From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Lennert Buytenhek <kernel@wantstofly.org>,
Richard Purdie <rpurdie@rpsys.net>
Subject: [PATCH] arch/arm/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:01 -0800 [thread overview]
Message-ID: <1197919875-5288-2-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/arm/mach-pxa/corgi_ssp.c | 2 +-
arch/arm/mach-sa1100/collie_pm.c | 2 +-
arch/arm/plat-s3c24xx/irq.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 40dea3d..a6f2105 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -31,7 +31,7 @@ static struct corgissp_machinfo *ssp_machinfo;
/*
* There are three devices connected to the SSP interface:
* 1. A touchscreen controller (TI ADS7846 compatible)
- * 2. An LCD contoller (with some Backlight functionality)
+ * 2. An LCD controller (with some Backlight functionality)
* 3. A battery monitoring IC (Maxim MAX1111)
*
* Each device uses a different speed/mode of communication.
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 1e25b1d..94620be 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -165,7 +165,7 @@ int collie_read_temp(void)
ucb1x00_adc_enable(ucb);
ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_TMP_ON, 0);
- /* >1010 = battery removed, 460 = 22C ?, higer = lower temp ? */
+ /* >1010 = battery removed, 460 = 22C ?, higher = lower temp ? */
voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD0, UCB_SYNC);
ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_TMP_ON);
ucb1x00_adc_disable(ucb);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 8fbc884..194821e 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -47,7 +47,7 @@
* Mark IRQ_LCD valid
*
* 25-Jul-2005 Ben Dooks
- * Split the S3C2440 IRQ code to seperate file
+ * Split the S3C2440 IRQ code to separate file
*/
#include <linux/init.h>
--
1.5.3.7.949.g2221a6
WARNING: multiple messages have this Message-ID
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Dirk Opfer <dirk@opfer-online.de>,
Lennert Buytenhek <kernel@wantstofly.org>,
Richard Purdie <rpurdie@rpsys.net>
Subject: [PATCH] include/asm-arm/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:02 -0800 [thread overview]
Message-ID: <1197919875-5288-3-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
include/asm-arm/arch-ixp4xx/ixp4xx-regs.h | 34 +++++++++++++-------------
include/asm-arm/arch-pxa/pxa-regs.h | 36 ++++++++++++++--------------
include/asm-arm/hardware/it8152.h | 2 +-
include/asm-arm/mach/udc_pxa2xx.h | 2 +-
4 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
index 5d949d7..1205c28 100644
--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
@@ -587,23 +587,23 @@
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
-#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */
-#define USIR0_IR1 (1 << 1) /* Interrup request ep 1 */
-#define USIR0_IR2 (1 << 2) /* Interrup request ep 2 */
-#define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */
-#define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */
-#define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */
-#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */
-#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */
-
-#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */
-#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */
-#define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */
-#define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */
-#define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */
-#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
-#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
-#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
+#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
+#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
+#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
+#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
+#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
+#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
+#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
+#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
+
+#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
+#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
+#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
+#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
+#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
+#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
+#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
+#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 6b33df6..7a110a0 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -737,25 +737,25 @@
#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
-#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */
-#define USIR0_IR1 (1 << 1) /* Interrup request ep 1 */
-#define USIR0_IR2 (1 << 2) /* Interrup request ep 2 */
-#define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */
-#define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */
-#define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */
-#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */
-#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */
