Re: [PATCH v1 3/3] ARM64 LPC: update binding doc

[Rongrong Zou <zourongrong@huawei.com>]

在 2016/1/5 0:34, Arnd Bergmann 写道:
> On Tuesday 05 January 2016 00:04:19 Rongrong Zou wrote:
>> 在 2016/1/4 19:13, Arnd Bergmann 写道:
>>> On Sunday 03 January 2016 20:24:14 Rongrong Zou wrote:
>>>> 在 2015/12/31 23:00, Rongrong Zou 写道:
>>>> */
>>>>       compatible = "low-pin-count";
>>>>       device_type = "isa";
>>>>       #address-cells = <2>;
>>>>       #size-cells = <1>;
>>>>       reg = <0x0 0xa01b0000 0x0 0x10000>;
>>>>       ranges = <0x1 0x0 0x0 0x0 0x1000>;
>>>> /*
>>>> *  ranges is required, then i can get the IORESOURCE_IO <0xe4,4> from "reg = <0x1, 0x000000e4, 4>".
>>>> *
>>>> */
>>>>       ipmi_0:ipmi@000000e4{
>>>>               device_type = "ipmi";
>>>>               compatible = "ipmi-bt";
>>>>               reg = <0x1 0x000000e4 0x4>;
>>>> };
>>>>
>>>
>>> This looks wrong: the property above says that the I/O port range is
>>> translated to MMIO address 0x00000000 to 0x00010000, which is not
>>> true on your hardware. I think this needs to be changed in the code
>>> so the ranges property is not required for I/O ports.
>>
>> Ranges property can set empty, but this means 1:1 translation. the I/O
>> port range is translated to MMIO address 0x00000001 00000000 to
>> 0x00000001 00000004, it looks wrong else. I wonder if anyone get legacy
>> I/O port resource from dts.
>
> As I said, nothing should really require the ranges property here, unless
> you have a valid IORESOURCE_MEM translation. The code that requires
> the ranges to be present is wrong.
>

I think the openfirmware(DT) do not support for those unmapped I/O ports, because I
must get resource by calling of_address_to_resource(), which have to call
pci_address_to_pio() when resource type is IORESOURCE_IO. I'm sorry I have no
better idea for this now. Maybe liviu can give me some opinions.

/**
  * of_address_to_resource - Translate device tree address and return as resource
  *
  * Note that if your address is a PIO address, the conversion will fail if
  * the physical address can't be internally converted to an IO token with
  * pci_address_to_pio(), that is because it's either called to early or it
  * can't be matched to any host bridge IO space
  */
int of_address_to_resource(struct device_node *dev, int index,
			   struct resource *r)

>> For ipmi driver, I can get I/O port resource by DMI rather than dts.
>
> No, the ipmi driver uses the resource that belongs to the platform
> device already, you can't rely on DMI data to be present there.

Ipmi has a lot of way to be discovered(ACPI, DMI, hardcoded, hot-add,
openfirmware and a few other), I think we just use one of them, not all of them.
It depend on vendor's hardware solution actually.


>
> 	Arnd
>
> .
>

Thanks,

Rongrong