From: "Jan Beulich" <JBeulich@suse.com>
To: "David Vrabel" <david.vrabel@citrix.com>,
"Boris Ostrovsky" <boris.ostrovsky@oracle.com>,
"Juergen Gross" <JGross@suse.com>
Cc: "xen-devel" <xen-devel@lists.xenproject.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 7/7] xen-pciback: drop superfluous variables
Date: Wed, 06 Jul 2016 01:00:14 -0600 [thread overview]
Message-ID: <577CC89E02000078000FB803@prv-mh.provo.novell.com> (raw)
In-Reply-To: <577CC59602000078000FB7A0@prv-mh.provo.novell.com>
req_start is simply an alias of the "offset" function parameter, and
req_end is being used just once in each function. (And both variables
were loop invariant anyway, so should at least have got initialized
outside the loop.)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
---
drivers/xen/xen-pciback/conf_space.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
--- 4.7-rc6-xen-pciback.orig/drivers/xen/xen-pciback/conf_space.c
+++ 4.7-rc6-xen-pciback/drivers/xen/xen-pciback/conf_space.c
@@ -148,7 +148,7 @@ int xen_pcibk_config_read(struct pci_dev
struct xen_pcibk_dev_data *dev_data = pci_get_drvdata(dev);
const struct config_field_entry *cfg_entry;
const struct config_field *field;
- int req_start, req_end, field_start, field_end;
+ int field_start, field_end;
/* if read fails for any reason, return 0
* (as if device didn't respond) */
u32 value = 0, tmp_val;
@@ -178,12 +178,10 @@ int xen_pcibk_config_read(struct pci_dev
list_for_each_entry(cfg_entry, &dev_data->config_fields, list) {
field = cfg_entry->field;
- req_start = offset;
- req_end = offset + size;
field_start = OFFSET(cfg_entry);
field_end = OFFSET(cfg_entry) + field->size;
- if (req_end > field_start && field_end > req_start) {
+ if (offset + size > field_start && field_end > offset) {
err = conf_space_read(dev, cfg_entry, field_start,
&tmp_val);
if (err)
@@ -191,7 +189,7 @@ int xen_pcibk_config_read(struct pci_dev
value = merge_value(value, tmp_val,
get_mask(field->size),
- field_start - req_start);
+ field_start - offset);
}
}
@@ -211,7 +209,7 @@ int xen_pcibk_config_write(struct pci_de
const struct config_field_entry *cfg_entry;
const struct config_field *field;
u32 tmp_val;
- int req_start, req_end, field_start, field_end;
+ int field_start, field_end;
if (unlikely(verbose_request))
printk(KERN_DEBUG
@@ -224,19 +222,17 @@ int xen_pcibk_config_write(struct pci_de
list_for_each_entry(cfg_entry, &dev_data->config_fields, list) {
field = cfg_entry->field;
- req_start = offset;
- req_end = offset + size;
field_start = OFFSET(cfg_entry);
field_end = OFFSET(cfg_entry) + field->size;
- if (req_end > field_start && field_end > req_start) {
+ if (offset + size > field_start && field_end > offset) {
err = conf_space_read(dev, cfg_entry, field_start,
&tmp_val);
if (err)
break;
tmp_val = merge_value(tmp_val, value, get_mask(size),
- req_start - field_start);
+ offset - field_start);
err = conf_space_write(dev, cfg_entry, field_start,
tmp_val);
next prev parent reply other threads:[~2016-07-06 7:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-06 6:47 [PATCH v4 0/7] xen-pciback: misc cleanup Jan Beulich
2016-07-06 6:56 ` [PATCH v4 1/7] xen-pciback: drop unused function parameter of read_dev_bar() Jan Beulich
2016-07-06 6:57 ` [PATCH v4 2/7] xen-pciback: drop rom_init() Jan Beulich
2016-07-06 6:57 ` [PATCH v4 3/7] xen-pciback: fold read_dev_bar() into its now single caller Jan Beulich
2016-07-06 6:58 ` [PATCH v4 4/7] xen-pciback: simplify determination of 64-bit memory resource Jan Beulich
2016-07-06 6:58 ` [PATCH v4 5/7] xen-pciback: use const and unsigned in bar_init() Jan Beulich
2016-07-06 6:59 ` [PATCH v4 6/7] xen-pciback: short-circuit read path used for merging write values Jan Beulich
2016-07-06 7:00 ` Jan Beulich [this message]
2016-07-06 9:41 ` [Xen-devel] [PATCH v4 0/7] xen-pciback: misc cleanup David Vrabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=577CC89E02000078000FB803@prv-mh.provo.novell.com \
--to=jbeulich@suse.com \
--cc=JGross@suse.com \
--cc=boris.ostrovsky@oracle.com \
--cc=david.vrabel@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®