From: Dave Jiang <dave.jiang@intel.com>
To: Srirangan Madhavan <smadhavan@nvidia.com>,
Alison Schofield <alison.schofield@intel.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Ira Weiny <iweiny@kernel.org>,
Jonathan Cameron <jic23@kernel.org>,
Vishal Verma <vishal.l.verma@intel.com>,
linux-cxl@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Li Ming <ming.li@zohomail.com>,
Joshua Machauer <machaujo@amazon.de>,
Alex Williamson <alex.williamson@redhat.com>,
vsethi@nvidia.com, alwilliamson@nvidia.com,
Sai Yashwanth Reddy Kancherla <skancherla@nvidia.com>,
Vishal Aslot <vaslot@nvidia.com>,
Manish Honap <mhonap@nvidia.com>, Jiandi An <jan@nvidia.com>,
Richard Cheng <icheng@nvidia.com>,
linux-tegra@vger.kernel.org
Subject: Re: [PATCH v17 00/19] PCI/CXL: Add CXL reset support for Type 2 devices
Date: Mon, 16 Nov 2026 12:11:00 -0700 [thread overview]
Message-ID: <5616c825-454e-4eba-9352-b06d98dc123a@intel.com> (raw)
In-Reply-To: <20261105185917.2667656-1-smadhavan@nvidia.com>
On 11/5/26 11:58 AM, Srirangan Madhavan wrote:
> Hi folks,
>
> This series adds CXL Reset for Type 2 devices through the existing PCI
> reset_method and reset sysfs attributes. It disables CXL.cache, performs
> supported cache writeback, initiates CXL Reset with Memory Clear, and
> restores cached HDM decoder and CXL Device DVSEC state before PCI use
> resumes. Active HDM ranges are reserved and CPU caches invalidated before
> and after reset. The method remains limited to eligible single-function
> devices with both CXL.cache and CXL.mem enabled. CXL bus reset restores
> the same cached state and flushes the host and device caches around the
> reset.
>
> The reset sequence follows the CXL 4.0 specification [4], including
> CXL.cache disable, optional cache writeback, CXL Reset Memory Clear,
> ResetComplete polling, and ResetError reporting. Sections 9.7.2 and 9.7.3
> define the completion timeout encodings and reset access restrictions.
>
> The userspace ABI is the existing PCI reset interface:
>
> /sys/bus/pci/devices/.../reset_method
> /sys/bus/pci/devices/.../reset
>
> Userspace selects "cxl_reset" in reset_method and triggers the reset
> through reset. Following Dan's v6 feedback, this uses the PCI interface
> instead of adding a memdev-specific sysfs ABI.
>
> For sysfs reset, the generic PCI path invokes the driver's reset_prepare()
> callback when provided and disables PCI I/O, memory decoding, and bus
> mastering. The CXL path reserves affected HDM ranges exclusively and
> blocks IOMMU translations where applicable. It does not offline memory
> or revoke mappings: userspace is expected to offline CXL.mem users before
> reset. The reservation enforces this for claimed ranges by failing the
> reset while a conflicting resource is claimed [9].
>
> The global region lock is held from snapshot through restoration. Memory
> Clear completion is awaited for the timeout the device advertises, up to
> 100 seconds, so the lock can be held for that long plus cache flushes.
I think holding it across the bus reset can deadlock with pciehp and a
PCI remove. I tested in QEMU with two cxl-type2 devices from Manish's
RFC [1].
For a device in a pciehp slot, pci_reset_bus_function() ends up in
pciehp_reset_slot(), which takes the slot's reset_lock. The reset still
holds cxl_rwsem.region at that point.
Two other tasks can complete a cycle. pciehp_ist() for that slot can
hold reset_lock and wait for pci_rescan_remove_lock in
pciehp_unconfigure_device(). A PCI remove of a second Type 2 device can
hold pci_rescan_remove_lock while cxl_decoder_detach() waits for
cxl_rwsem.region.
