From: "David.Wu" <david.wu@rock-chips.com>
To: Rob Herring <robh@kernel.org>
Cc: heiko@sntech.de, wsa@the-dreams.de, dianders@chromium.org,
andy.shevchenko@gmail.com, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org, briannorris@google.com,
davidriley@google.com, huangtao@rock-chips.com,
hl@rock-chips.com, xjq@rock-chips.com, zyw@rock-chips.com,
cf@rock-chips.com, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-i2c@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 7/9] dt-bindings: i2c: rk3x: add support for rk3399
Date: Fri, 6 May 2016 14:09:48 +0800 [thread overview]
Message-ID: <572C352C.50303@rock-chips.com> (raw)
In-Reply-To: <20160505221212.GA26820@rob-hp-laptop>
Hi Rob,
在 2016/5/6 6:12, Rob Herring 写道:
> On Wed, May 04, 2016 at 10:35:23PM +0800, David Wu wrote:
>> The bus clock and function clock are separated at rk3399,
>> and others use one clock as the bus clock and function clock.
>>
>> Signed-off-by: David Wu <david.wu@rock-chips.com>
>> ---
>> Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 16 +++++++++++++---
>> 1 file changed, 13 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
>> index 0b4a85f..82b6f6b 100644
>> --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
>> +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
>> @@ -6,10 +6,20 @@ RK3xxx SoCs.
>> Required properties :
>>
>> - reg : Offset and length of the register set for the device
>> - - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
>> - "rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
>> + - compatible: should be one of the followings
>
> s/followings/following:/
>
>> + - "rockchip,rk3066-i2c": for rk3066
>> + - "rockchip,rk3188-i2c": for rk3188
>> + - "rockchip,rk3228-i2c": for rk3228
>> + - "rockchip,rk3288-i2c": for rk3288
>> + - "rockchip,rk3399-i2c": for rk3399
>> - interrupts : interrupt number
>> - - clocks : parent clock
>> + - clocks: See ../clock/clock-bindings.txt
>> + - For older hardware (rk3066, rk3188, rk3228, rk3288):
>> + - There is one clock that's used both to derive the functional clock
>> + for the device and as the bus clock. REQUIRED.
>
> This is the required section, so REQUIRED is redundant.
>
>> + - For newer hardware (rk3399): specify by name
>> + - "i2c": REQUIRED. This is used to derive the functional clock.
>> + - "pclk": REQUIRED. This is the bus clock.equired on RK3066, RK3188 :
>
> This doesn't make sense. The first line says this applies to rk3399, but
> then here it is talking about other parts.
>
> And there's a typo.
>
Okay, I will remove the "equired on RK3066, RK3188 :".
>>
>> Required on RK3066, RK3188 :
>>
>> --
>> 1.9.1
>>
>>
>
>
>
next prev parent reply other threads:[~2016-05-06 6:09 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-04 14:13 [PATCH v7 0/9] add i2c driver supported " David Wu
2016-05-04 14:13 ` [PATCH v7 1/9] i2c: rk3x: add documentation to fields in "struct rk3x_i2c" David Wu
2016-05-04 23:45 ` Doug Anderson
2016-05-04 23:50 ` Doug Anderson
2016-05-04 14:13 ` [PATCH v7 2/9] i2c: rk3x: use struct "rk3x_i2c_calced_timings" David Wu
2016-05-05 22:55 ` Doug Anderson
2016-05-06 2:19 ` David.Wu
2016-05-04 14:13 ` [PATCH v7 3/9] i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd() David Wu
2016-05-05 22:55 ` Doug Anderson
2016-05-04 14:13 ` [PATCH v7 4/9] i2c: rk3x: Move setting STATE_START and add STATE_SETUP David Wu
2016-05-05 22:56 ` Doug Anderson
2016-05-06 3:20 ` David.Wu
2016-05-04 14:33 ` [PATCH v7 5/9] i2c: rk3x: Change SoC data to not use array David Wu
2016-05-05 21:36 ` Heiko Stübner
2016-05-05 22:57 ` Doug Anderson
2016-05-04 14:34 ` [PATCH v7 6/9] i2c: rk3x: Move spec timing data to "static const" structs David Wu
2016-05-05 22:58 ` Doug Anderson
2016-05-06 4:55 ` David.Wu
2016-05-04 14:35 ` [PATCH v7 7/9] dt-bindings: i2c: rk3x: add support for rk3399 David Wu
2016-05-05 22:12 ` Rob Herring
2016-05-06 6:09 ` David.Wu [this message]
2016-05-05 22:59 ` Doug Anderson
2016-05-04 14:36 ` [PATCH v7 8/9] i2c: rk3x: add i2c support for rk3399 soc David Wu
2016-05-05 23:00 ` Doug Anderson
2016-05-06 9:32 ` David.Wu
2016-05-06 18:00 ` Doug Anderson
2016-05-04 14:37 ` [PATCH v7 9/9] i2c: rk3x: support fast-mode plus for rk3399 David Wu
2016-05-05 23:02 ` Doug Anderson
2016-05-06 2:12 ` David.Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=572C352C.50303@rock-chips.com \
--to=david.wu@rock-chips.com \
--cc=andy.shevchenko@gmail.com \
--cc=briannorris@google.com \
--cc=cf@rock-chips.com \
--cc=davidriley@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=hl@rock-chips.com \
--cc=huangtao@rock-chips.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh@kernel.org \
--cc=wsa@the-dreams.de \
--cc=xjq@rock-chips.com \
--cc=zyw@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome