* [REGRESSION] No serial console output on BeagleBone Black
@ 2015-05-25 14:24 Bartosz Golaszewski
2015-05-25 15:03 ` Tero Kristo
0 siblings, 1 reply; 3+ messages in thread
From: Bartosz Golaszewski @ 2015-05-25 14:24 UTC (permalink / raw)
To: linux-omap, linux-arm-kernel, LKML, Tero Kristo, Tony Lindgren,
Benoit Cousson
Hi Tero,
I tried booting a BeagleBone Black Rev C with current git, but got no
output after u-boot's "Starting kernel ...". Bisect points at commit
e3bc5358 ARM: dts: am33xx: add minimal l4 bus layout with control
module support. Let me know if you need any more info.
Best regards,
Bartosz Golaszewski
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [REGRESSION] No serial console output on BeagleBone Black
2015-05-25 14:24 [REGRESSION] No serial console output on BeagleBone Black Bartosz Golaszewski
@ 2015-05-25 15:03 ` Tero Kristo
2015-05-25 16:28 ` Bartosz Golaszewski
0 siblings, 1 reply; 3+ messages in thread
From: Tero Kristo @ 2015-05-25 15:03 UTC (permalink / raw)
To: Bartosz Golaszewski, linux-omap, linux-arm-kernel, LKML,
Tony Lindgren, Benoit Cousson
On 05/25/2015 05:24 PM, Bartosz Golaszewski wrote:
> Hi Tero,
>
> I tried booting a BeagleBone Black Rev C with current git, but got no
> output after u-boot's "Starting kernel ...". Bisect points at commit
> e3bc5358 ARM: dts: am33xx: add minimal l4 bus layout with control
> module support. Let me know if you need any more info.
Have you updated your DTB file recently? BBB seems to be booting nicely
for me.
-Tero
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [REGRESSION] No serial console output on BeagleBone Black
2015-05-25 15:03 ` Tero Kristo
@ 2015-05-25 16:28 ` Bartosz Golaszewski
0 siblings, 0 replies; 3+ messages in thread
From: Bartosz Golaszewski @ 2015-05-25 16:28 UTC (permalink / raw)
To: Tero Kristo
Cc: linux-omap, linux-arm-kernel, LKML, Tony Lindgren, Benoit Cousson
2015-05-25 17:03 GMT+02:00 Tero Kristo <t-kristo@ti.com>:
> On 05/25/2015 05:24 PM, Bartosz Golaszewski wrote:
>>
>> Hi Tero,
>>
>> I tried booting a BeagleBone Black Rev C with current git, but got no
>> output after u-boot's "Starting kernel ...". Bisect points at commit
>> e3bc5358 ARM: dts: am33xx: add minimal l4 bus layout with control
>> module support. Let me know if you need any more info.
>
>
> Have you updated your DTB file recently? BBB seems to be booting nicely for
> me.
Sorry for the noise - I double-checked everything from scratch and it
was apparently the zImage that wasn't getting updated properly. It
boots fine now.
Thanks,
Bartosz Golaszewski
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-05-25 16:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-05-25 14:24 [REGRESSION] No serial console output on BeagleBone Black Bartosz Golaszewski
2015-05-25 15:03 ` Tero Kristo
2015-05-25 16:28 ` Bartosz Golaszewski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®