Re: 3.12: ethernet controller missing after resuming from suspend to RAM

["Rafael J. Wysocki" <rjw@rjwysocki.net>]

On Thursday, February 06, 2014 10:08:25 PM Peter Wu wrote:
> On Thursday 06 February 2014 00:42:51 Bastien Traverse wrote:
> > I just used my Ethernet NIC for the first time on an up-to-date
> > Archlinux; it was working fine until I suspended to RAM: on resume the
> > Realtek/Ethernet device had completely disappeared.
> > 
> > The two entries absent from lspci output after resume are:
> > $ sudo lspci -v
> [..]
> > 03:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd.
> > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
> >         Subsystem: CLEVO/KAPOK Computer Device 0540
> >         Flags: bus master, fast devsel, latency 0, IRQ 45
> >         I/O ports at e000 [size=256]
> >         Memory at f0a04000 (64-bit, prefetchable) [size=4K]
> >         Memory at f0a00000 (64-bit, prefetchable) [size=16K]
> >         Capabilities: [40] Power Management version 3
> >         Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
> >         Capabilities: [70] Express Endpoint, MSI 01
> >         Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
> >         Capabilities: [d0] Vital Product Data
> >         Capabilities: [100] Advanced Error Reporting
> >         Capabilities: [160] Device Serial Number 02-00-00-00-68-4c-e0-00
> >         Kernel driver in use: r8169
> >         Kernel modules: r8169
> 
> I also have an affected laptop where the network and MMC controller
> vanishes on resume. The laptop is also from Clevo, but a different
> model: Clevo B7130. I had no issues with my custom kernel
> configuration (latest version that I tested was 3.13.1), but at least
> the stock Arch kernels from 3.12.2 up to 3.12.6 and 3.13.1 are
> affected by this issue.
> 
> Reproduce with:
> 
>  1. Boot system.
>  2. lspci -nnvt > lspci-nnvt.txt
>  3. Suspend system (lid close)
>  4. lspci -nnvt > lspci-nnvt2.txt
>  5. Observe missing network controller (see diff below).
> 
> --- boot-3.13.1/lspci-nnvt.txt	2014-02-06 17:11:07.070625446 +0100
> +++ boot-3.13.1/lspci-nnvt2.txt	2014-02-06 17:11:19.843386871 +0100
> @@ -11,10 +11,7 @@
>               +-1a.0  Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c]
>               +-1b.0  Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56]
>               +-1c.0-[02-03]----00.0  NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194]
> -             +-1c.1-[04]--+-00.0  JMicron Technology Corp. SD/MMC Host Controller [197b:2382]
> -             |            +-00.2  JMicron Technology Corp. Standard SD Host Controller [197b:2381]
> -             |            +-00.3  JMicron Technology Corp. MS Host Controller [197b:2383]
> -             |            \-00.5  JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller [197b:0250]
> +             +-1c.1-[04]--
>               +-1c.2-[05]----00.0  Intel Corporation Centrino Advanced-N 6200 [8086:422c]
>               +-1d.0  Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34]
>               +-1e.0-[06]--
> 
> The only difference now is the kernel config. I guess that it comes
> from CONFIG_HOTPLUG_PCI. In my non-broken config, it's unset. The
> Arch kernel sets CONFIG_HOTPLUG_PCI=y (and also
> CONFIG_HOTPLUG_PCI_ACPI=y).
> 
> That guess is based on the additional messages I see with the broken config:
> 
>     [    1.033628] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>     [    1.033642] pciehp: PCI Express Hot Plug Controller Driver version: 0.4                                                                                                                                                       
>     ...
>     [  102.704377] iwlwifi 0000:05:00.0: no hotplug settings from platform
>     [  103.170193] xhci_hcd 0000:02:00.0: no hotplug settings from platform
>     [  103.229008] iwlwifi 0000:05:00.0: no hotplug settings from platform
> 
> Before I start bisecting, do you have any ideas to debug this?
> 
> The stock config of Arch Linux kernel 3.13.1-2-ARCH can be found on:
> https://projects.archlinux.org/svntogit/packages.git/tree/trunk/config.x86_64?h=packages/linux&id=0ea780ba731bd214db3007f57f54a3fad709a078

Well, I suspected that it would result from hotplug changes.

Please send me a dmesg log including the suspend-resume cycle after which the
device is missing.

Thanks!

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.