Re: [PATCH net-next v2 00/14] net: dsa: add support for MT7988

["Arınç ÜNAL" <arinc.unal@arinc9.com>]

On 3.04.2023 04:16, Daniel Golle wrote:
> The MediaTek MT7988 SoC comes with a built-in switch very similar to
> previous MT7530 and MT7531. However, the switch address space is mapped
> into the SoCs memory space rather than being connected via MDIO.
> Using MMIO simplifies register access and also removes the need for a bus
> lock, and for that reason also makes interrupt handling more light-weight.
> 
> Note that this is different from previous SoCs like MT7621 and MT7623N
> which also came with an integrated MT7530-like switch which yet had to be
> accessed via MDIO.
> 
> Split-off the part of the driver registering an MDIO driver, then add
> another module acting as MMIO/platform driver.
> 
> The whole series has been tested on various MediaTek boards:
>   * MT7623A + MT7530 (BPi-R2)
>   * MT7986A + MT7531 (BPi-R3)
>   * MT7988A reference board

You did not address the incorrect information I pointed out here. Now 
that the patch series is applied, people reading this on the merge 
branch commit will be misled by the misinformation.

> 
> Changes since v1:
>   * use 'internal' PHY mode where appropriate
>   * use regmap_update_bits in mt7530_rmw
>   * improve dt-bindings

As a maintainer of the said dt-bindings, I pointed out almost 7 things 
for you to change. Of those 7 points, you only did one, a trivial 
grammar change. The patch series is applied now so one of us maintainers 
(you are one too now) need to fix it with additional patches.

Arınç