[PATCH 0/2] Add bootph-all property to necessary nodes to enable ethernet boot for AM68-SK, J722s and AM62p-SK

[PATCH 0/2] Add bootph-all property to necessary nodes to enable ethernet boot for AM68-SK, J722s and AM62p-SK

[Chintan Vankar]

This series adds bootph-all property to necessary nodes to enable
ethernet boot support for AM68-SK, J722s and AM62p-SK.

This series is based on linux-next tagged next-20250106.

Chintan Vankar (2):
  arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary
    nodes to enable Ethernet boot
  arm64: dts: ti: k3-am62p5*/k3-j722s: Add bootph-all property to
    necessary nodes to enable Ethernet boot

 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 +++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts                | 2 ++
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts       | 5 +++++
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi       | 2 ++
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts                | 3 +++
 5 files changed, 15 insertions(+)

-- 
2.34.1

[PATCH 1/2] arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary nodes to enable Ethernet boot

[Chintan Vankar]

Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to necessary nodes for CPSW to enable those
nodes during SPL stage along with later boot stages for AM68-SK.

Signed-off-by: Chintan Vankar <c-vankar@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 5 +++++
 arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 ++
 2 files changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 11522b36e0ce..f1f8b228926d 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -333,6 +333,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
 			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
 			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	mcu_mdio_pins_default: mcu-mdio-default-pins {
@@ -340,6 +341,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins {
 			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
 			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
@@ -610,11 +612,13 @@ &main_sdhci1 {
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
+	bootph-all;
 };
 
 &davinci_mdio {
 	phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
@@ -624,6 +628,7 @@ phy0: ethernet-phy@0 {
 &cpsw_port1 {
 	phy-mode = "rgmii-rxid";
 	phy-handle = <&phy0>;
+	bootph-all;
 };
 
 &mcu_mcan0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index bc31266126d0..cfae226d3c63 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -154,12 +154,14 @@ mcu_conf: bus@40f00000 {
 		cpsw_mac_syscon: ethernet-mac-syscon@200 {
 			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
 			reg = <0x200 0x8>;
+			bootph-all;
 		};
 
 		phy_gmii_sel: phy@4040 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4040 0x4>;
 			#phy-cells = <1>;
+			bootph-all;
 		};
 
 	};
-- 
2.34.1

Re: [PATCH 1/2] arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary nodes to enable Ethernet boot

[Roger Quadros]

On 06/01/2025 14:31, Chintan Vankar wrote:
> Ethernet boot requires CPSW nodes to be present starting from R5 SPL
> stage. Add bootph-all property to necessary nodes for CPSW to enable those
> nodes during SPL stage along with later boot stages for AM68-SK.
> 
> Signed-off-by: Chintan Vankar <c-vankar@ti.com>

Reviewed-by: Roger Quadros <rogerq@@kernel.org>

-- 
cheers,
-roger

Re: [PATCH 1/2] arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary nodes to enable Ethernet boot

[Roger Quadros]

On 06/01/2025 14:31, Chintan Vankar wrote:
> Ethernet boot requires CPSW nodes to be present starting from R5 SPL
> stage. Add bootph-all property to necessary nodes for CPSW to enable those
> nodes during SPL stage along with later boot stages for AM68-SK.
> 
> Signed-off-by: Chintan Vankar <c-vankar@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 5 +++++
>  arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 ++
>  2 files changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> index 11522b36e0ce..f1f8b228926d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
> @@ -333,6 +333,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
>  			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
>  			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
>  		>;
> +		bootph-all;

Shouldn't bootph-all be the first property in the DT nodes?

>  	};
>  
>  	mcu_mdio_pins_default: mcu-mdio-default-pins {
> @@ -340,6 +341,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins {
>  			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
>  			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
>  		>;
> +		bootph-all;
>  	};
>  
>  	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
> @@ -610,11 +612,13 @@ &main_sdhci1 {
>  &mcu_cpsw {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
> +	bootph-all;
>  };
>  
>  &davinci_mdio {
>  	phy0: ethernet-phy@0 {
>  		reg = <0>;
> +		bootph-all;
>  		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
>  		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
>  		ti,min-output-impedance;
> @@ -624,6 +628,7 @@ phy0: ethernet-phy@0 {
>  &cpsw_port1 {
>  	phy-mode = "rgmii-rxid";
>  	phy-handle = <&phy0>;
> +	bootph-all;
>  };
>  
>  &mcu_mcan0 {
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index bc31266126d0..cfae226d3c63 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -154,12 +154,14 @@ mcu_conf: bus@40f00000 {
>  		cpsw_mac_syscon: ethernet-mac-syscon@200 {
>  			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
>  			reg = <0x200 0x8>;
> +			bootph-all;
>  		};
>  
>  		phy_gmii_sel: phy@4040 {
>  			compatible = "ti,am654-phy-gmii-sel";
>  			reg = <0x4040 0x4>;
>  			#phy-cells = <1>;
> +			bootph-all;
>  		};
>  
>  	};

