From: Kirill Marinushkin <kmarinushkin@birdec.tech>
To: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org, Liam Girdwood <lgirdwood@gmail.com>,
Takashi Iwai <tiwai@suse.com>,
linux-kernel@vger.kernel.org
Subject: Re: Applied "ASoC: pcm3060: Add DT property for single-ended output" to the asoc tree
Date: Wed, 14 Nov 2018 08:15:11 +0100 [thread overview]
Message-ID: <56469208-7e28-6804-0a70-998b588a3c6a@birdec.tech> (raw)
In-Reply-To: <20181114003707.4047B440078@finisterre.ee.mobilebroadband>
Hello Mark,
Thank you for applying this patch series.
I think you forgot one patch in the series: patch [1] is a documentation for
patch [2]. It has a different naming scheme, because that's how the document [3]
recommends. That's why it was not obvious that they relate to each other.
Document [3] also says:
> The Documentation/ portion of the patch should come in the series before
> the code implementing the binding.
Therefore, could you to apply patch [1] to the same branch as [2]?
Best Regards,
Kirill
[1] [PATCH v2 1/3] dt-bindings: sound: Add documentation for pcm3060 property
out-single-ended
[2] [PATCH v2 2/3] ASoC: pcm3060: Add DT property for single-ended output
[3] Documentation/devicetree/bindings/submitting-patches.txt
On 11/14/18 01:37, Mark Brown wrote:
> The patch
>
> ASoC: pcm3060: Add DT property for single-ended output
>
> has been applied to the asoc tree at
>
> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
>
> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
>
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
>
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
>
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
>
> Thanks,
> Mark
>
> From b1c0000bde8fb287f4fd3493ca4167efee344c3e Mon Sep 17 00:00:00 2001
> From: Kirill Marinushkin <kmarinushkin@birdec.tech>
> Date: Mon, 12 Nov 2018 08:08:33 +0100
> Subject: [PATCH] ASoC: pcm3060: Add DT property for single-ended output
>
> DAC output may be differential (default) or single-ended.
>
> Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
> Signed-off-by: Mark Brown <broonie@kernel.org>
> ---
> sound/soc/codecs/pcm3060.c | 14 ++++++++++++++
> sound/soc/codecs/pcm3060.h | 1 +
> 2 files changed, 15 insertions(+)
>
> diff --git a/sound/soc/codecs/pcm3060.c b/sound/soc/codecs/pcm3060.c
> index 771b46e1974b..1dd851a7b43b 100644
> --- a/sound/soc/codecs/pcm3060.c
> +++ b/sound/soc/codecs/pcm3060.c
> @@ -270,9 +270,23 @@ EXPORT_SYMBOL(pcm3060_regmap);
>
> /* device */
>
> +static void pcm3060_parse_dt(const struct device_node *np,
> + struct pcm3060_priv *priv)
> +{
> + priv->out_se = of_property_read_bool(np, "ti,out-single-ended");
> +}
> +
> int pcm3060_probe(struct device *dev)
> {
> int rc;
> + struct pcm3060_priv *priv = dev_get_drvdata(dev);
> +
> + if (dev->of_node)
> + pcm3060_parse_dt(dev->of_node, priv);
> +
> + if (priv->out_se)
> + regmap_update_bits(priv->regmap, PCM3060_REG64,
> + PCM3060_REG_SE, PCM3060_REG_SE);
>
> rc = devm_snd_soc_register_component(dev, &pcm3060_soc_comp_driver,
> pcm3060_dai,
> diff --git a/sound/soc/codecs/pcm3060.h b/sound/soc/codecs/pcm3060.h
> index fd89a68aa8a7..c895cf40ee10 100644
> --- a/sound/soc/codecs/pcm3060.h
> +++ b/sound/soc/codecs/pcm3060.h
> @@ -25,6 +25,7 @@ struct pcm3060_priv_dai {
> struct pcm3060_priv {
> struct regmap *regmap;
> struct pcm3060_priv_dai dai[PCM3060_DAI_IDS_NUM];
> + u8 out_se: 1;
> };
>
> int pcm3060_probe(struct device *dev);
>
next prev parent reply other threads:[~2018-11-14 7:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-29 8:59 [PATCH 1/2] ASoC: pcm3060: Add control for differential output Kirill Marinushkin
2018-10-29 8:59 ` [PATCH 2/2] ASoC: pcm3060: Rename output widgets Kirill Marinushkin
2018-11-05 11:20 ` [PATCH 1/2] ASoC: pcm3060: Add control for differential output Mark Brown
2018-11-09 13:06 ` Kirill Marinushkin
2018-11-12 7:08 ` [PATCH v2 1/3] dt-bindings: sound: Add documentation for pcm3060 property out-single-ended Kirill Marinushkin
2018-11-12 7:08 ` [PATCH v2 2/3] ASoC: pcm3060: Add DT property for single-ended output Kirill Marinushkin
2018-11-14 0:37 ` Applied "ASoC: pcm3060: Add DT property for single-ended output" to the asoc tree Mark Brown
2018-11-14 7:15 ` Kirill Marinushkin [this message]
2018-11-12 7:08 ` [PATCH v2 3/3] ASoC: pcm3060: Rename output widgets Kirill Marinushkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56469208-7e28-6804-0a70-998b588a3c6a@birdec.tech \
--to=kmarinushkin@birdec.tech \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®