> xt_conntrack iptable_filter ipt_MASQUERADE iptable_nat nf_conntrack_ipv4
> nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip6table_filter
> ip6_tables ip_tables x_tables eeprom it87 hwmon_vid ext2 ppdev kvm_amd
> kvm snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi microcode
> k10temp parport_serial pwc parport_pc videobuf2_vmalloc videobuf2_memops
> v4l2_common parport videobuf2_core i2c_piix4 snd_hda_codec_realtek
> videodev evdev cp210x snd_hda_codec_generic snd_hda_intel cdc_acm
> usbserial snd_hda_controller snd_hda_codec snd_seq snd_seq_device
> snd_pcm snd_timer snd button acpi_cpufreq nfsd auth_rpcgss oid_registry
> [53063.286844]  nfs_acl lockd binfmt_misc sunrpc autofs4 hid_generic
> usbhid radeon fbcon ehci_pci bitblit softcursor ehci_hcd font ohci_pci
> ohci_hcd cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight sr_mod
> cdrom drm_kms_helper ttm drm xhci_hcd fb fbdev
> [53063.286876] CPU: 2 PID: 3282 Comm: skype Not tainted 3.15.6 #5
> [53063.286879] Hardware name: Gigabyte Technology Co., Ltd. To be filled
> by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
> [53063.286882]  0000000000000000 000000001e19c613 ffffffff814f1fd3
> 0000000000000000
> [53063.286887]  ffffffff81069fc1 0000000000000000 0000000040045613
> ffff880316167500
> [53063.286892]  ffff88042ca30300 ffff8803cf337c48 ffffffffa0446832
> ffff88042ca30000
> [53063.286897] Call Trace:
> [53063.286907]  [<ffffffff814f1fd3>] ? dump_stack+0x4a/0x75
> [53063.286914]  [<ffffffff81069fc1>] ? warn_slowpath_common+0x81/0xb0
> [53063.286924]  [<ffffffffa0446832>] ? __vb2_queue_cancel+0x102/0x170
> [videobuf2_core]
> [53063.286933]  [<ffffffffa044853d>] ? vb2_internal_streamoff+0x1d/0x50
> [videobuf2_core]
> [53063.286944]  [<ffffffffa0423163>] ? __video_do_ioctl+0x2f3/0x380
> [videodev]
> [53063.286957]  [<ffffffffa0422bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
> [53063.286967]  [<ffffffffa0422e70>] ? video_ioctl2+0x10/0x10 [videodev]
> [53063.286974]  [<ffffffff810bffbb>] ? futex_wait_queue_me+0xdb/0x140
> [53063.286983]  [<ffffffffa041e7df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
> [53063.286993]  [<ffffffffa042c7b6>] ? do_video_ioctl+0x246/0x1330
> [videodev]
> [53063.286998]  [<ffffffff810c0b9c>] ? futex_wake+0x7c/0x160
> [53063.287003]  [<ffffffff810c280c>] ? do_futex+0x12c/0xb00
> [53063.287008]  [<ffffffff814f714e>] ? _raw_spin_unlock_irq+0xe/0x30
> [53063.287013]  [<ffffffff8108e3be>] ? finish_task_switch+0x3e/0xe0
> [53063.287022]  [<ffffffffa042d922>] ? v4l2_compat_ioctl32+0x82/0xb8
> [videodev]
> [53063.287028]  [<ffffffff81185f32>] ? compat_SyS_ioctl+0x132/0x1120
> [53063.287034]  [<ffffffff810b5e1d>] ? ktime_get_ts+0x3d/0xd0
> [53063.287039]  [<ffffffff81085aa8>] ? posix_ktime_get_ts+0x8/0x10
> [53063.287043]  [<ffffffff81086960>] ? SyS_clock_gettime+0x60/0x80
> [53063.287049]  [<ffffffff814f9405>] ? cstar_dispatch+0x7/0x1a
> [53063.287052] ---[ end trace 03072f5e82f277f5 ]---
> [53063.287055] ------------[ cut here ]------------
> [53063.287063] WARNING: CPU: 2 PID: 3282 at
> drivers/media/v4l2-core/videobuf2-core.c:1095
> vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
> [53063.287066] Modules linked in: bnep bluetooth fuse edac_core
> cpufreq_userspace nf_conntrack_netbios_ns nf_conntrack_broadcast
> ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6
> xt_conntrack iptable_filter ipt_MASQUERADE iptable_nat nf_conntrack_ipv4
> nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip6table_filter
> ip6_tables ip_tables x_tables eeprom it87 hwmon_vid ext2 ppdev kvm_amd
> kvm snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi microcode
> k10temp parport_serial pwc parport_pc videobuf2_vmalloc videobuf2_memops
> v4l2_common parport videobuf2_core i2c_piix4 snd_hda_codec_realtek
> videodev evdev cp210x snd_hda_codec_generic snd_hda_intel cdc_acm
> usbserial snd_hda_controller snd_hda_codec snd_seq snd_seq_device
> snd_pcm snd_timer snd button acpi_cpufreq nfsd auth_rpcgss oid_registry
> [53063.287118]  nfs_acl lockd binfmt_misc sunrpc autofs4 hid_generic
> usbhid radeon fbcon ehci_pci bitblit softcursor ehci_hcd font ohci_pci
> ohci_hcd cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight sr_mod
> cdrom drm_kms_helper ttm drm xhci_hcd fb fbdev
> [53063.287143] CPU: 2 PID: 3282 Comm: skype Tainted: G        W
> 3.15.6 #5
> [53063.287146] Hardware name: Gigabyte Technology Co., Ltd. To be filled
> by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
> [53063.287148]  0000000000000000 000000001e19c613 ffffffff814f1fd3
> 0000000000000000
> [53063.287153]  ffffffff81069fc1 0000000000000000 ffff88040cc27c00
> ffff88042ca30300
> [53063.287157]  0000000000000003 ffff8803cf337c48 ffffffffa04460af
> 0000000000000000
> [53063.287161] Call Trace:
> [53063.287167]  [<ffffffff814f1fd3>] ? dump_stack+0x4a/0x75
> [53063.287172]  [<ffffffff81069fc1>] ? warn_slowpath_common+0x81/0xb0
> [53063.287181]  [<ffffffffa04460af>] ? vb2_buffer_done+0x17f/0x1a0
> [videobuf2_core]
> [53063.287189]  [<ffffffffa044686e>] ? __vb2_queue_cancel+0x13e/0x170
> [videobuf2_core]
> [53063.287197]  [<ffffffffa044853d>] ?f+0x1d/0x50
> [videobuf2_core] vb2_internal_streamof
> [53063.287207]  [<ffffffffa0423163>] ? __video_do_ioctl+0x2f3/0x380
> [videodev]
> [53063.287219]  [<ffffffffa0422bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
> [53063.287229]  [<ffffffffa0422e70>] ? video_ioctl2+0x10/0x10 [videodev]
> [53063.287234]  [<ffffffff810bffbb>] ? futex_wait_queue_me+0xdb/0x140
> [53063.287244]  [<ffffffffa041e7df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
> [53063.287253]  [<ffffffffa042c7b6>] ? do_video_ioctl+0x246/0x1330
> [videodev]
> [53063.287259]  [<ffffffff810c0b9c>] ? futex_wake+0x7c/0x160
> [53063.287263]  [<ffffffff810c280c>] ? do_futex+0x12c/0xb00
> [53063.287268]  [<ffffffff814f714e>] ? _raw_spin_unlock_irq+0xe/0x30
> [53063.287272]  [<ffffffff8108e3be>] ? finish_task_switch+0x3e/0xe0
> [53063.287281]  [<ffffffffa042d922>] ? v4l2_compat_ioctl32+0x82/0xb8
> [videodev]
> [53063.287286]  [<ffffffff81185f32>] ? compat_SyS_ioctl+0x132/0x1120
> [53063.287291]  [<ffffffff810b5e1d>] ? ktime_get_ts+0x3d/0xd0
> [53063.287295]  [<ffffffff81085aa8>] ? posix_ktime_get_ts+0x8/0x10
> [53063.287299]  [<ffffffff81086960>] ? SyS_clock_gettime+0x60/0x80
> [53063.287305]  [<ffffffff814f9405>] ? cstar_dispatch+0x7/0x1a
> [53063.287308] ---[ end trace 03072f5e82f277f6 ]---
>
>
>
> At the end I checked the video settings in skype.
> What went wrong?
> How to fix?
>
>
> Kind regards,
> Udo
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Udo,
I am adding the mailing list as there are people who are experts in
this part of the kernel who
known more then me. I am going to explain my trace of this to you and
add it below for
the other developers to read about the issue here.