-- 
cheers,
-roger

Re: [PATCH 1/2] arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary nodes to enable Ethernet boot

[Vankar, Chintan]

On 1/7/2025 7:34 PM, Roger Quadros wrote:
> 
> 
> On 06/01/2025 14:31, Chintan Vankar wrote:
>> Ethernet boot requires CPSW nodes to be present starting from R5 SPL
>> stage. Add bootph-all property to necessary nodes for CPSW to enable those
>> nodes during SPL stage along with later boot stages for AM68-SK.
>>
>> Signed-off-by: Chintan Vankar <c-vankar@ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 5 +++++
>>   arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 ++
>>   2 files changed, 7 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
>> index 11522b36e0ce..f1f8b228926d 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
>> @@ -333,6 +333,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
>>   			J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
>>   			J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
>>   		>;
>> +		bootph-all;
> 
> Shouldn't bootph-all be the first property in the DT nodes?

Hello Roger, You are correct that we used to add 'bootph-all' property
as the first property in DT nodes, but after seeing this comment of
Vignesh at here:
https://lore.kernel.org/r/79bc9fe7-0a35-4f07-b34e-367a4b1e1755@ti.com/,
I have moved it to the end of all required property.

> 
>>   	};
>>   
>>   	mcu_mdio_pins_default: mcu-mdio-default-pins {
>> @@ -340,6 +341,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins {
>>   			J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
>>   			J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
>>   		>;
>> +		bootph-all;
>>   	};
>>   
>>   	mcu_mcan0_pins_default: mcu-mcan0-default-pins {
>> @@ -610,11 +612,13 @@ &main_sdhci1 {
>>   &mcu_cpsw {
>>   	pinctrl-names = "default";
>>   	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
>> +	bootph-all;
>>   };
>>   
>>   &davinci_mdio {
>>   	phy0: ethernet-phy@0 {
>>   		reg = <0>;
>> +		bootph-all;
>>   		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
>>   		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
>>   		ti,min-output-impedance;
>> @@ -624,6 +628,7 @@ phy0: ethernet-phy@0 {
>>   &cpsw_port1 {
>>   	phy-mode = "rgmii-rxid";
>>   	phy-handle = <&phy0>;
>> +	bootph-all;
>>   };
>>   
>>   &mcu_mcan0 {
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> index bc31266126d0..cfae226d3c63 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>> @@ -154,12 +154,14 @@ mcu_conf: bus@40f00000 {
>>   		cpsw_mac_syscon: ethernet-mac-syscon@200 {
>>   			compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
>>   			reg = <0x200 0x8>;
>> +			bootph-all;
>>   		};
>>   
>>   		phy_gmii_sel: phy@4040 {
>>   			compatible = "ti,am654-phy-gmii-sel";
>>   			reg = <0x4040 0x4>;
>>   			#phy-cells = <1>;
>> +			bootph-all;
>>   		};
>>   
>>   	};
> 

Re: [PATCH 1/2] arm64: dts: ti: k3-am68-sk*: Add bootph-all property to necessary nodes to enable Ethernet boot

[Roger Quadros]

On 09/01/2025 09:01, Vankar, Chintan wrote:
> 
> 
> On 1/7/2025 7:34 PM, Roger Quadros wrote:
>>
>>
>> On 06/01/2025 14:31, Chintan Vankar wrote:
>>> Ethernet boot requires CPSW nodes to be present starting from R5 SPL
>>> stage. Add bootph-all property to necessary nodes for CPSW to enable those
>>> nodes during SPL stage along with later boot stages for AM68-SK.
>>>
>>> Signed-off-by: Chintan Vankar <c-vankar@ti.com>
>>> ---
>>>   arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts | 5 +++++
>>>   arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 ++
>>>   2 files changed, 7 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
>>> index 11522b36e0ce..f1f8b228926d 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
>>> +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
>>> @@ -333,6 +333,7 @@ J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */
>>>               J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */
>>>               J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */
>>>           >;
>>> +        bootph-all;
>>
>> Shouldn't bootph-all be the first property in the DT nodes?
> 
> Hello Roger, You are correct that we used to add 'bootph-all' property
> as the first property in DT nodes, but after seeing this comment of
> Vignesh at here:
> https://lore.kernel.org/r/79bc9fe7-0a35-4f07-b34e-367a4b1e1755@ti.com/,
> I have moved it to the end of all required property.

