[PATCH] arm: tegra: apalis/colibri t30: fix on-module 5v0 supplies

[PATCH] arm: tegra: apalis/colibri t30: fix on-module 5v0 supplies

[Marcel Ziswiler]

Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised
that the current device tree source includes for our modules only
happen to work due to referencing the on-carrier 5v0 supply from USB
which is not at all available on-module. The modules actually contain
TPS60150 charge pumps to generate the PMIC required 5 volts from the
one and only 3.3 volt module supply. This patch fixes this.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
---
 arch/arm/boot/dts/tegra30-apalis.dtsi  | 11 ++++++++++-
 arch/arm/boot/dts/tegra30-colibri.dtsi | 11 ++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 8adaa78..a5446cb 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -423,7 +423,7 @@
 			vcc4-supply = <&sys_3v3_reg>;
 			vcc5-supply = <&sys_3v3_reg>;
 			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&sys_5v0_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
 			vccio-supply = <&sys_3v3_reg>;
 
 			regulators {
@@ -674,5 +674,14 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index bf16f8e..c4ed1be 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -201,7 +201,7 @@
 			vcc4-supply = <&sys_3v3_reg>;
 			vcc5-supply = <&sys_3v3_reg>;
 			vcc6-supply = <&vio_reg>;
-			vcc7-supply = <&sys_5v0_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
 			vccio-supply = <&sys_3v3_reg>;
 
 			regulators {
@@ -373,5 +373,14 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
 	};
 };
-- 
1.9.3

Re: [PATCH] arm: tegra: apalis/colibri t30: fix on-module 5v0 supplies

[Stephen Warren]

On 08/22/2014 09:06 AM, Marcel Ziswiler wrote:
> Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised
> that the current device tree source includes for our modules only
> happen to work due to referencing the on-carrier 5v0 supply from USB
> which is not at all available on-module. The modules actually contain
> TPS60150 charge pumps to generate the PMIC required 5 volts from the
> one and only 3.3 volt module supply. This patch fixes this.

I've forwarded this to the ARM SoC maintainers as a fix for v3.17.