1.  The first part of the trace is going to vb2_internal_streamoff and
in this function we are calling the second function
of the trace which is vb2_buffer_done.
2. In function ,vb2_buffer_done we have a few WARN ONS and now to we
need to find the correct one
3. Since we are calling the function with the state,
VB2_BUF_STATE_ERROR  we are tracked to the first
if statement here as we are not streaming at this point

if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE))
 return;
We will hit your warn on and print out your message. This seems to be
correct at least to me but let's see what the other developers state
about my trace.

As for the other developers on the list seems to a miswritten call
before be are streaming this queue of data and I would recommend
moving the lines

q->streaming = 0;
q->start_streaming_called = 0;
q->queued_count = 0;
before the for loop that calls vb2_buffer_done inside it's self. I am
not sure if this is a correct fix through as I am new but if it is I
will write the patch
and sent it to the usb mailing list.
Regards Nick

Re: 3.15.6 USB issue with pwc cam

[Nick Krause]

On Sun, Aug 3, 2014 at 3:59 PM, Nick Krause <xerofoify@gmail.com> wrote:
> On Sat, Aug 2, 2014 at 9:10 AM, Udo van den Heuvel <udovdh@xs4all.nl> wrote:
>> Hello,
>>
>> I moved a PWC webcam to a USB3 port, and this happened:
>>
>> [53008.911811] usb 5-2: new full-speed USB device number 2 using xhci_hcd
>> [53009.213504] usb 5-2: New USB device found, idVendor=0471, idProduct=0311
>> [53009.213514] usb 5-2: New USB device strings: Mfr=0, Product=0,
>> SerialNumber=1
>> [53009.213519] usb 5-2: SerialNumber: 01690000A5000000
>> [53009.215547] pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II)
>> USB webcam detected.
>> [53009.846698] pwc: Registered as video0.
>> [53009.846814] input: PWC snapshot button as
>> /devices/pci0000:00/0000:00:07.0/0000:02:00.0/usb5/5-2/input/input7
>> [53009.847233] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53009.847242] usb 5-2: Not enough bandwidth for altsetting 1
>> [53009.847275] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53009.847285] usb 5-2: Not enough bandwidth for altsetting 2
>> [53009.847317] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53009.847323] usb 5-2: Not enough bandwidth for altsetting 3
>> [53009.847355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53009.847360] usb 5-2: Not enough bandwidth for altsetting 4
>> [53010.004876] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.004890] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.004896] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.004960] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.004988] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.004992] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.005066] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.005075] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.005079] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.005530] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.005540] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.005544] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.006438] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.006446] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.006450] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.007453] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.007461] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.007465] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.007567] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.007574] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.007578] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.007681] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.007689] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.007695] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.008126] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.008135] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.008140] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.008798] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.008808] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.008812] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.009576] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.009583] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.009588] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.009680] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.009689] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.009697] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.009978] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.009986] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.009990] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.010705] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.010716] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.010725] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.011350] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.011360] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.011366] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.012643] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.012655] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.012660] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.012758] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.012766] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.012771] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.013017] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.013025] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.013031] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.013793] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.013798] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.013803] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.014096] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.014102] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.014106] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.025999] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026007] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026010] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.026072] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026075] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026077] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.026119] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026122] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026125] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.026388] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026392] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026393] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.026588] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026591] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026592] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.026872] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026876] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026878] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.026908] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026911] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026912] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.026949] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.026951] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.026952] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.027119] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.027121] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.027122] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.027279] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.027281] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.027283] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.027550] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.027554] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.027556] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.027594] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.027597] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.027598] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.027675] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.027677] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.027679] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.027870] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.027874] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.027876] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.028157] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.028161] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.028163] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.028662] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.028666] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.028668] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.028709] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.028711] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.028713] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.028794] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.028797] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.028799] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.029075] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.029078] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.029079] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.029439] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.029442] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.029444] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038066] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038073] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038075] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038107] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038110] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038111] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038148] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038151] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038153] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038437] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038441] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038443] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038617] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038620] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038621] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038890] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038894] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038896] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038928] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038930] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038932] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.038964] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.038966] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.038968] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.039140] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.039142] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.039144] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.039296] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.039299] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.039300] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.039598] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.039601] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.039603] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.039654] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.039657] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.039658] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.039772] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.039775] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.039777] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.040044] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.040049] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.040051] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.040331] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.040334] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.040336] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.040838] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.040841] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.040843] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.040884] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.040886] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.040888] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.040971] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.040973] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.040975] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.041207] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.041209] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.041211] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.041450] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.041454] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.041455] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.050772] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.050788] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.050791] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.050825] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.050837] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.050839] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.050879] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.050882] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.050884] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.051166] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.051170] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.051172] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.051408] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.051412] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.051414] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.051805] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.051809] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.051811] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.051842] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.051845] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.051847] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.051880] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.051883] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.051885] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.052174] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.052177] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.052179] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.052390] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.052393] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.052395] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.052783] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.052787] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.052789] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.052887] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.052890] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.052892] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.052982] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.052984] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.052986] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.053262] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.053264] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.053266] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.053556] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.053559] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.053561] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.054205] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.054210] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.054212] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.054256] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.054259] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.054261] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.054355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.054358] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.054360] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.054612] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.054615] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.054617] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.054845] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.054848] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.054850] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.064272] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.064280] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.064283] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.064320] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.064324] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.064326] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.064369] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.064373] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.064375] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.064694] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.064698] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.064701] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.064921] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.064925] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.064927] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.065241] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.065245] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.065248] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.065281] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.065285] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.065287] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.065330] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.065333] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.065335] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.065611] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.065628] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.065634] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.066072] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.066078] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.066081] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.066528] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.066533] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.066535] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.066590] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.066594] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.066598] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.066707] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.066710] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.066713] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.067095] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.067100] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.067103] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.067457] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.067465] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.067470] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.068139] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.068144] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.068147] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.068230] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.068233] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.068236] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.068350] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.068354] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.068356] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.068659] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.068663] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.068665] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.068980] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.068985] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.068988] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.078360] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.078366] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.078368] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.078398] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.078400] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.078402] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.078498] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.078501] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.078503] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.078770] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.078774] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.078777] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.079011] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.079015] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.079017] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.079321] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.079324] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.079325] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.079356] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.079359] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