OK. Thanks for the clarification.

> 
>>
>>>       };
>>>         mcu_mdio_pins_default: mcu-mdio-default-pins {
>>> @@ -340,6 +341,7 @@ mcu_mdio_pins_default: mcu-mdio-default-pins {
>>>               J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */
>>>               J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */
>>>           >;
>>> +        bootph-all;
>>>       };
>>>         mcu_mcan0_pins_default: mcu-mcan0-default-pins {
>>> @@ -610,11 +612,13 @@ &main_sdhci1 {
>>>   &mcu_cpsw {
>>>       pinctrl-names = "default";
>>>       pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
>>> +    bootph-all;
>>>   };
>>>     &davinci_mdio {
>>>       phy0: ethernet-phy@0 {
>>>           reg = <0>;
>>> +        bootph-all;
>>>           ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
>>>           ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
>>>           ti,min-output-impedance;
>>> @@ -624,6 +628,7 @@ phy0: ethernet-phy@0 {
>>>   &cpsw_port1 {
>>>       phy-mode = "rgmii-rxid";
>>>       phy-handle = <&phy0>;
>>> +    bootph-all;
>>>   };
>>>     &mcu_mcan0 {
>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>>> index bc31266126d0..cfae226d3c63 100644
>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
>>> @@ -154,12 +154,14 @@ mcu_conf: bus@40f00000 {
>>>           cpsw_mac_syscon: ethernet-mac-syscon@200 {
>>>               compatible = "ti,am62p-cpsw-mac-efuse", "syscon";
>>>               reg = <0x200 0x8>;
>>> +            bootph-all;
>>>           };
>>>             phy_gmii_sel: phy@4040 {
>>>               compatible = "ti,am654-phy-gmii-sel";
>>>               reg = <0x4040 0x4>;
>>>               #phy-cells = <1>;
>>> +            bootph-all;
>>>           };
>>>         };
>>

-- 
cheers,
-roger

[PATCH 2/2] arm64: dts: ti: k3-am62p5*/k3-j722s: Add bootph-all property to necessary nodes to enable Ethernet boot

[Chintan Vankar]

Ethernet boot requires CPSW nodes to be present starting from R5 SPL
stage. Add bootph-all property to necessary nodes for CPSW to enable those
nodes during SPL stage along with later boot stages for AM62p-SK and
J722s.

Signed-off-by: Chintan Vankar <c-vankar@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 +++
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts                | 2 ++
 arch/arm64/boot/dts/ti/k3-j722s-evm.dts                | 3 +++
 3 files changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 6e3beb5c2e01..96ddc5c17991 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -50,6 +50,7 @@ phy_gmii_sel: phy@4044 {
 			compatible = "ti,am654-phy-gmii-sel";
 			reg = <0x4044 0x8>;
 			#phy-cells = <1>;
+			bootph-all;
 		};
 
 		epwm_tbclk: clock-controller@4130 {
@@ -714,6 +715,7 @@ ethernet-ports {
 			#size-cells = <0>;
 
 			cpsw_port1: port@1 {
+				bootph-all;
 				reg = <1>;
 				ti,mac-only;
 				label = "port1";
@@ -742,6 +744,7 @@ cpsw3g_mdio: mdio@f00 {
 			clock-names = "fck";
 			bus_freq = <1000000>;
 			status = "disabled";
+			bootph-all;
 		};
 
 		cpts@3d000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index ad71d2f27f53..28b08eb79da3 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -226,6 +226,7 @@ main_mdio1_pins_default: main-mdio1-default-pins {
 			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
 			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	main_mmc1_pins_default: main-mmc1-default-pins {
@@ -495,6 +496,7 @@ &cpsw3g_mdio {
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 796287c76b69..1785c9848664 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -303,6 +303,7 @@ mdio_pins_default: mdio-default-pins {
 			J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
 			J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
 		>;
+		bootph-all;
 	};
 
 	ospi0_pins_default: ospi0-default-pins {
@@ -337,6 +338,7 @@ J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */
 			J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
 			J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
 		>;
+		bootph-all;
 	};
 
 	main_usb1_pins_default: main-usb1-default-pins {
@@ -374,6 +376,7 @@ &cpsw3g_mdio {
 
 	cpsw3g_phy0: ethernet-phy@0 {
 		reg = <0>;
+		bootph-all;
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		ti,min-output-impedance;
-- 
2.34.1