On v17 as posted, lockdep reports the cycle:
[ 60.891789] WARNING: possible circular locking dependency detected
[ 60.893014] irq/24-pciehp/103 is trying to acquire lock:
[ 60.893367] ffff888072b4f128 (&cxl_memdev_key){+.+.}-{4:4}, at: device_del+0x8d/0x580
but task is already holding lock:
[ 60.894498] ffffffff84699e80 (pci_rescan_remove_lock){+.+.}-{4:4}, at: pciehp_unconfigure_device+0x93/0x210
[...]
-> #3 (&ctrl->reset_lock){++++}-{4:4}:
[ 60.916794] down_write_nested+0x80/0x170
[ 60.917826] pciehp_reset_slot+0x6c/0xc0
[ 60.918893] pci_reset_hotplug_slot+0x5c/0x90
[ 60.919928] pci_reset_bus_function+0x161/0x330
[ 60.920951] cxl_reset_bus_function+0x1c6/0x280
[ 60.921958] __pci_reset_function_locked+0x96/0x170
[ 60.922990] pci_reset_function+0xc8/0x180
[ 60.923977] reset_store+0x84/0xd0
[...]
-> #2 (cxl_rwsem.region){++++}-{4:4}:
[...]
[ 61.013490] Chain exists of:
&cxl_memdev_key --> &ctrl->reset_lock --> pci_rescan_remove_lock
With a test-only msleep() after cxl_region_quiesce_lock() in
pci_cxl_reset_prepare(), it turns into a real hang. The reset, a sysfs
remove of the second device and a power off of the first device's slot
all got stuck.
Two region reads blocked behind the reset as well. A read of
region1/commit timed out after 5 s, and cxl list -R stayed in D state in
decoders_committed_show().
To reproduce, I used Manish's RFC as posted. It allows one cxl-type2 per
pxb-cxl, so each device has its own host bridge and window. On q35 with
cxl=on, plus the memory backends:
-device pxb-cxl,id=cxl.0,bus=pcie.0,bus_nr=53
-device cxl-rp,id=hb0rp0,bus=cxl.0,chassis=0,slot=0,port=0
-device cxl-type2,bus=hb0rp0,volatile-memdev=t2mem0,id=cxl-t2,fmw-index=0
-device pxb-cxl,id=cxl.1,bus=pcie.0,bus_nr=191
-device cxl-rp,id=hb1rp0,bus=cxl.1,chassis=0,slot=2,port=0
-device cxl-type2,bus=hb1rp0,volatile-memdev=t2mem1,id=cxl-t2b,fmw-index=1
-M cxl-fmw.0.targets.0=cxl.0,cxl-fmw.0.size=4G,cxl-fmw.1.targets.0=cxl.1,cxl-fmw.1.size=4G
The guest kernel needs CONFIG_CXL_REGION_INVALIDATION_TEST=y. Without it,
the cxl_bus reset fails in an x86 guest with "failed to prepare CXL bus
reset ranges: -6".
I drove both devices with a small test module based on
tools/testing/cxl/test/accel.c. It attaches each firmware-committed
region with devm_cxl_probe_mem() and has no reset handlers. Then, with
lockdep on:
echo cxl_bus > /sys/bus/pci/devices/0000:36:00.0/reset_method
echo 1 > /sys/bus/pci/devices/0000:36:00.0/reset
echo 0 > /sys/bus/pci/slots/2/power # second device, 0000:c0:00.0
For the hang, add msleep(10000) after cxl_region_quiesce_lock() in
pci_cxl_reset_prepare(). Start the cxl_bus reset, remove 0000:c0:00.0
through sysfs two seconds later, and power off slot 0 two seconds after
that.
Separately, pci_cxl_reset_prepare() returns with the quiesce held on its
success path only, and cxl_restore_state_after_pci_reset() releases it.
With Clang 23 and CONTEXT_ANALYSIS=y passed to make, that gives five
cxl_region_quiesce warnings in drivers/pci/cxl.c.