.079361] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.079394] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.079396] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.079398] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.079661] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.079663] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.079665] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.079820] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.079822] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.079823] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.080214] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.080218] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.080219] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.080264] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.080266] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.080268] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.080355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.080357] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.080359] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.080561] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.080563] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.080564] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.080746] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.080748] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.080749] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.081155] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.081158] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.081160] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.081197] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.081199] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.081201] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.081274] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.081276] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.081278] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.081470] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.081473] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.081474] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53010.081701] xhci_hcd 0000:02:00.0: ERROR: unexpected command
>> completion code 0x11.
>> [53010.081706] usb 5-2: Not enough bandwidth for altsetting 1
>> [53010.081710] usb 5-2: 2:1: usb_set_interface failed (-22)
>> [53063.286759] ------------[ cut here ]------------
>> [53063.286783] WARNING: CPU: 2 PID: 3282 at
>> drivers/media/v4l2-core/videobuf2-core.c:2011
>> __vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
>> [53063.286786] Modules linked in: bnep bluetooth fuse edac_core
>> cpufreq_userspace nf_conntrack_netbios_ns nf_conntrack_broadcast
>> ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6
>> xt_conntrack iptable_filter ipt_MASQUERADE iptable_nat nf_conntrack_ipv4
>> nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip6table_filter
>> ip6_tables ip_tables x_tables eeprom it87 hwmon_vid ext2 ppdev kvm_amd
>> kvm snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi microcode
>> k10temp parport_serial pwc parport_pc videobuf2_vmalloc videobuf2_memops
>> v4l2_common parport videobuf2_core i2c_piix4 snd_hda_codec_realtek
>> videodev evdev cp210x snd_hda_codec_generic snd_hda_intel cdc_acm
>> usbserial snd_hda_controller snd_hda_codec snd_seq snd_seq_device
>> snd_pcm snd_timer snd button acpi_cpufreq nfsd auth_rpcgss oid_registry
>> [53063.286844]  nfs_acl lockd binfmt_misc sunrpc autofs4 hid_generic
>> usbhid radeon fbcon ehci_pci bitblit softcursor ehci_hcd font ohci_pci
>> ohci_hcd cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight sr_mod
>> cdrom drm_kms_helper ttm drm xhci_hcd fb fbdev
>> [53063.286876] CPU: 2 PID: 3282 Comm: skype Not tainted 3.15.6 #5
>> [53063.286879] Hardware name: Gigabyte Technology Co., Ltd. To be filled
>> by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
>> [53063.286882]  0000000000000000 000000001e19c613 ffffffff814f1fd3
>> 0000000000000000
>> [53063.286887]  ffffffff81069fc1 0000000000000000 0000000040045613
>> ffff880316167500
>> [53063.286892]  ffff88042ca30300 ffff8803cf337c48 ffffffffa0446832
>> ffff88042ca30000
>> [53063.286897] Call Trace:
>> [53063.286907]  [<ffffffff814f1fd3>] ? dump_stack+0x4a/0x75
>> [53063.286914]  [<ffffffff81069fc1>] ? warn_slowpath_common+0x81/0xb0
>> [53063.286924]  [<ffffffffa0446832>] ? __vb2_queue_cancel+0x102/0x170
>> [videobuf2_core]
>> [53063.286933]  [<ffffffffa044853d>] ? vb2_internal_streamoff+0x1d/0x50
>> [videobuf2_core]
>> [53063.286944]  [<ffffffffa0423163>] ? __video_do_ioctl+0x2f3/0x380
>> [videodev]
>> [53063.286957]  [<ffffffffa0422bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
>> [53063.286967]  [<ffffffffa0422e70>] ? video_ioctl2+0x10/0x10 [videodev]
>> [53063.286974]  [<ffffffff810bffbb>] ? futex_wait_queue_me+0xdb/0x140
>> [53063.286983]  [<ffffffffa041e7df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
>> [53063.286993]  [<ffffffffa042c7b6>] ? do_video_ioctl+0x246/0x1330
>> [videodev]
>> [53063.286998]  [<ffffffff810c0b9c>] ? futex_wake+0x7c/0x160
>> [53063.287003]  [<ffffffff810c280c>] ? do_futex+0x12c/0xb00
>> [53063.287008]  [<ffffffff814f714e>] ? _raw_spin_unlock_irq+0xe/0x30
>> [53063.287013]  [<ffffffff8108e3be>] ? finish_task_switch+0x3e/0xe0
>> [53063.287022]  [<ffffffffa042d922>] ? v4l2_compat_ioctl32+0x82/0xb8
>> [videodev]
>> [53063.287028]  [<ffffffff81185f32>] ? compat_SyS_ioctl+0x132/0x1120
>> [53063.287034]  [<ffffffff810b5e1d>] ? ktime_get_ts+0x3d/0xd0
>> [53063.287039]  [<ffffffff81085aa8>] ? posix_ktime_get_ts+0x8/0x10
>> [53063.287043]  [<ffffffff81086960>] ? SyS_clock_gettime+0x60/0x80
>> [53063.287049]  [<ffffffff814f9405>] ? cstar_dispatch+0x7/0x1a
>> [53063.287052] ---[ end trace 03072f5e82f277f5 ]---
>> [53063.287055] ------------[ cut here ]------------
>> [53063.287063] WARNING: CPU: 2 PID: 3282 at
>> drivers/media/v4l2-core/videobuf2-core.c:1095
>> vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
>> [53063.287066] Modules linked in: bnep bluetooth fuse edac_core
>> cpufreq_userspace nf_conntrack_netbios_ns nf_conntrack_broadcast
>> ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6
>> xt_conntrack iptable_filter ipt_MASQUERADE iptable_nat nf_conntrack_ipv4
>> nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip6table_filter
>> ip6_tables ip_tables x_tables eeprom it87 hwmon_vid ext2 ppdev kvm_amd
>> kvm snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi microcode
>> k10temp parport_serial pwc parport_pc videobuf2_vmalloc videobuf2_memops
>> v4l2_common parport videobuf2_core i2c_piix4 snd_hda_codec_realtek
>> videodev evdev cp210x snd_hda_codec_generic snd_hda_intel cdc_acm
>> usbserial snd_hda_controller snd_hda_codec snd_seq snd_seq_device
>> snd_pcm snd_timer snd button acpi_cpufreq nfsd auth_rpcgss oid_registry
>> [53063.287118]  nfs_acl lockd binfmt_misc sunrpc autofs4 hid_generic
>> usbhid radeon fbcon ehci_pci bitblit softcursor ehci_hcd font ohci_pci
>> ohci_hcd cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight sr_mod
>> cdrom drm_kms_helper ttm drm xhci_hcd fb fbdev
>> [53063.287143] CPU: 2 PID: 3282 Comm: skype Tainted: G        W
>> 3.15.6 #5
>> [53063.287146] Hardware name: Gigabyte Technology Co., Ltd. To be filled
>> by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
>> [53063.287148]  0000000000000000 000000001e19c613 ffffffff814f1fd3
>> 0000000000000000
>> [53063.287153]  ffffffff81069fc1 0000000000000000 ffff88040cc27c00
>> ffff88042ca30300
>> [53063.287157]  0000000000000003 ffff8803cf337c48 ffffffffa04460af
>> 0000000000000000
>> [53063.287161] Call Trace:
>> [53063.287167]  [<ffffffff814f1fd3>] ? dump_stack+0x4a/0x75
>> [53063.287172]  [<ffffffff81069fc1>] ? warn_slowpath_common+0x81/0xb0
>> [53063.287181]  [<ffffffffa04460af>] ? vb2_buffer_done+0x17f/0x1a0
>> [videobuf2_core]
>> [53063.287189]  [<ffffffffa044686e>] ? __vb2_queue_cancel+0x13e/0x170
>> [videobuf2_core]
>> [53063.287197]  [<ffffffffa044853d>] ?f+0x1d/0x50
>> [videobuf2_core] vb2_internal_streamof
>> [53063.287207]  [<ffffffffa0423163>] ? __video_do_ioctl+0x2f3/0x380
>> [videodev]
>> [53063.287219]  [<ffffffffa0422bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
>> [53063.287229]  [<ffffffffa0422e70>] ? video_ioctl2+0x10/0x10 [videodev]
>> [53063.287234]  [<ffffffff810bffbb>] ? futex_wait_queue_me+0xdb/0x140
>> [53063.287244]  [<ffffffffa041e7df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
>> [53063.287253]  [<ffffffffa042c7b6>] ? do_video_ioctl+0x246/0x1330
>> [videodev]
>> [53063.287259]  [<ffffffff810c0b9c>] ? futex_wake+0x7c/0x160
>> [53063.287263]  [<ffffffff810c280c>] ? do_futex+0x12c/0xb00
>> [53063.287268]  [<ffffffff814f714e>] ? _raw_spin_unlock_irq+0xe/0x30
>> [53063.287272]  [<ffffffff8108e3be>] ? finish_task_switch+0x3e/0xe0
>> [53063.287281]  [<ffffffffa042d922>] ? v4l2_compat_ioctl32+0x82/0xb8
>> [videodev]
>> [53063.287286]  [<ffffffff81185f32>] ? compat_SyS_ioctl+0x132/0x1120
>> [53063.287291]  [<ffffffff810b5e1d>] ? ktime_get_ts+0x3d/0xd0
>> [53063.287295]  [<ffffffff81085aa8>] ? posix_ktime_get_ts+0x8/0x10
>> [53063.287299]  [<ffffffff81086960>] ? SyS_clock_gettime+0x60/0x80
>> [53063.287305]  [<ffffffff814f9405>] ? cstar_dispatch+0x7/0x1a
>> [53063.287308] ---[ end trace 03072f5e82f277f6 ]---
>>
>>
>>
>> At the end I checked the video settings in skype.
>> What went wrong?
>> How to fix?
>>
>>
>> Kind regards,
>> Udo
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
> Udo,
> I am adding the mailing list as there are people who are experts in
> this part of the kernel who
> known more then me. I am going to explain my trace of this to you and
> add it below for
> the other developers to read about the issue here.
>
> 1.  The first part of the trace is going to vb2_internal_streamoff and
> in this function we are calling the second function
> of the trace which is vb2_buffer_done.
> 2. In function ,vb2_buffer_done we have a few WARN ONS and now to we
> need to find the correct one
> 3. Since we are calling the function with the state,
> VB2_BUF_STATE_ERROR  we are tracked to the first
> if statement here as we are not streaming at this point
>
> if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE))
>  return;
> We will hit your warn on and print out your message. This seems to be
> correct at least to me but let's see what the other developers state
> about my trace.
>
> As for the other developers on the list seems to a miswritten call
> before be are streaming this queue of data and I would recommend
> moving the lines
>
> q->streaming = 0;
> q->start_streaming_called = 0;
> q->queued_count = 0;
> before the for loop that calls vb2_buffer_done inside it's self. I am
> not sure if this is a correct fix through as I am new but if it is I
> will write the patch
> and sent it to the usb mailing list.
> Regards Nick