+#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
+#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
+#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
+#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
+#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
+#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
+#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
+#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
-#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */
-#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */
-#define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */
-#define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */
-#define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */
-#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
-#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
-#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
+#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
+#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
+#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
+#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
+#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
+#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
+#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
+#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
#elif defined(CONFIG_PXA27x)
@@ -1020,7 +1020,7 @@
#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
-#define ICCR0_AME (1 << 7) /* Adress match enable */
+#define ICCR0_AME (1 << 7) /* Address match enable */
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
#define ICCR0_RXE (1 << 4) /* Receive enable */
@@ -1668,7 +1668,7 @@
#define SSCR1_TSRE (1 << 21) /* Transmit Service Request Enable */
#define SSCR1_RSRE (1 << 20) /* Receive Service Request Enable */
#define SSCR1_TINTE (1 << 19) /* Receiver Time-out Interrupt enable */
-#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_PINTE (1 << 18) /* Peripheral Trailing Byte Interrupt Enable */
#define SSCR1_STRF (1 << 15) /* Select FIFO or EFWR */
#define SSCR1_EFWR (1 << 14) /* Enable FIFO Write/Read */
diff --git a/include/asm-arm/hardware/it8152.h b/include/asm-arm/hardware/it8152.h
index aaebb61..74b5fff 100644
--- a/include/asm-arm/hardware/it8152.h
+++ b/include/asm-arm/hardware/it8152.h
@@ -42,7 +42,7 @@ extern unsigned long it8152_base_address;
#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500)
/*
- Interrup contoler per register summary:
+ Interrupt controller per register summary:
---------------------------------------
LCDNIRR:
IT8152_LD_IRQ(8) PCICLK stop
diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h
index ff0a957..dd4b369 100644
--- a/include/asm-arm/mach/udc_pxa2xx.h
+++ b/include/asm-arm/mach/udc_pxa2xx.h
@@ -16,7 +16,7 @@ struct pxa2xx_udc_mach_info {
#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */
/* Boards following the design guidelines in the developer's manual,
- * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
+ * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
* VBUS IRQ and omit the methods above. Store the GPIO number
* here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
*/
--
1.5.3.7.949.g2221a6
WARNING: multiple messages have this Message-ID
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Blackfin Architecture Team
<uclinux-dist-devel@blackfin.uclinux.org>
Subject: [PATCH] arch/blackfin/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:03 -0800 [thread overview]
Message-ID: <1197919875-5288-4-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/blackfin/kernel/early_printk.c | 2 +-
arch/blackfin/mach-bf548/ints-priority.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c
index 724f4a5..fb11ce6 100644
--- a/arch/blackfin/kernel/early_printk.c
+++ b/arch/blackfin/kernel/early_printk.c
@@ -187,7 +187,7 @@ asmlinkage void __init init_early_exception_vectors(void)
bfin_write_EVT15(early_trap);
CSYNC();
- /* Set all the return from interupt, exception, NMI to a known place
+ /* Set all the return from interrupt, exception, NMI to a known place
* so if we do a RETI, RETX or RETN by mistake - we go somewhere known
* Note - don't change RETS - we are in a subroutine, or
* RETE - since it might screw up if emulator is attached
diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c
index cb0ebac..546517c 100644
--- a/arch/blackfin/mach-bf548/ints-priority.c
+++ b/arch/blackfin/mach-bf548/ints-priority.c
@@ -4,7 +4,7 @@
* Author: Michael Hennerich
*
* Created:
- * Description: Set up the interupt priorities
+ * Description: Set up the interrupt priorities
*
* Modified:
* Copyright 2004-2006 Analog Devices Inc.
--
1.5.3.7.949.g2221a6
WARNING: multiple messages have this Message-ID
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Subject: [PATCH] arch/h8300/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:04 -0800 [thread overview]
Message-ID: <1197919875-5288-5-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/h8300/platform/h8s/ints.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/h8300/platform/h8s/ints.c b/arch/h8300/platform/h8s/ints.c
index 551fd5f..ac10b97 100644
--- a/arch/h8300/platform/h8s/ints.c
