mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Len Brown <lenb@kernel.org>
To: x86@kernel.org, sfi-devel@simplefirmware.org,
	linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Feng Tang <feng.tang@intel.com>, Len Brown <len.brown@intel.com>
Subject: [PATCH 04/12] SFI: create include/linux/sfi.h
Date: Wed, 08 Jul 2009 00:13:50 -0400	[thread overview]
Message-ID: <56f1291c60859b65ac62521e7fe4b82e73205ef6.1247025117.git.len.brown@intel.com> (raw)
In-Reply-To: <1247026438-20891-1-git-send-email-lenb@kernel.org>
In-Reply-To: <8e4a93858bce74ed3080dd607aa471023f1a2737.1247025117.git.len.brown@intel.com>

From: Feng Tang <feng.tang@intel.com>

include/linux/include/sfi.h defines everything that customers
of SFI need to know in order to use the SFI suport in the kernel.

The primary API is sfi_table_parse(), where a driver or another part
of the kernel can supply a handler to parse the named table.

sfi.h also includes the currently defined table signatures and table formats.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 include/linux/sfi.h |  198 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 198 insertions(+), 0 deletions(-)
 create mode 100644 include/linux/sfi.h

diff --git a/include/linux/sfi.h b/include/linux/sfi.h
new file mode 100644
index 0000000..f00f4da
--- /dev/null
+++ b/include/linux/sfi.h
@@ -0,0 +1,198 @@
+/* sfi.h Simple Firmware Interface */
+
+/*
+ * Copyright (C) 2009, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef _LINUX_SFI_H
+#define _LINUX_SFI_H
+
+/* Table signatures reserved by the SFI specification */
+#define SFI_SIG_SYST		"SYST"
+#define SFI_SIG_FREQ		"FREQ"
+#define SFI_SIG_IDLE		"IDLE"
+#define SFI_SIG_CPUS		"CPUS"
+#define SFI_SIG_MTMR		"MTMR"
+#define SFI_SIG_MRTC		"MRTC"
+#define SFI_SIG_MMAP		"MMAP"
+#define SFI_SIG_APIC		"APIC"
+#define SFI_SIG_XSDT		"XSDT"
+#define SFI_SIG_WAKE		"WAKE"
+#define SFI_SIG_SPIB		"SPIB"
+#define SFI_SIG_I2CB		"I2CB"
+#define SFI_SIG_GPEM		"GPEM"
+
+#define SFI_ACPI_TABLE		(1 << 0)
+#define SFI_NORMAL_TABLE	(1 << 1)
+
+#define SFI_SIGNATURE_SIZE	4
+#define SFI_OEM_ID_SIZE		6
+#define SFI_OEM_TABLE_ID_SIZE	8
+
+#define SFI_SYST_SEARCH_BEGIN		0x000E0000
+#define SFI_SYST_SEARCH_END		0x000FFFFF
+
+#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \
+	((ptable->header.length - sizeof(struct sfi_table_header)) / \
+	(sizeof(entry_type)))
+/*
+ * Table structures must be byte-packed to match the SFI specification,
+ * as they are provided by the BIOS.
+ */
+struct sfi_table_header {
+	char	signature[SFI_SIGNATURE_SIZE];
+	u32	length;
+	u8	revision;
+	u8	checksum;
+	char	oem_id[SFI_OEM_ID_SIZE];
+	char	oem_table_id[SFI_OEM_TABLE_ID_SIZE];
+} __packed;
+
+struct sfi_table_simple {
+	struct sfi_table_header		header;
+	u64				pentry[1];
+} __packed;
+
+/* comply with UEFI spec 2.1 */
+struct sfi_mem_entry {
+	u32	type;
+	u64	phy_start;
+	u64	vir_start;
+	u64	pages;
+	u64	attrib;
+} __packed;
+
+struct sfi_cpu_table_entry {
+	u32	apicid;
+} __packed;
+
+struct sfi_cstate_table_entry {
+	u32	hint;		/* MWAIT hint */
+	u32	latency;	/* latency in ms */
+} __packed;
+
+struct sfi_apic_table_entry {
+	u64	phy_addr;	/* phy base addr for APIC reg */
+} __packed;
+
+struct sfi_freq_table_entry {
+	u32	freq;
+	u32	latency;	/* transition latency in ms */
+	u32	ctrl_val;	/* value to write to PERF_CTL */
+} __packed;
+
+struct sfi_wake_table_entry {
+	u64 phy_addr;	/* pointer to where the wake vector locates */
+} __packed;
+
+struct sfi_timer_table_entry {
+	u64	phy_addr;	/* phy base addr for the timer */
+	u32	freq;		/* in HZ */
+	u32	irq;
+} __packed;
+
+struct sfi_rtc_table_entry {
+	u64	phy_addr;	/* phy base addr for the RTC */
+	u32	irq;
+} __packed;
+
+struct sfi_spi_table_entry {
+	u16	host_num;	/* attached to host 0, 1...*/
+	u16	cs;		/* chip select */
+	u16	irq_info;
+	char	name[16];
+	u8	dev_info[10];
+} __packed;
+
+struct sfi_i2c_table_entry {
+	u16	host_num;
+	u16	addr;		/* slave addr */
+	u16	irq_info;
+	char	name[16];
+	u8	dev_info[10];
+} __packed;
+
+struct sfi_gpe_table_entry {
+	u16	logical_id;	/* logical id */
+	u16	phy_id;		/* physical GPE id */
+} __packed;
+
+
+typedef int (*sfi_table_handler) (struct sfi_table_header *table);
+
+#ifdef	CONFIG_SFI
+extern int __init sfi_init_memory_map(void);
+extern void __init sfi_init(void);
+extern int __init sfi_platform_init(void);
+extern void __init sfi_init_late(void);
+
+int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
+			uint flag, sfi_table_handler handler);
+
+extern int sfi_disabled;
+static inline void disable_sfi(void)
+{
+	sfi_disabled = 1;
+}
+
+#else /* !CONFIG_SFI */
+
+static inline int sfi_init_memory_map(void)
+{
+	return -1;
+}
+
+static inline void sfi_init(void)
+{
+	return;
+}
+
+static inline void sfi_init_late(void)
+{
+}
+
+#define sfi_disabled	0
+
+static inline int sfi_table_parse(char *signature, char *oem_id,
+					char *oem_table_id, unsigned int flags,
+					sfi_table_handler handler)
+{
+	return -1;
+}
+
+#endif /* CONFIG_SFI */
+
+#endif	/*_LINUX_SFI_H*/
-- 
1.6.0.6