I am sending you my patch through email so you can see my change.If
you want to test in on a kernel tree , use a recent kernel and patch
it .  I don't remember off the top of my head if patch works with
gitpatches sent by email but if it doesn't just use git am on torvalds
git by cloning it with the command, git clone
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
linux-git and cd to linux-git
and apply using git am after running git add -f filename I am sending
you. After you can compile the kernel and see if you get a error
and my trace is wrong.
Sorry about the instructions and Regards,
Nick

3.15.8 USB issue with uvc cam

[Udo van den Heuvel]

[-- Attachment #1: Type: text/plain, Size: 3623 bytes --]

Hello,

I get WARNINGs when trying to use a Logitech C615 cam.
See attachment for full dmesg of errors but excerpt below:

[80346.835015] xhci_hcd 0000:02:00.0: ERROR: unexpected command
completion code 0x11.
[80346.835027] usb 6-2: Not enough bandwidth for altsetting 11
[80346.835137] ------------[ cut here ]------------
[80346.835155] WARNING: CPU: 3 PID: 20594 at
drivers/media/v4l2-core/videobuf2-core.c:2011
__vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
[80346.835158] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse
edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns
nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE
xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables
ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2
snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc
videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common
videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev
snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq
snd_seq_device microcode snd_pcm parport_serial parport_pc parport
snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd
auth_rpcgss oid_registry
[80346.835218]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic
usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon
bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit
xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80346.835250] CPU: 3 PID: 20594 Comm: skype Tainted: G        W
3.15.8 #6
[80346.835254] Hardware name: Gigabyte Technology Co., Ltd. To be filled
by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80346.835257]  0000000000000000 0000000079d580f4 ffffffff814f2373
0000000000000000
[80346.835262]  ffffffff81069fe1 0000000000000000 ffff88040ec532e8
0000000000000000
[80346.835267]  ffff88040ec530d8 ffff8803f0c46f00 ffffffffa041d832
ffff88040ec530d8
[80346.835272] Call Trace:
[80346.835283]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80346.835289]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80346.835299]  [<ffffffffa041d832>] ? __vb2_queue_cancel+0x102/0x170
[videobuf2_core]
[80346.835307]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50
[videobuf2_core]
[80346.835314]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80346.835321]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0
[uvcvideo]
[80346.835327]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580
[uvcvideo]
[80346.835339]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80346.835345]  [<ffffffffa06150b0>] ?
uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80346.835352]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80346.835356]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80346.835360]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80346.835367]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80346.835376]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80346.835386]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330
[videodev]
[80346.835392]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80346.835402]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8
[videodev]
[80346.835408]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80346.835414]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80346.835421]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80346.835424] ---[ end trace 44e3d272b6c91a71 ]---
[80346.835427] ------------[ cut here ]------------


What is wrong here?

Kind regards,
Udo



[-- Attachment #2: dmesguvc.txt --]
[-- Type: text/plain, Size: 50320 bytes --]