Re: [PATCH 2/2] arm64: dts: ti: k3-am62p5*/k3-j722s: Add bootph-all property to necessary nodes to enable Ethernet boot

[Roger Quadros]

On 06/01/2025 14:31, Chintan Vankar wrote:
> Ethernet boot requires CPSW nodes to be present starting from R5 SPL
> stage. Add bootph-all property to necessary nodes for CPSW to enable those
> nodes during SPL stage along with later boot stages for AM62p-SK and
> J722s.
> 
> Signed-off-by: Chintan Vankar <c-vankar@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 +++
>  arch/arm64/boot/dts/ti/k3-am62p5-sk.dts                | 2 ++
>  arch/arm64/boot/dts/ti/k3-j722s-evm.dts                | 3 +++
>  3 files changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> index 6e3beb5c2e01..96ddc5c17991 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> @@ -50,6 +50,7 @@ phy_gmii_sel: phy@4044 {
>  			compatible = "ti,am654-phy-gmii-sel";
>  			reg = <0x4044 0x8>;
>  			#phy-cells = <1>;
> +			bootph-all;


Shouldn't bootph-all be the first property in the DT node?

>  		};
>  
>  		epwm_tbclk: clock-controller@4130 {
> @@ -714,6 +715,7 @@ ethernet-ports {
>  			#size-cells = <0>;
>  
>  			cpsw_port1: port@1 {
> +				bootph-all;
>  				reg = <1>;
>  				ti,mac-only;
>  				label = "port1";
> @@ -742,6 +744,7 @@ cpsw3g_mdio: mdio@f00 {
>  			clock-names = "fck";
>  			bus_freq = <1000000>;
>  			status = "disabled";
> +			bootph-all;
>  		};
>  
>  		cpts@3d000 {
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> index ad71d2f27f53..28b08eb79da3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> @@ -226,6 +226,7 @@ main_mdio1_pins_default: main-mdio1-default-pins {
>  			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
>  			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
>  		>;
> +		bootph-all;
>  	};
>  
>  	main_mmc1_pins_default: main-mmc1-default-pins {
> @@ -495,6 +496,7 @@ &cpsw3g_mdio {
>  
>  	cpsw3g_phy0: ethernet-phy@0 {
>  		reg = <0>;
> +		bootph-all;
>  		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
>  		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
>  		ti,min-output-impedance;
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> index 796287c76b69..1785c9848664 100644
> --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
> @@ -303,6 +303,7 @@ mdio_pins_default: mdio-default-pins {
>  			J722S_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AC24) MDIO0_MDC */
>  			J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
>  		>;
> +		bootph-all;
>  	};
>  
>  	ospi0_pins_default: ospi0-default-pins {
> @@ -337,6 +338,7 @@ J722S_IOPAD(0x0140, PIN_OUTPUT, 0) /* (AF24) RGMII1_TD3 */
>  			J722S_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AG26) RGMII1_TXC */
>  			J722S_IOPAD(0x012c, PIN_OUTPUT, 0) /* (AF25) RGMII1_TX_CTL */
>  		>;
> +		bootph-all;
>  	};
>  
>  	main_usb1_pins_default: main-usb1-default-pins {
> @@ -374,6 +376,7 @@ &cpsw3g_mdio {
>  
>  	cpsw3g_phy0: ethernet-phy@0 {
>  		reg = <0>;
> +		bootph-all;
>  		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
>  		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
>  		ti,min-output-impedance;

-- 
cheers,
-roger

Re: [PATCH 2/2] arm64: dts: ti: k3-am62p5*/k3-j722s: Add bootph-all property to necessary nodes to enable Ethernet boot

[Roger Quadros]

On 06/01/2025 14:31, Chintan Vankar wrote:
> Ethernet boot requires CPSW nodes to be present starting from R5 SPL
> stage. Add bootph-all property to necessary nodes for CPSW to enable those
> nodes during SPL stage along with later boot stages for AM62p-SK and
> J722s.
> 
> Signed-off-by: Chintan Vankar <c-vankar@ti.com>

Reviewed-by: Roger Quadros <rogerq@kernel.org>