+++ b/arch/h8300/platform/h8s/ints.c
@@ -121,7 +121,7 @@ void __init init_IRQ(void)
printk("virtual vector at 0x%08lx\n",(unsigned long)ramvec);
#if defined(CONFIG_GDB_DEBUG)
- /* save orignal break vector */
+ /* save original break vector */
break_vec = ramvec[TRAP3_VEC];
#else
break_vec = VECTOR(trace_break);
--
1.5.3.7.949.g2221a6
WARNING: multiple messages have this Message-ID
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Jes Sorensen <jes@sgi.com>, Tony Luck <tony.luck@intel.com>,
linux-altix@sgi.com, linux-ia64@vger.kernel.org
Subject: [PATCH] arch/ia64/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:05 -0800 [thread overview]
Message-ID: <1197919875-5288-6-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/ia64/sn/pci/tioce_provider.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index cee9379..e1a3e19 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -41,7 +41,7 @@
* } else
* do desired mmr access
*
- * According to hw, we can use reads instead of writes to the above addres
+ * According to hw, we can use reads instead of writes to the above address
*
* Note this WAR can only to be used for accessing internal MMR's in the
* TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the
--
1.5.3.7.949.g2221a6
WARNING: multiple messages have this Message-ID
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Tony Luck <tony.luck@intel.com>,
linux-ia64@vger.kernel.org
Subject: [PATCH] include/asm-ia64/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:06 -0800 [thread overview]
Message-ID: <1197919875-5288-7-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
include/asm-ia64/hw_irq.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/asm-ia64/hw_irq.h b/include/asm-ia64/hw_irq.h
index bba5baa..7e6e377 100644
--- a/include/asm-ia64/hw_irq.h
+++ b/include/asm-ia64/hw_irq.h
@@ -63,7 +63,7 @@ extern int ia64_last_device_vector;
#define IA64_NUM_DEVICE_VECTORS (IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
#define IA64_MCA_RENDEZ_VECTOR 0xe8 /* MCA rendez interrupt */
-#define IA64_PERFMON_VECTOR 0xee /* performanc monitor interrupt vector */
+#define IA64_PERFMON_VECTOR 0xee /* performance monitor interrupt vector */
#define IA64_TIMER_VECTOR 0xef /* use highest-prio group 15 interrupt for timer */
#define IA64_MCA_WAKEUP_VECTOR 0xf0 /* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
#define IA64_IPI_LOCAL_TLB_FLUSH 0xfc /* SMP flush local TLB */
--
1.5.3.7.949.g2221a6
WARNING: multiple messages have this Message-ID
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Hirokazu Takata <takata@linux-m32r.org>,
linux-m32r-ja@ml.linux-m32r.org (in Japanese),
linux-m32r@ml.linux-m32r.org
Subject: [PATCH] arch/m32r/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:07 -0800 [thread overview]
Message-ID: <1197919875-5288-8-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/m32r/kernel/ptrace.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index ed4d075..9aa615d 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -476,7 +476,7 @@ unregister_debug_trap(struct task_struct *child, unsigned long addr,
return 0;
}
- /* Recover orignal instruction code. */
+ /* Recover original instruction code. */
*code = p->insn[i];
/* Shift debug trap entries. */
--
1.5.3.7.949.g2221a6
WARNING: multiple messages have this Message-ID
From: Joe Perches <joe@perches.com>
To: linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
Ralf Baechle <ralf@linux-mips.org>,
linux-mips@linux-mips.org
Subject: [PATCH] arch/mips/: Spelling fixes
Date: Mon, 17 Dec 2007 11:30:08 -0800 [thread overview]
Message-ID: <1197919875-5288-9-git-send-email-joe@perches.com> (raw)
Message-ID: <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com> (raw)
Signed-off-by: Joe Perches <joe@perches.com>
---
arch/mips/au1000/mtx-1/board_setup.c | 2 +-
arch/mips/kernel/binfmt_elfn32.c | 2 +-
arch/mips/kernel/binfmt_elfo32.c | 2 +-
arch/mips/kernel/kspd.c | 2 +-
arch/mips/kernel/setup.c | 4 ++--
arch/mips/kernel/smtc.c | 6 +++---
arch/mips/mm/c-r4k.c | 2 +-
arch/mips/sgi-ip27/ip27-hubio.c | 2 +-
8 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index abfc4bc..310d5df 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -99,7 +99,7 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
#endif
if (assert && devsel != 0) {
- // supress signal to cardbus
+ // suppress signal to cardbus
au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
}
else {
diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c
index 9b34238..77db347 100644
--- a/arch/mips/kernel/binfmt_elfn32.c
+++ b/arch/mips/kernel/binfmt_elfn32.c
@@ -98,7 +98,7 @@ static __inline__ void
jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
{
/*
- * Convert jiffies to nanoseconds and seperate with
+ * Convert jiffies to nanoseconds and separate with
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c
index da41eac..08f4cd7 100644
--- a/arch/mips/kernel/binfmt_elfo32.c
+++ b/arch/mips/kernel/binfmt_elfo32.c
@@ -100,7 +100,7 @@ static inline void
jiffies_to_compat_timeval(unsigned long jiffies, struct compat_timeval *value)
{
/*
- * Convert jiffies to nanoseconds and seperate with
+ * Convert jiffies to nanoseconds and separate with
* one divide.