[80346.835015] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[80346.835027] usb 6-2: Not enough bandwidth for altsetting 11
[80346.835137] ------------[ cut here ]------------
[80346.835155] WARNING: CPU: 3 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
[80346.835158] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80346.835218]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80346.835250] CPU: 3 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80346.835254] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80346.835257]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80346.835262]  ffffffff81069fe1 0000000000000000 ffff88040ec532e8 0000000000000000
[80346.835267]  ffff88040ec530d8 ffff8803f0c46f00 ffffffffa041d832 ffff88040ec530d8
[80346.835272] Call Trace:
[80346.835283]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80346.835289]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80346.835299]  [<ffffffffa041d832>] ? __vb2_queue_cancel+0x102/0x170 [videobuf2_core]
[80346.835307]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80346.835314]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80346.835321]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80346.835327]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80346.835339]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80346.835345]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80346.835352]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80346.835356]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80346.835360]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80346.835367]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80346.835376]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80346.835386]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80346.835392]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80346.835402]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80346.835408]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80346.835414]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80346.835421]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80346.835424] ---[ end trace 44e3d272b6c91a71 ]---
[80346.835427] ------------[ cut here ]------------
[80346.835434] WARNING: CPU: 3 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80346.835436] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80346.835491]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80346.835516] CPU: 3 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80346.835519] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80346.835521]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80346.835526]  ffffffff81069fe1 0000000000000000 ffff8803f1ec4000 ffff88040ec530d8
[80346.835531]  0000000000000003 ffff8803f0c46f00 ffffffffa041d0af 0000000000000000
[80346.835535] Call Trace:
[80346.835541]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80346.835546]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80346.835555]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80346.835562]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80346.835570]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80346.835576]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80346.835583]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80346.835589]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80346.835600]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80346.835606]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80346.835611]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80346.835616]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80346.835619]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80346.835625]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80346.835634]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80346.835654]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80346.835659]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80346.835669]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80346.835674]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80346.835679]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80346.835685]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80346.835753] ---[ end trace 44e3d272b6c91a72 ]---
[80346.835756] ------------[ cut here ]------------
[80346.835764] WARNING: CPU: 3 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80346.835766] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80346.835821]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80346.835846] CPU: 3 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80346.835849] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80346.835851]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80346.835856]  ffffffff81069fe1 0000000000000001 ffff880395565000 ffff88040ec530d8
[80346.835861]  0000000000000003 ffff8803f0c46f00 ffffffffa041d0af 0000000000000001
[80346.835865] Call Trace:
[80346.835871]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80346.835876]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80346.835885]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80346.835892]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80346.835900]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80346.835906]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80346.835913]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80346.835918]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80346.835929]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80346.835935]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80346.835941]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80346.835945]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80346.835949]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80346.835954]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80346.835963]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80346.835972]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80346.835978]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80346.835987]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80346.835992]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80346.835998]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80346.836004]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80346.836007] ---[ end trace 44e3d272b6c91a73 ]---
[80346.836009] ------------[ cut here ]------------
[80346.836017] WARNING: CPU: 3 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80346.836019] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80346.836076]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80346.836116] CPU: 3 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80346.836118] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80346.836120]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80346.836125]  ffffffff81069fe1 0000000000000002 ffff880408402c00 ffff88040ec530d8
[80346.836129]  0000000000000003 ffff8803f0c46f00 ffffffffa041d0af 0000000000000002
[80346.836134] Call Trace:
[80346.836139]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80346.836144]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80346.836153]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80346.836160]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80346.836168]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80346.836174]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80346.836180]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80346.836186]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80346.836196]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80346.836203]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80346.836208]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80346.836212]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80346.836216]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80346.836221]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80346.836231]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80346.836240]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80346.836245]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80346.836255]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80346.836259]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80346.836265]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80346.836271]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80346.836274] ---[ end trace 44e3d272b6c91a74 ]---
[80346.836277] ------------[ cut here ]------------
[80346.836284] WARNING: CPU: 3 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80346.836286] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80346.836340]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80346.836365] CPU: 3 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80346.836367] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80346.836369]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80346.836374]  ffffffff81069fe1 0000000000000003 ffff88007c8d0c00 ffff88040ec530d8
[80346.836378]  0000000000000003 ffff8803f0c46f00 ffffffffa041d0af 0000000000000003
[80346.836383] Call Trace:
[80346.836388]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80346.836393]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80346.836401]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80346.836409]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80346.836417]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80346.836422]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80346.836429]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80346.836435]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80346.836445]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80346.836451]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80346.836457]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80346.836461]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80346.836465]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80346.836470]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80346.836479]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80346.836489]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80346.836494]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80346.836503]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80346.836508]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80346.836514]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80346.836520]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80346.836523] ---[ end trace 44e3d272b6c91a75 ]---
[80349.059300] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[80349.059315] usb 6-2: Not enough bandwidth for altsetting 11
[80349.059484] ------------[ cut here ]------------
[80349.059506] WARNING: CPU: 2 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
[80349.059509] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80349.059574]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80349.059594] CPU: 2 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80349.059596] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80349.059598]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80349.059601]  ffffffff81069fe1 0000000000000000 ffff88040ec532e8 0000000000000000
[80349.059603]  ffff88040ec530d8 ffff88041ca33a00 ffffffffa041d832 ffff88040ec530d8
[80349.059606] Call Trace:
[80349.059613]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80349.059617]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80349.059621]  [<ffffffffa041d832>] ? __vb2_queue_cancel+0x102/0x170 [videobuf2_core]
[80349.059625]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80349.059628]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80349.059630]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80349.059632]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80349.059638]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80349.059641]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80349.059643]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80349.059646]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80349.059647]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80349.059650]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80349.059654]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80349.059658]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80349.059660]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80349.059664]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80349.059667]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80349.059670]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80349.059673]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80349.059674] ---[ end trace 44e3d272b6c91a76 ]---
[80349.059676] ------------[ cut here ]------------
[80349.059678] WARNING: CPU: 2 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80349.059679] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80349.059699]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80349.059709] CPU: 2 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80349.059710] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80349.059710]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80349.059712]  ffffffff81069fe1 0000000000000000 ffff8803f3ea8800 ffff88040ec530d8
[80349.059714]  0000000000000003 ffff88041ca33a00 ffffffffa041d0af 0000000000000000
[80349.059715] Call Trace:
[80349.059718]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80349.059719]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80349.059723]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80349.059726]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80349.059728]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80349.059731]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80349.059733]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80349.059735]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80349.059739]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80349.059741]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80349.059743]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80349.059745]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80349.059746]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80349.059748]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80349.059752]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80349.059755]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80349.059757]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80349.059761]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80349.059762]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80349.059764]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80349.059766]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80349.059768] ---[ end trace 44e3d272b6c91a77 ]---
[80349.059769] ------------[ cut here ]------------
[80349.059771] WARNING: CPU: 2 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80349.059772] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80349.059792]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80349.059801] CPU: 2 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80349.059802] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80349.059803]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80349.059805]  ffffffff81069fe1 0000000000000001 ffff88037dd0f800 ffff88040ec530d8
[80349.059806]  0000000000000003 ffff88041ca33a00 ffffffffa041d0af 0000000000000001
[80349.059808] Call Trace:
[80349.059810]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80349.059812]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80349.059815]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80349.059818]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80349.059821]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80349.059823]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80349.059825]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80349.059827]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80349.059831]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80349.059834]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80349.059836]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80349.059837]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80349.059839]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80349.059840]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80349.059844]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80349.059847]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80349.059849]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80349.059853]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80349.059855]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80349.059857]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80349.059859]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80349.059860] ---[ end trace 44e3d272b6c91a78 ]---
[80349.059861] ------------[ cut here ]------------
[80349.059864] WARNING: CPU: 2 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80349.059865] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80349.059885]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80349.059894] CPU: 2 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80349.059894] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80349.059895]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80349.059897]  ffffffff81069fe1 0000000000000002 ffff88007c95d800 ffff88040ec530d8
[80349.059898]  0000000000000003 ffff88041ca33a00 ffffffffa041d0af 0000000000000002
[80349.059900] Call Trace:
[80349.059902]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80349.059904]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80349.059907]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80349.059910]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80349.059913]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80349.059915]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80349.059917]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80349.059919]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80349.059923]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80349.059925]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80349.059927]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80349.059929]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80349.059930]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80349.059932]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80349.059936]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80349.059939]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80349.059941]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80349.059945]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80349.059946]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80349.059948]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80349.059951]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80349.059952] ---[ end trace 44e3d272b6c91a79 ]---
[80349.059953] ------------[ cut here ]------------
[80349.059955] WARNING: CPU: 2 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80349.059956] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80349.059977]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80349.059986] CPU: 2 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80349.059987] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80349.059987]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80349.059989]  ffffffff81069fe1 0000000000000003 ffff8803f3ea2c00 ffff88040ec530d8
[80349.059991]  0000000000000003 ffff88041ca33a00 ffffffffa041d0af 0000000000000003
[80349.059992] Call Trace:
[80349.059994]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80349.059996]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80349.059999]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80349.060002]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80349.060005]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80349.060007]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80349.060009]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80349.060011]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80349.060015]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80349.060017]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80349.060019]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80349.060021]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80349.060022]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80349.060024]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80349.060027]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80349.060031]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80349.060033]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80349.060036]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80349.060038]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80349.060040]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80349.060042]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80349.060043] ---[ end trace 44e3d272b6c91a7a ]---
[80350.320279] xhci_hcd 0000:02:00.0: ERROR: unexpected command completion code 0x11.
[80350.320295] usb 6-2: Not enough bandwidth for altsetting 11
[80350.320459] ------------[ cut here ]------------
[80350.320479] WARNING: CPU: 0 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
[80350.320484] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80350.320561]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80350.320597] CPU: 0 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80350.320601] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80350.320604]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80350.320609]  ffffffff81069fe1 0000000000000000 ffff88040ec532e8 0000000000000000
[80350.320614]  ffff88040ec530d8 ffff8803f1ecc300 ffffffffa041d832 ffff88040ec530d8
[80350.320619] Call Trace:
[80350.320629]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80350.320636]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80350.320646]  [<ffffffffa041d832>] ? __vb2_queue_cancel+0x102/0x170 [videobuf2_core]
[80350.320655]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80350.320662]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80350.320669]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80350.320675]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80350.320687]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80350.320693]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80350.320700]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80350.320705]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80350.320709]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80350.320715]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80350.320725]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80350.320735]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80350.320741]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80350.320751]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80350.320757]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80350.320763]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80350.320770]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80350.320774] ---[ end trace 44e3d272b6c91a7b ]---
[80350.320776] ------------[ cut here ]------------
[80350.320784] WARNING: CPU: 0 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80350.320786] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80350.320840]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80350.320866] CPU: 0 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80350.320868] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80350.320871]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80350.320876]  ffffffff81069fe1 0000000000000000 ffff880340ab0000 ffff88040ec530d8
[80350.320880]  0000000000000003 ffff8803f1ecc300 ffffffffa041d0af 0000000000000000
[80350.320884] Call Trace:
[80350.320890]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80350.320896]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80350.320904]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80350.320912]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80350.320920]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80350.320926]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80350.320932]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80350.320938]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80350.320948]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80350.320954]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80350.320960]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80350.320964]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80350.320968]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80350.320973]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80350.320983]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80350.320992]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80350.320998]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80350.321007]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80350.321012]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80350.321018]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80350.321024]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80350.321027] ---[ end trace 44e3d272b6c91a7c ]---
[80350.321030] ------------[ cut here ]------------
[80350.321037] WARNING: CPU: 0 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80350.321039] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80350.321093]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80350.321118] CPU: 0 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80350.321120] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80350.321123]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80350.321127]  ffffffff81069fe1 0000000000000001 ffff8803a111a400 ffff88040ec530d8
[80350.321132]  0000000000000003 ffff8803f1ecc300 ffffffffa041d0af 0000000000000001
[80350.321136] Call Trace:
[80350.321142]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80350.321147]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80350.321155]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80350.321162]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80350.321170]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80350.321176]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80350.321182]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80350.321188]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80350.321199]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80350.321205]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80350.321210]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80350.321215]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80350.321219]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80350.321224]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80350.321233]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80350.321242]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80350.321248]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80350.321257]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80350.321262]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80350.321268]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80350.321273]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80350.321276] ---[ end trace 44e3d272b6c91a7d ]---
[80350.321279] ------------[ cut here ]------------
[80350.321286] WARNING: CPU: 0 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80350.321288] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80350.321342]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80350.321366] CPU: 0 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80350.321369] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80350.321371]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80350.321375]  ffffffff81069fe1 0000000000000002 ffff8803a1089400 ffff88040ec530d8
[80350.321380]  0000000000000003 ffff8803f1ecc300 ffffffffa041d0af 0000000000000002
[80350.321384] Call Trace:
[80350.321389]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80350.321394]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80350.321402]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80350.321410]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80350.321418]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80350.321423]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80350.321430]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80350.321436]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80350.321446]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80350.321452]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80350.321458]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80350.321462]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80350.321466]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80350.321471]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80350.321480]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80350.321490]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80350.321495]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80350.321505]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80350.321509]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80350.321515]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80350.321521]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80350.321524] ---[ end trace 44e3d272b6c91a7e ]---
[80350.321527] ------------[ cut here ]------------
[80350.321534] WARNING: CPU: 0 PID: 20594 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
[80350.321536] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2 snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq snd_seq_device microcode snd_pcm parport_serial parport_pc parport snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd auth_rpcgss oid_registry
[80350.321590]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
[80350.321614] CPU: 0 PID: 20594 Comm: skype Tainted: G        W     3.15.8 #6
[80350.321617] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
[80350.321619]  0000000000000000 0000000079d580f4 ffffffff814f2373 0000000000000000
[80350.321623]  ffffffff81069fe1 0000000000000003 ffff880082e29c00 ffff88040ec530d8
[80350.321627]  0000000000000003 ffff8803f1ecc300 ffffffffa041d0af 0000000000000003
[80350.321632] Call Trace:
[80350.321637]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
[80350.321642]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
[80350.321650]  [<ffffffffa041d0af>] ? vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]
[80350.321658]  [<ffffffffa041d86e>] ? __vb2_queue_cancel+0x13e/0x170 [videobuf2_core]
[80350.321665]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50 [videobuf2_core]
[80350.321671]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
[80350.321678]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0 [uvcvideo]
[80350.321684]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580 [uvcvideo]
[80350.321694]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
[80350.321700]  [<ffffffffa06150b0>] ? uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
[80350.321706]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
[80350.321710]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
[80350.321714]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
[80350.321719]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
[80350.321728]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
[80350.321737]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330 [videodev]
[80350.321743]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
[80350.321753]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8 [videodev]
[80350.321757]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
[80350.321763]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
[80350.321769]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
[80350.321772] ---[ end trace 44e3d272b6c91a7f ]---