[1]: https://lore.kernel.org/all/20261106035911.1280066-1-mhonap@nvidia.com/
DJ
prev parent reply other threads:[~2026-11-16 19:11 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 18:58 Srirangan Madhavan
2026-11-05 18:58 ` [PATCH v17 01/19] cxl: Clarify decoder interleave limit Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 02/19] cxl: Share CXL port upstream PCI device lookup Srirangan Madhavan
2026-11-10 13:36 ` Li Ming
2026-11-13 15:50 ` Dave Jiang
2026-11-15 3:25 ` Li Ming
2026-11-05 18:59 ` [PATCH v17 03/19] cxl: Move decoder declarations to shared header Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 04/19] cxl: Embed decoder configuration in a standalone structure Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 05/19] cxl: Introduce endpoint HDM decoder settings Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 06/19] cxl: Move HDM decoder helpers to built-in code Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 07/19] cxl: Share HDM decoder register unpacking Srirangan Madhavan
2026-11-12 21:35 ` Dave Jiang
2026-11-05 18:59 ` [PATCH v17 08/19] cxl: Move cxl_rwsem into built-in code Srirangan Madhavan
2026-11-12 23:49 ` Dave Jiang
2026-11-05 18:59 ` [PATCH v17 09/19] cxl: Refresh cached PCI HDM decoder settings Srirangan Madhavan
2026-11-13 0:38 ` Dave Jiang
2026-11-05 18:59 ` [PATCH v17 10/19] cxl: Build register block helpers into the kernel Srirangan Madhavan
2026-11-13 18:02 ` Dave Jiang
2026-11-05 18:59 ` [PATCH v17 11/19] PCI/CXL: Cache endpoint HDM state during PCI enumeration Srirangan Madhavan
2026-11-10 14:12 ` Li Ming
2026-11-11 3:54 ` Li Ming
2026-11-05 18:59 ` [PATCH v17 12/19] PCI/CXL: Add CXL Device Reset sequencing Srirangan Madhavan
2026-11-10 14:29 ` Li Ming
2026-11-11 10:12 ` Lucero Palau, Alejandro
2026-11-05 18:59 ` [PATCH v17 13/19] cxl: Validate and synchronize HDM ranges around reset Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 14/19] PCI/CXL: Reject reset with unsafe function scope Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 15/19] PCI/CXL: Restore CXL state after PCI reset Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 16/19] PCI/CXL: Expose CXL Reset as a PCI reset method Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 17/19] PCI/CXL: Restore CXL state after CXL bus reset Srirangan Madhavan
2026-11-13 17:37 ` Dave Jiang
2026-11-05 18:59 ` [PATCH v17 18/19] PCI/CXL: Flush host and device caches for " Srirangan Madhavan
2026-11-05 18:59 ` [PATCH v17 19/19] cxl: Add KUnit checks for HDM decoder unpacking Srirangan Madhavan
2026-11-05 19:31 ` [PATCH v17 00/19] PCI/CXL: Add CXL reset support for Type 2 devices Alison Schofield
2026-11-16 19:11 ` Dave Jiang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5616c825-454e-4eba-9352-b06d98dc123a@intel.com \
--to=dave.jiang@intel.com \
--cc=alex.williamson@redhat.com \
--cc=alison.schofield@intel.com \
--cc=alwilliamson@nvidia.com \
--cc=bhelgaas@google.com \
--cc=dave@stgolabs.net \
--cc=icheng@nvidia.com \
--cc=iweiny@kernel.org \
--cc=jan@nvidia.com \
--cc=jic23@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=machaujo@amazon.de \
--cc=mhonap@nvidia.com \
--cc=ming.li@zohomail.com \
--cc=skancherla@nvidia.com \
--cc=smadhavan@nvidia.com \
--cc=vaslot@nvidia.com \
--cc=vishal.l.verma@intel.com \
--cc=vsethi@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®