From: Nicolas Ferre <nicolas.ferre@microchip.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>,
Alexander Dahl <ada@thorsis.com>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>,
<stable@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
Oleksij Rempel <ore@pengutronix.de>
Subject: Re: [PATCH] ARM: dts: at91-sama5d27_som1: fix phy address to 7
Date: Tue, 23 Mar 2021 12:17:10 +0100 [thread overview]
Message-ID: <580984ef-41fe-62d0-ad30-f707a6669a13@microchip.com> (raw)
In-Reply-To: <ddedd53b-6087-f7a5-3c41-2b91fec35980@pengutronix.de>
Alexander, Ahmad,
On 23/03/2021 at 11:55, Ahmad Fatoum wrote:
> Hello Alexander,
>
> On 23.03.21 11:45, Alexander Dahl wrote:
>> Hei hei,
>>
>> I could not get ethernet to work on SAMA5D27-SOM1-EK1 with kernels v5.10 and v5.11 built by a recent ptxdist based DistroKit BSP, while it used to work with an older v4.19 kernel. Just applying this patch to the tree made ethernet working again, thus:
>>
>> Tested-by: Alexander Dahl <ada@thorsis.com>
>>
>> Not sure why it worked with that older kernel, though.
>
> Thanks for investigating! Seems that somehow PHY broadcast worked on this
> board with older kernels (and current barebox), but no longer does with
> newer kernels.
>
> A bisection could shed some light onto what broke this.
>
> As the KSZ8081 driver disables broadcast in the phy config init, this change
> looks appropriate regardless. The fixes tag doesn't refer to an upstream
> commit though. This should probably read:
> Fixes: af690fa37e39 ("ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support")
I didn't noticed that on my side.
> With this addressed:
>
> Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Thanks a lot for your feedback.
> You could send a proper patch and stick your S-o-b under it.
Actually this patch is already in arm-soc tree here:
https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/commit/?h=arm/fixes&id=221c3a09ddf70a0a51715e6c2878d8305e95c558
So I cannot add tags anymore to it, sorry.
Best regards,
Nicolas
>> I added Ahmad to Cc, he added board support to DistroKit for that board, and might want to know. And I added the devicetree list to Cc, I wondered why the patch was not there and get_maintainers.pl proposed it.
>>
>> Thanks for fixing this and greetings
>> Alex
>>
>>> nicolas.ferre@microchip.com hat am 17.02.2021 12:38 geschrieben:
>>>
>>>
>>> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>>>
>>> Fix the phy address to 7 for Ethernet PHY on SAMA5D27 SOM1. No
>>> connection established if phy address 0 is used.
>>>
>>> The board uses the 24 pins version of the KSZ8081RNA part, KSZ8081RNA
>>> pin 16 REFCLK as PHYAD bit [2] has weak internal pull-down. But at
>>> reset, connected to PD09 of the MPU it's connected with an internal
>>> pull-up forming PHYAD[2:0] = 7.
>>>
>>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>>> Fixes: 2f61929eb10a ("ARM: dts: at91: at91-sama5d27_som1: fix PHY ID")
>>> Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>>> Cc: <stable@vger.kernel.org> # 4.14+
>>> ---
>>> arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>> index 1b1163858b1d..e3251f3e3eaa 100644
>>> --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>> +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
>>> @@ -84,8 +84,8 @@ macb0: ethernet@f8008000 {
>>> pinctrl-0 = <&pinctrl_macb0_default>;
>>> phy-mode = "rmii";
>>>
>>> - ethernet-phy@0 {
>>> - reg = <0x0>;
>>> + ethernet-phy@7 {
>>> + reg = <0x7>;
>>> interrupt-parent = <&pioA>;
>>> interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
>>> pinctrl-names = "default";
>>> --
>>> 2.30.0
>>>
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
--
Nicolas Ferre
prev parent reply other threads:[~2021-03-23 11:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-17 11:38 nicolas.ferre
2021-03-23 10:45 ` Alexander Dahl
2021-03-23 10:55 ` Ahmad Fatoum
2021-03-23 11:17 ` Nicolas Ferre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=580984ef-41fe-62d0-ad30-f707a6669a13@microchip.com \
--to=nicolas.ferre@microchip.com \
--cc=a.fatoum@pengutronix.de \
--cc=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=ore@pengutronix.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®