Re: 3.15.8 USB issue with uvc cam

[Udo van den Heuvel]

Hello,

The Logitech C615 works OK if moved away from a USB3 port into a
non-USB3 port.
So it appears a USB3 issue.
Is 'xhci_hcd 0000:02:00.0: ERROR: unexpected command
completion code 0x11' a possible root cause?

My board has:

# lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models
10h-1fh) I/O Memory Management Unit
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] Trinity [Radeon HD 7660D]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity
HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Root Port
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
Controller (rev 03)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI
Controller (rev 03)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA
Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI
Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller
(rev 14)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia
Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge
(rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge
(rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI
Controller (rev 11)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h
(Models 10h-1fh) Processor Function 5
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host
Controller (rev 01)
03:06.0 Serial controller: MosChip Semiconductor Technology Ltd. PCI
9835 Multi-I/O Controller (rev 01)


And the Etron EJ168 is the only USB3 provider here?
How can we fix this issue?

Kind regards,
Udo


On 2014-08-08 05:42, Udo van den Heuvel wrote:
> Hello,
> 
> I get WARNINGs when trying to use a Logitech C615 cam.
> See attachment for full dmesg of errors but excerpt below:
> 
> [80346.835015] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [80346.835027] usb 6-2: Not enough bandwidth for altsetting 11
> [80346.835137] ------------[ cut here ]------------
> [80346.835155] WARNING: CPU: 3 PID: 20594 at
> drivers/media/v4l2-core/videobuf2-core.c:2011
> __vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
> [80346.835158] Modules linked in: uvcvideo cdc_acm bnep bluetooth fuse
> edac_core cpufreq_userspace ipt_REJECT nf_conntrack_netbios_ns
> nf_conntrack_broadcast iptable_filter ip6t_REJECT ipt_MASQUERADE
> xt_tcpudp nf_conntrack_ipv6 iptable_nat nf_defrag_ipv6 nf_conntrack_ipv4
> nf_defrag_ipv4 nf_nat_ipv4 nf_nat xt_conntrack nf_conntrack ip_tables
> ip6table_filter ip6_tables x_tables eeprom it87 hwmon_vid ext2
> snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi ppdev pwc
> videobuf2_vmalloc videobuf2_memops kvm_amd kvm v4l2_common
> videobuf2_core snd_hda_codec_realtek snd_hda_codec_generic videodev
> snd_hda_intel snd_hda_controller cp210x snd_hda_codec usbserial snd_seq
> snd_seq_device microcode snd_pcm parport_serial parport_pc parport
> snd_timer k10temp snd evdev i2c_piix4 button acpi_cpufreq nfsd
> auth_rpcgss oid_registry
> [80346.835218]  nfs_acl lockd sunrpc binfmt_misc autofs4 hid_generic
> usbhid ohci_pci ehci_pci ehci_hcd ohci_hcd radeon sr_mod cdrom fbcon
> bitblit cfbfillrect softcursor cfbimgblt cfbcopyarea font i2c_algo_bit
> xhci_hcd backlight drm_kms_helper ttm drm fb fbdev
> [80346.835250] CPU: 3 PID: 20594 Comm: skype Tainted: G        W
> 3.15.8 #6
> [80346.835254] Hardware name: Gigabyte Technology Co., Ltd. To be filled
> by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
> [80346.835257]  0000000000000000 0000000079d580f4 ffffffff814f2373
> 0000000000000000
> [80346.835262]  ffffffff81069fe1 0000000000000000 ffff88040ec532e8
> 0000000000000000
> [80346.835267]  ffff88040ec530d8 ffff8803f0c46f00 ffffffffa041d832
> ffff88040ec530d8
> [80346.835272] Call Trace:
> [80346.835283]  [<ffffffff814f2373>] ? dump_stack+0x4a/0x75
> [80346.835289]  [<ffffffff81069fe1>] ? warn_slowpath_common+0x81/0xb0
> [80346.835299]  [<ffffffffa041d832>] ? __vb2_queue_cancel+0x102/0x170
> [videobuf2_core]
> [80346.835307]  [<ffffffffa041f53d>] ? vb2_internal_streamoff+0x1d/0x50
> [videobuf2_core]
> [80346.835314]  [<ffffffffa06140d5>] ? uvc_queue_enable+0x75/0xb0 [uvcvideo]
> [80346.835321]  [<ffffffffa0619091>] ? uvc_video_enable+0x141/0x1a0
> [uvcvideo]
> [80346.835327]  [<ffffffffa0615e1f>] ? uvc_v4l2_do_ioctl+0xd6f/0x1580
> [uvcvideo]
> [80346.835339]  [<ffffffffa0448bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
> [80346.835345]  [<ffffffffa06150b0>] ?
> uvc_v4l2_set_streamparm.isra.12+0x1c0/0x1c0 [uvcvideo]
> [80346.835352]  [<ffffffff81091d9f>] ? preempt_count_add+0x3f/0x90
> [80346.835356]  [<ffffffff814f73ee>] ? _raw_spin_lock+0xe/0x30
> [80346.835360]  [<ffffffff814f748d>] ? _raw_spin_unlock+0xd/0x30
> [80346.835367]  [<ffffffff8110f77e>] ? __pte_alloc+0xce/0x170
> [80346.835376]  [<ffffffffa04447df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
> [80346.835386]  [<ffffffffa04527b6>] ? do_video_ioctl+0x246/0x1330
> [videodev]
> [80346.835392]  [<ffffffff8111999a>] ? mmap_region+0x15a/0x5a0
> [80346.835402]  [<ffffffffa0453922>] ? v4l2_compat_ioctl32+0x82/0xb8
> [videodev]
> [80346.835408]  [<ffffffff81186182>] ? compat_SyS_ioctl+0x132/0x1120
> [80346.835414]  [<ffffffff81105833>] ? vm_mmap_pgoff+0xe3/0x120
> [80346.835421]  [<ffffffff814f97c5>] ? cstar_dispatch+0x7/0x1a
> [80346.835424] ---[ end trace 44e3d272b6c91a71 ]---
> [80346.835427] ------------[ cut here ]------------
> 
> 
> What is wrong here?
> 
> Kind regards,
> Udo
> 
>