mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 03/11] mmc: sdhci-omap: Workaround for Errata i843
Date: Thu, 15 Mar 2018 16:24:53 +0200	[thread overview]
Message-ID: <5410610d-4874-9e66-0d5a-966a73422457@intel.com> (raw)
In-Reply-To: <20180307132020.30951-4-kishon@ti.com>

On 07/03/18 15:20, Kishon Vijay Abraham I wrote:
> Errata i843 in AM572x Sitara Processors Silicon Revision 2.0, 1.1
> (SPRZ429K July 2014–Revised March 2017 [1]) mentions
> PG 1.0/1.1 silicon has limitations w.r.t frequencies at which MMC1/2/3
> can operate.
> 
> Use soc_device_match() to identify rev 1.0/1.1 silicon and
> override mmc->f_max according to the errata workaround.
> "max-frequency" dt property cannot be used since the device
> tree is added for rev 2.0 silicon.
> 
> soc_device_match() is also used in order to get the IODelay values
> for rev 1.0/1.1 silicon.
> 
> [1] -> http://www.ti.com/lit/er/sprz429k/sprz429k.pdf
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/sdhci-omap.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 0c40b13fb67d..fbc20a4fbb23 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -26,6 +26,7 @@
>  #include <linux/pm_runtime.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/pinctrl/consumer.h>
> +#include <linux/sys_soc.h>
>  
>  #include "sdhci-pltfm.h"
>  
> @@ -100,6 +101,7 @@ struct sdhci_omap_data {
>  };
>  
>  struct sdhci_omap_host {
> +	char			*version;
>  	void __iomem		*base;
>  	struct device		*dev;
>  	struct	regulator	*pbias;
> @@ -733,12 +735,21 @@ static struct pinctrl_state
>  				  u32 *caps, u32 capmask)
>  {
>  	struct device *dev = omap_host->dev;
> +	char *version = omap_host->version;
>  	struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
> +	char str[20];
>  
>  	if (!(*caps & capmask))
>  		goto ret;
>  
> -	pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
> +	if (version) {
> +		snprintf(str, 20, "%s-%s", mode, version);
> +		pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, str);
> +	}
> +
> +	if (IS_ERR(pinctrl_state))
> +		pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
> +
>  	if (IS_ERR(pinctrl_state)) {
>  		dev_err(dev, "no pinctrl state for %s mode", mode);
>  		*caps &= ~capmask;
> @@ -830,6 +841,16 @@ static int sdhci_omap_config_iodelay_pinctrl_state(struct sdhci_omap_host
>  	return 0;
>  }
>  
> +static const struct soc_device_attribute sdhci_omap_soc_devices[] = {
> +	{
> +		.machine = "DRA7[45]*",
> +		.revision = "ES1.[01]",
> +	},
> +	{
> +		/* sentinel */
> +	}
> +};
> +
>  static int sdhci_omap_probe(struct platform_device *pdev)
>  {
>  	int ret;
> @@ -841,6 +862,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
>  	struct mmc_host *mmc;
>  	const struct of_device_id *match;
>  	struct sdhci_omap_data *data;
> +	const struct soc_device_attribute *soc;
>  
>  	match = of_match_device(omap_sdhci_match, dev);
>  	if (!match)
> @@ -875,6 +897,17 @@ static int sdhci_omap_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_pltfm_free;
>  
> +	soc = soc_device_match(sdhci_omap_soc_devices);
> +	if (soc) {
> +		omap_host->version = "rev11";
> +		if (!strcmp(dev_name(dev), "4809c000.mmc"))
> +			mmc->f_max = 96000000;
> +		if (!strcmp(dev_name(dev), "480b4000.mmc"))
> +			mmc->f_max = 48000000;
> +		if (!strcmp(dev_name(dev), "480ad000.mmc"))
> +			mmc->f_max = 48000000;
> +	}
> +
>  	pltfm_host->clk = devm_clk_get(dev, "fck");
>  	if (IS_ERR(pltfm_host->clk)) {
>  		ret = PTR_ERR(pltfm_host->clk);
> 

  reply	other threads:[~2018-03-15 14:25 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-07 13:20 [PATCH v3 00/11] mmc: sdhci-omap: Add UHS/HS200 mode support Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 01/11] mmc: sdhci-omap: Fix when capabilities are obtained from SDHCI_CAPABILITIES reg Kishon Vijay Abraham I
2018-03-15 14:17   ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 02/11] mmc: sdhci-omap: Remove setting ADMA capability in driver Kishon Vijay Abraham I
2018-03-15 14:18   ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 03/11] mmc: sdhci-omap: Workaround for Errata i843 Kishon Vijay Abraham I
2018-03-15 14:24   ` Adrian Hunter [this message]
2018-03-07 13:20 ` [PATCH v3 04/11] mmc: sdhci-omap: Invoke sdhci_get_of_property to read sdhci dt properties Kishon Vijay Abraham I
2018-03-15 14:27   ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 05/11] mmc: sdhci: Disable HS200 mode if controller can't support 1.8v Kishon Vijay Abraham I
2018-03-15 10:58   ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 06/11] mmc: sdhci: Add quirk to disable HW timeout Kishon Vijay Abraham I
2018-03-15 11:26   ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 07/11] mmc: sdhci: Program a relatively accurate SW timeout value Kishon Vijay Abraham I
2018-03-15 13:13   ` Adrian Hunter
2018-03-16  6:29     ` Kishon Vijay Abraham I
2018-03-16 14:21       ` Adrian Hunter
2018-03-19  9:20         ` Kishon Vijay Abraham I
2018-03-19 10:00           ` Adrian Hunter
2018-03-19 10:19             ` Kishon Vijay Abraham I
2018-03-20  9:48               ` Kishon Vijay Abraham I
2018-04-04 12:48                 ` Adrian Hunter
2018-03-07 13:20 ` [PATCH v3 08/11] mmc: sdhci-omap: Workaround for Errata i834 Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 09/11] dt-bindings: sdhci-omap: Add K2G specific binding Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 10/11] mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC Kishon Vijay Abraham I
2018-03-07 13:20 ` [PATCH v3 11/11] mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq Kishon Vijay Abraham I
2018-03-15 14:34   ` Adrian Hunter
2018-03-07 15:12 ` [PATCH v3 00/11] mmc: sdhci-omap: Add UHS/HS200 mode support Tony Lindgren
2018-03-15  8:47 ` Ulf Hansson
2018-03-15  8:52   ` Adrian Hunter
2018-03-15 10:02     ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5410610d-4874-9e66-0d5a-966a73422457@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®