  parent reply	other threads:[~2009-07-08  4:16 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-08  4:13 [PATCH v2 for 2.6.32] SFI - Simple Firmware Interface support Len Brown
2009-07-08  4:13 ` [PATCH 01/12] SFI: Simple Firmware Interface - new MAINTAINERS entry Len Brown
2009-07-08  4:13   ` [PATCH 02/12] SFI, x86: add CONFIG_SFI Len Brown
2009-07-10  5:23     ` Ingo Molnar
2009-07-08  4:13   ` [PATCH 03/12] SFI: document boot param "sfi=off" Len Brown
2009-07-28 19:24     ` Bjorn Helgaas
2009-07-28 19:52       ` Len Brown
2009-07-08  4:13   ` Len Brown [this message]
2009-07-10  6:48     ` [PATCH 04/12] SFI: create include/linux/sfi.h Ingo Molnar
2009-07-08  4:13   ` [PATCH 05/12] SFI: add core support Len Brown
2009-07-10  7:40     ` Ingo Molnar
2009-07-08  4:13   ` [PATCH 06/12] ACPI, x86: remove ACPI dependency on some IO-APIC routines Len Brown
2009-07-10  6:51     ` Ingo Molnar
2009-07-08  4:13   ` [PATCH 07/12] SFI: add x86 support Len Brown
2009-07-10  6:37     ` Ingo Molnar
2009-07-10  6:48       ` Feng Tang
2009-07-08  4:13   ` [PATCH 08/12] SFI, x86: hook e820() for memory map initialization Len Brown
2009-07-08 21:37     ` H. Peter Anvin
2009-07-09  1:11       ` Feng Tang
2009-07-09  3:57         ` H. Peter Anvin
2009-07-08  4:13   ` [PATCH 09/12] SFI: Enable SFI to parse ACPI tables Len Brown
2009-07-10  6:10     ` Ingo Molnar
2009-07-08  4:13   ` [PATCH 10/12] ACPI: check acpi_disabled in acpi_table_parse() Len Brown
2009-07-08  4:13   ` [PATCH 11/12] SFI, PCI: Hook MMCONFIG Len Brown
2009-07-10  5:52     ` Ingo Molnar
2009-07-10  7:17       ` Feng Tang
2009-07-10 11:14         ` Ingo Molnar
2009-07-08  4:13   ` [PATCH 12/12] SFI: add boot-time initialization hooks Len Brown
2009-07-10  5:18 ` [PATCH v2 for 2.6.32] SFI - Simple Firmware Interface support Ingo Molnar
2009-07-11  1:01   ` Len Brown
2009-07-11  8:26     ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56f1291c60859b65ac62521e7fe4b82e73205ef6.1247025117.git.len.brown@intel.com \
    --to=lenb@kernel.org \
    --cc=feng.tang@intel.com \
    --cc=len.brown@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sfi-devel@simplefirmware.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®