*/
u64 nsec = (u64)jiffies * TICK_NSEC;
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index d2c2e00..1630784 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -222,7 +222,7 @@ void sp_work_handle_request(void)
}
}
- /* Run the syscall at the priviledge of the user who loaded the
+ /* Run the syscall at the privilege of the user who loaded the
SP program */
if (vpe_getuid(tclimit))
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7f6ddcb..ddc2d6d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -423,13 +423,13 @@ static void __init bootmem_init(void)
#endif /* CONFIG_SGI_IP27 */
/*
- * arch_mem_init - initialize memory managment subsystem
+ * arch_mem_init - initialize memory management subsystem
*
* o plat_mem_setup() detects the memory configuration and will record detected
* memory areas using add_memory_region.
*
* At this stage the memory configuration of the system is known to the
- * kernel but generic memory managment system is still entirely uninitialized.
+ * kernel but generic memory management system is still entirely uninitialized.
*
* o bootmem_init()
* o sparse_init()
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 9c92d42..37ee189 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -66,7 +66,7 @@ asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
static atomic_t ipi_timer_latch[NR_CPUS];
/*
- * Number of InterProcessor Interupt (IPI) message buffers to allocate
+ * Number of InterProcessor Interrupt (IPI) message buffers to allocate
*/
#define IPIBUF_PER_CPU 4
@@ -781,7 +781,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
if (type == SMTC_CLOCK_TICK)
atomic_inc(&ipi_timer_latch[cpu]);
- /* If not on same VPE, enqueue and send cross-VPE interupt */
+ /* If not on same VPE, enqueue and send cross-VPE interrupt */
smtc_ipi_nq(&IPIQ[cpu], pipi);
LOCK_CORE_PRA();
settc(cpu_data[cpu].tc_id);
@@ -1064,7 +1064,7 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)
return;
if (!cpu_has_vint)
- panic("SMTC Kernel requires Vectored Interupt support");
+ panic("SMTC Kernel requires Vectored Interrupt support");
set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 9355f1c..049ba7f 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1108,7 +1108,7 @@ static void __init setup_scache(void)
/*
* Do the probing thing on R4000SC and R4400SC processors. Other
* processors don't have a S-cache that would be relevant to the
- * Linux memory managment.
+ * Linux memory management.
*/
switch (c->cputype) {
case CPU_R4000SC:
diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c
index 524b371..a1fa4ab 100644
--- a/arch/mips/sgi-ip27/ip27-hubio.c
+++ b/arch/mips/sgi-ip27/ip27-hubio.c
@@ -168,7 +168,7 @@ static void hub_set_piomode(nasid_t nasid)
}
/*
- * hub_pio_init - PIO-related hub initalization
+ * hub_pio_init - PIO-related hub initialization
*
* @hub: hubinfo structure for our hub
*/
--
1.5.3.7.949.g2221a6
next reply other threads:[~2007-12-17 19:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <5703e57f925f31fc0eb38873bd7f10fc44f99cb4.1197918889.git.joe@perches.com>
2007-12-17 19:30 ` Joe Perches [this message]
2007-12-17 19:30 ` [PATCH] include/asm-arm/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/blackfin/: " Joe Perches
2007-12-17 19:49 ` [Uclinux-dist-devel] " Mike Frysinger
2007-12-17 19:30 ` [PATCH] arch/h8300/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/ia64/: " Joe Perches
2007-12-18 7:49 ` Jes Sorensen
2007-12-17 19:30 ` [PATCH] include/asm-ia64/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/m32r/: " Joe Perches
2007-12-17 19:30 ` [PATCH] arch/mips/: " Joe Perches
2007-12-17 19:56 ` [PATCH] include/asm-arm/: " J. Bruce Fields
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1197919875-5288-2-git-send-email-joe@perches.com \
--to=joe@perches.com \
--cc=akpm@linux-foundation.org \
--cc=kernel@wantstofly.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®